summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/mshyperv.h
Commit message (Collapse)AuthorAgeFilesLines
* x86/Hyper-V/hv_apic: Build the Hyper-V APIC conditionallyThomas Gleixner2018-05-191-1/+6
| | | | | | | | | | | | | | | | | | | | | | The Hyper-V APIC code is built when CONFIG_HYPERV is enabled but the actual code in that file is guarded with CONFIG_X86_64. There is no point in doing this. Neither is there a point in having the CONFIG_HYPERV guard in there because the containing directory is not built when CONFIG_HYPERV=n. Further for the hv_init_apic() function a stub is provided only for CONFIG_HYPERV=n, which is pointless as the callsite is not compiled at all. But for X86_32 the stub is missing and the build fails. Clean that up: - Compile hv_apic.c only when CONFIG_X86_64=y - Make the stub for hv_init_apic() available when CONFG_X86_64=n Fixes: 6b48cb5f8347 ("X86/Hyper-V: Enlighten APIC access") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com>
* X86/Hyper-V: Consolidate the allocation of the hypercall input pageK. Y. Srinivasan2018-05-191-1/+0
| | | | | | | | | | | | | | | | | | | Consolidate the allocation of the hypercall input page. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: olaf@aepfle.de Cc: sthemmin@microsoft.com Cc: gregkh@linuxfoundation.org Cc: jasowang@redhat.com Cc: Michael.H.Kelley@microsoft.com Cc: hpa@zytor.com Cc: apw@canonical.com Cc: devel@linuxdriverproject.org Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180516215334.6547-5-kys@linuxonhyperv.com
* X86/Hyper-V: Enhanced IPI enlightenmentK. Y. Srinivasan2018-05-191-0/+33
| | | | | | | | | | | | | | | | | | | Support enhanced IPI enlightenments (to target more than 64 CPUs). Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: olaf@aepfle.de Cc: sthemmin@microsoft.com Cc: gregkh@linuxfoundation.org Cc: jasowang@redhat.com Cc: Michael.H.Kelley@microsoft.com Cc: hpa@zytor.com Cc: apw@canonical.com Cc: devel@linuxdriverproject.org Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180516215334.6547-3-kys@linuxonhyperv.com
* X86/Hyper-V: Enable IPI enlightenmentsK. Y. Srinivasan2018-05-191-0/+1
| | | | | | | | | | | | | | | | | | | Hyper-V supports hypercalls to implement IPI; use them. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: olaf@aepfle.de Cc: sthemmin@microsoft.com Cc: gregkh@linuxfoundation.org Cc: jasowang@redhat.com Cc: Michael.H.Kelley@microsoft.com Cc: hpa@zytor.com Cc: apw@canonical.com Cc: devel@linuxdriverproject.org Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180516215334.6547-2-kys@linuxonhyperv.com
* X86/Hyper-V: Enlighten APIC accessK. Y. Srinivasan2018-05-191-1/+3
| | | | | | | | | | | | | | | | | | | | Hyper-V supports MSR based APIC access; implement the enlightenment. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: olaf@aepfle.de Cc: sthemmin@microsoft.com Cc: gregkh@linuxfoundation.org Cc: jasowang@redhat.com Cc: Michael.H.Kelley@microsoft.com Cc: hpa@zytor.com Cc: apw@canonical.com Cc: devel@linuxdriverproject.org Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180516215334.6547-1-kys@linuxonhyperv.com
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2018-04-091-78/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull kvm updates from Paolo Bonzini: "ARM: - VHE optimizations - EL2 address space randomization - speculative execution mitigations ("variant 3a", aka execution past invalid privilege register access) - bugfixes and cleanups PPC: - improvements for the radix page fault handler for HV KVM on POWER9 s390: - more kvm stat counters - virtio gpu plumbing - documentation - facilities improvements x86: - support for VMware magic I/O port and pseudo-PMCs - AMD pause loop exiting - support for AMD core performance extensions - support for synchronous register access - expose nVMX capabilities to userspace - support for Hyper-V signaling via eventfd - use Enlightened VMCS when running on Hyper-V - allow userspace to disable MWAIT/HLT/PAUSE vmexits - usual roundup of optimizations and nested virtualization bugfixes Generic: - API selftest infrastructure (though the only tests are for x86 as of now)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits) kvm: x86: fix a prototype warning kvm: selftests: add sync_regs_test kvm: selftests: add API testing infrastructure kvm: x86: fix a compile warning KVM: X86: Add Force Emulation Prefix for "emulate the next instruction" KVM: X86: Introduce handle_ud() KVM: vmx: unify adjacent #ifdefs x86: kvm: hide the unused 'cpu' variable KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown" kvm: Add emulation for movups/movupd KVM: VMX: raise internal error for exception during invalid protected mode state KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending KVM: x86: Fix misleading comments on handling pending exceptions KVM: x86: Rename interrupt.pending to interrupt.injected KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt x86/kvm: use Enlightened VMCS when running on Hyper-V x86/hyper-v: detect nested features x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits ...
| * x86/hyper-v: detect nested featuresVitaly Kuznetsov2018-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | TLFS 5.0 says: "Support for an enlightened VMCS interface is reported with CPUID leaf 0x40000004. If an enlightened VMCS interface is supported, additional nested enlightenments may be discovered by reading the CPUID leaf 0x4000000A (see 2.4.11)." Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
| * x86/hyper-v: allocate and use Virtual Processor Assist PagesVitaly Kuznetsov2018-03-281-0/+13
| | | | | | | | | | | | | | | | | | | | | | Virtual Processor Assist Pages usage allows us to do optimized EOI processing for APIC, enable Enlightened VMCS support in KVM and more. struct hv_vp_assist_page is defined according to the Hyper-V TLFS v5.0b. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
| * x86/hyper-v: move definitions from TLFS to hyperv-tlfs.hVitaly Kuznetsov2018-03-281-77/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | mshyperv.h now only contains fucntions/variables we define in kernel, all definitions from TLFS should go to hyperv-tlfs.h. 'enum hv_cpuid_function' is removed as we already have this info in hyperv-tlfs.h, code in mshyperv.c is adjusted accordingly. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
| * x86/hyper-v: move hyperv.h out of uapiVitaly Kuznetsov2018-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hyperv.h is not part of uapi, there are no (known) users outside of kernel. We are making changes to this file to match current Hyper-V Hypervisor Top-Level Functional Specification (TLFS, see: https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs) and we don't want to maintain backwards compatibility. Move the file renaming to hyperv-tlfs.h to avoid confusing it with mshyperv.h. In future, all definitions from TLFS should go to it and all kernel objects should go to mshyperv.h or include/linux/hyperv.h. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | Drivers: hv: vmbus: Implement Direct Mode for stimer0Michael Kelley2018-03-061-0/+13
|/ | | | | | | | | | | | | | | | | | | The 2016 version of Hyper-V offers the option to operate the guest VM per-vcpu stimer's in Direct Mode, which means the timer interupts on its own vector rather than queueing a VMbus message. Direct Mode reduces timer processing overhead in both the hypervisor and the guest, and avoids having timer interrupts pollute the VMbus interrupt stream for the synthetic NIC and storage. This patch enables Direct Mode by default on stimer0 when running on a version of Hyper-V that supports it. In prep for coming support of Hyper-V on ARM64, the arch independent portion of the code contains calls to routines that will be populated on ARM64 but are not needed and do nothing on x86. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2018-02-101-4/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
| * x86/hyperv: Reenlightenment notifications supportVitaly Kuznetsov2018-01-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
| * x86/hyperv: Add a function to read both TSC and TSC page value simulateneouslyVitaly Kuznetsov2018-01-301-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is going to be used from KVM code where both TSC and TSC page value are needed. Nothing is supposed to use the function when Hyper-V code is compiled out, just BUG(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-3-vkuznets@redhat.com
* | Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds2018-02-011-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
| * Drivers: hv: vmbus: Remove x86-isms from arch independent driversMichael Kelley2018-01-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hv_is_hypercall_page_setup() is used to check if Hyper-V is initialized, but a 'hypercall page' is an x86 implementation detail that isn't necessarily present on other architectures. Rename to the architecture independent hv_is_hyperv_initialized() and add check that x86_hyper is pointing to Hyper-V. Use this function instead of direct references to x86-specific data structures in vmbus_drv.c, and remove now redundant call in hv_init(). Also remove 'x86' from the string name passed to cpuhp_setup_state(). Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds2018-01-141-8/+10
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
| * x86/retpoline/hyperv: Convert assembler indirect jumpsDavid Woodhouse2018-01-121-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert all indirect jumps in hyperv inline asm code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk
* | Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds2017-11-161-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
| * Drivers: hv: vmbus: Make panic reporting to be more usefulK. Y. Srinivasan2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hyper-V allows the guest to report panic and the guest can pass additional information. All this is logged on the host. Currently Linux is passing back information that is not particularly useful. Make the following changes: 1. Windows uses crash MSR P0 to report bugcheck code. Follow the same convention for Linux as well. 2. It will be useful to know the gust ID of the Linux guest that has paniced. Pass back this information. These changes will help in better supporting Linux on Hyper-V Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/hyperv: Clear vCPU banks between calls to avoid flushing unneeded vCPUsVitaly Kuznetsov2017-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | hv_flush_pcpu_ex structures are not cleared between calls for performance reasons (they're variable size up to PAGE_SIZE each) but we must clear hv_vp_set.bank_contents part of it to avoid flushing unneeded vCPUs. The rest of the structure is formed correctly. To do the clearing in an efficient way stash the maximum possible vCPU number (this may differ from Linux CPU id). Reported-by: Jork Loeser <Jork.Loeser@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20171006154854.18092-1-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/asm: Fix inline asm call constraints for ClangJosh Poimboeuf2017-09-231-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For inline asm statements which have a CALL instruction, we list the stack pointer as a constraint to convince GCC to ensure the frame pointer is set up first: static inline void foo() { register void *__sp asm(_ASM_SP); asm("call bar" : "+r" (__sp)) } Unfortunately, that pattern causes Clang to corrupt the stack pointer. The fix is easy: convert the stack pointer register variable to a global variable. It should be noted that the end result is different based on the GCC version. With GCC 6.4, this patch has exactly the same result as before: defconfig defconfig-nofp distro distro-nofp before 9820389 9491555 8816046 8516940 after 9820389 9491555 8816046 8516940 With GCC 7.2, however, GCC's behavior has changed. It now changes its behavior based on the conversion of the register variable to a global. That somehow convinces it to *always* set up the frame pointer before inserting *any* inline asm. (Therefore, listing the variable as an output constraint is a no-op and is no longer necessary.) It's a bit overkill, but the performance impact should be negligible. And in fact, there's a nice improvement with frame pointers disabled: defconfig defconfig-nofp distro distro-nofp before 9796316 9468236 9076191 8790305 after 9796957 9464267 9076381 8785949 So in summary, while listing the stack pointer as an output constraint is no longer necessary for newer versions of GCC, it's still needed for older versions. Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2017-09-071-1/+146
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes include various Hyper-V optimizations such as faster hypercalls and faster/better TLB flushes - and there's also some Intel-MID cleanups" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/hyper-v: Trace hyperv_mmu_flush_tlb_others() x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls x86/platform/intel-mid: Make several arrays static, to make code smaller MAINTAINERS: Add missed file for Hyper-V x86/hyper-v: Use hypercall for remote TLB flush hyper-v: Globalize vp_index x86/hyper-v: Implement rep hypercalls hyper-v: Use fast hypercall for HVCALL_SIGNAL_EVENT x86/hyper-v: Introduce fast hypercall implementation x86/hyper-v: Make hv_do_hypercall() inline x86/hyper-v: Include hyperv/ only when CONFIG_HYPERV is set x86/platform/intel-mid: Make 'bt_sfi_data' const x86/platform/intel-mid: Make IRQ allocation a bit more flexible x86/platform/intel-mid: Group timers callbacks together
| * x86/hyper-v: Use hypercall for remote TLB flushVitaly Kuznetsov2017-08-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hyper-V host can suggest us to use hypercall for doing remote TLB flush, this is supposed to work faster than IPIs. Implementation details: to do HvFlushVirtualAddress{Space,List} hypercalls we need to put the input somewhere in memory and we don't really want to have memory allocation on each call so we pre-allocate per cpu memory areas on boot. pv_ops patching is happening very early so we need to separate hyperv_setup_mmu_ops() and hyper_alloc_mmu(). It is possible and easy to implement local TLB flushing too and there is even a hint for that. However, I don't see a room for optimization on the host side as both hypercall and native tlb flush will result in vmexit. The hint is also not set on modern Hyper-V versions. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-8-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * hyper-v: Globalize vp_indexVitaly Kuznetsov2017-08-101-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support implementing remote TLB flushing on Hyper-V with a hypercall we need to make vp_index available outside of vmbus module. Rename and globalize. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-7-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/hyper-v: Implement rep hypercallsVitaly Kuznetsov2017-08-101-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rep hypercalls are normal hypercalls which perform multiple actions at once. Hyper-V guarantees to return exectution to the caller in not more than 50us and the caller needs to use hypercall continuation. Touch NMI watchdog between hypercall invocations. This is going to be used for HvFlushVirtualAddressList hypercall for remote TLB flushing. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-6-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/hyper-v: Introduce fast hypercall implementationVitaly Kuznetsov2017-08-101-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hyper-V supports 'fast' hypercalls when all parameters are passed through registers. Implement an inline version of a simpliest of these calls: hypercall with one 8-byte input and no output. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-4-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/hyper-v: Make hv_do_hypercall() inlineVitaly Kuznetsov2017-08-101-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have only three call sites for hv_do_hypercall() and we're going to change HVCALL_SIGNAL_EVENT to doing fast hypercall so we can inline this function for optimization. Hyper-V top level functional specification states that r9-r11 registers and flags may be clobbered by the hypervisor during hypercall and with inlining this is somewhat important, add the clobbers. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-3-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/hyper-v: Include hyperv/ only when CONFIG_HYPERV is setVitaly Kuznetsov2017-08-101-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code is arch/x86/hyperv/ is only needed when CONFIG_HYPERV is set, the 'basic' support and detection lives in arch/x86/kernel/cpu/mshyperv.c which is included when CONFIG_HYPERVISOR_GUEST is set. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-2-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Revert "x86/hyper-v: include hyperv/ only when CONFIG_HYPERV is set"Greg Kroah-Hartman2017-07-201-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 2e252fbf777d3b1250b63a5bf45e2ac1932687d3 as it is obviously not correct. And it should have gone in through the x86 tree :( Reported-by: Colin King <colin.king@canonical.com> Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | x86/hyper-v: stash the max number of virtual/logical processorVitaly Kuznetsov2017-07-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | Max virtual processor will be needed for 'extended' hypercalls supporting more than 64 vCPUs. While on it, unify on 'Hyper-V' in mshyperv.c as we currently have a mix, report acquired misc features as well. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | x86/hyper-v: include hyperv/ only when CONFIG_HYPERV is setVitaly Kuznetsov2017-07-171-1/+6
|/ | | | | | | | | | | Code is arch/x86/hyperv/ is only needed when CONFIG_HYPERV is set, the 'basic' support and detection lives in arch/x86/kernel/cpu/mshyperv.c which is included when CONFIG_HYPERVISOR_GUEST is set. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds2017-07-031-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
| * Drivers: hv: vmbus: Get the current time from the current clocksourceK. Y. Srinivasan2017-05-251-1/+0
| | | | | | | | | | | | | | | | The current code uses the MSR based mechanism to get the current tick. Use the current clock source as that might be more optimal. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | x86/mshyperv: Remove excess #includes from mshyperv.hThomas Gleixner2017-06-241-2/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on <linux/atomic.h>. Remove the includes and unbreak the build. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/hyperv: Move TSC reading method to asm/mshyperv.hVitaly Kuznetsov2017-03-111-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As a preparation to making Hyper-V TSC page suitable for vDSO move the TSC page reading logic to asm/mshyperv.h. While on it, do the following: - Document the reading algorithm. - Simplify the code a bit. - Add explicit READ_ONCE() to not rely on 'volatile'. - Add explicit barriers to prevent re-ordering (we need to read sequence strictly before and after) - Use mul_u64_u64_shr() instead of assembly, gcc generates a single 'mul' instruction on x86_64 anyway. [ tglx: Simplified the loop ] Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: devel@linuxdriverproject.org Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: virtualization@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170303132142.25595-3-vkuznets@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/hyperv: Implement hv_get_tsc_page()Vitaly Kuznetsov2017-03-111-0/+8
| | | | | | | | | | | | | | | | | | To use Hyper-V TSC page clocksource from vDSO we need to make tsc_pg available. Implement hv_get_tsc_page() and add CONFIG_HYPERV_TSCPAGE to make #ifdef-s simple. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: devel@linuxdriverproject.org Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: virtualization@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170303132142.25595-2-vkuznets@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* hv: export current Hyper-V clocksourceVitaly Kuznetsov2017-02-101-0/+3
| | | | | | | | | | As a preparation to implementing Hyper-V PTP device supporting .getcrosststamp we need to export a reference to the current Hyper-V clocksource in use (MSR or TSC page). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: Fix the bug in generating the guest IDK. Y. Srinivasan2017-02-101-2/+2
| | | | | | | | | Fix the bug in the generation of the guest ID. Without this fix the host side telemetry code is broken. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Fixes: 352c9624242d ("Drivers: hv: vmbus: Move the definition of generate_guest_id()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: restore hypervcall page cleanup before kexecVitaly Kuznetsov2017-01-311-0/+1
| | | | | | | | | | | | We need to cleanup the hypercall page before doing kexec/kdump or the new kernel may crash if it tries to use it. Reuse the now-empty hv_cleanup function renaming it to hyperv_cleanup and moving to the arch specific code. Fixes: 8730046c1498 ("Drivers: hv vmbus: Move Hypercall page setup out of common code") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Define an APIs to manage interrupt stateK. Y. Srinivasan2017-01-201-0/+3
| | | | | | | | As part of cleaning up architecture specific code, define APIs to manage interrupt state. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Define an API to retrieve virtual processor indexK. Y. Srinivasan2017-01-201-0/+2
| | | | | | | | As part of cleaning up architecture specific code, define an API to retrieve the virtual procesor index. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Define APIs to manipulate the synthetic interrupt controllerK. Y. Srinivasan2017-01-201-0/+3
| | | | | | | | As part of cleaning up architecture specific code, define APIs to manipulate the interrupt controller state. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Define APIs to manipulate the event pageK. Y. Srinivasan2017-01-201-0/+3
| | | | | | | | As part of cleaning up architecture specific code, define APIs to manipulate the event page. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Define APIs to manipulate the message pageK. Y. Srinivasan2017-01-201-0/+3
| | | | | | | | As part of cleaning up architecture specific code, define APIs to manipulate the message page. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Restructure the clockevents codeK. Y. Srinivasan2017-01-201-0/+4
| | | | | | | | Move the relevant code that programs the hypervisor to an architecture specific file. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Move the code to signal end of messageK. Y. Srinivasan2017-01-201-0/+37
| | | | | | | | As part of the effort to separate out architecture specific code, move the code for signaling end of message. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Move the check for hypercall page setupK. Y. Srinivasan2017-01-201-0/+1
| | | | | | | | As part of the effort to separate out architecture specific code, move the check for detecting if the hypercall page is setup. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Move the crash notification functionK. Y. Srinivasan2017-01-201-0/+1
| | | | | | | | As part of the effort to separate out architecture specific code, move the crash notification function. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 12:05:03 +0000