summaryrefslogtreecommitdiffstats
path: root/drivers/bus
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'v4.17-rc5' into irq/core, to pick up fixesIngo Molnar2018-05-141-0/+1
|\ | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * HISI LPC: Add Kconfig MFD_CORE dependencyJohn Garry2018-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For ACPI support of the HiSilicon LPC driver we depend on MFD_CORE config. Currently the HiSi LPC Kconfig entry does not define this dependency, so add it. The reason for depending on MFD_CORE in the driver is that we model the LPC host as an MFD, in that a platform device will be created for each device on the bus. We do this as we need to modify the resources of these derived platform devices, something which we should not do to the original devices created in the ACPI scan. Details in e0aa1563f894 ("HISI LPC: Add ACPI support"). Fixes: e0aa1563f894 ("HISI LPC: Add ACPI support") Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | genirq/msi: Limit level-triggered MSI to platform devicesMarc Zyngier2018-05-131-0/+2
|/ | | | | | | | | | | | | | | | | | Nobody would be insane enough to try and use level triggered MSIs on PCI, but let's make sure it doesn't happen. Also, let's mandate that the irqchip backing the platform MSI domain is providing the IRQCHIP_SUPPORTS_LEVEL_MSI flag. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-3-marc.zyngier@arm.com
* Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds2018-04-063-0/+625
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
| * HISI LPC: Add ACPI supportJohn Garry2018-04-041-4/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the previous patches, this patch supports the LPC host on Hip06/Hip07 for ACPI FW. It is the responsibility of the LPC host driver to enumerate the child devices, as the ACPI scan code will not enumerate children of "indirect IO" hosts. The ACPI table for the LPC host controller and the child devices is in the following format: Device (LPC0) { Name (_HID, "HISI0191") // HiSi LPC Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, 0xa01b0000, 0x1000) }) } Device (LPC0.IPMI) { Name (_HID, "IPI0001") Name (LORS, ResourceTemplate() { QWordIO ( ResourceConsumer, MinNotFixed, // _MIF MaxNotFixed, // _MAF PosDecode, EntireRange, 0x0, // _GRA 0xe4, // _MIN 0x3fff, // _MAX 0x0, // _TRA 0x04, // _LEN , , BTIO ) }) Since the IO resources of the child devices need to be translated from LPC bus addresses to logical PIO addresses, and we shouldn't modify the resources of the devices generated in the FW scan, a per-child MFD is created as a substitute. The MFD IO resources will be the translated bus addresses of the ACPI child. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindingsZhichang Yuan2018-04-043-0/+424
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The low-pin-count (LPC) interface of Hip06/Hip07 accesses I/O port space of peripherals. Implement the LPC host controller driver which performs the I/O operations on the underlying hardware. We don't want to touch existing drivers such as ipmi-bt, so this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched by the I/O accessors to retrieve the host-local I/O port. The driver config is set as a bool instead of a tristate. The reason here is that, by the very nature of the driver providing a logical PIO range, it does not make sense to have this driver as a loadable module. Another more specific reason is that the Huawei D03 board which includes Hip06 SoC requires the LPC bus for UART console, so should be built in. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Zou Rongrong <zourongrong@huawei.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org> # dts part
* | Merge tag 'armsoc-drivers' of ↵Linus Torvalds2018-04-054-3384/+14
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
| * | perf/arm-cci: Untangle global cci_ctrl_baseRobin Murphy2018-03-061-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending directly on the bus driver's global cci_ctrl_base variable is a little unpleasant, and exporting it to allow the PMU driver to be modular would be even more so. Let's make things a little better abstracted by adding the control register block to the cci_pmu instance data alongside the PMU register block, and communicating the mapped address from the bus driver via platform data. It's not practical to try the same thing for the bus driver itself, given that the globals are entangled with the hairy assembly code for port control, so we leave them be there. It would however be prudent to move them to the __ro_after_init section in passing, since the addresses really should never be changing once set. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | bus/arm-cci: Streamline devicetree handling a bitRobin Murphy2018-03-061-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than iterating over child nodes explicitly testing for availability, we can just use the other helper which already subsumes that check. Also, the availability check is already NULL-safe, so get rid of a redundant check in cci_probe(), too. Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | drivers/bus: Split Arm CCI driverRobin Murphy2018-03-062-1771/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | drivers/bus: Move Arm CCN PMU driverRobin Murphy2018-03-063-1607/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm-ccn driver is purely a perf driver for the CCN PMU, not a bus driver in the sense of the other residents of drivers/bus/, so let's move it to the appropriate place for SoC PMU drivers. Not to mention moving the documentation accordingly as well. Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | Merge tag 'armsoc-soc' of ↵Linus Torvalds2018-04-051-33/+493
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
| * \ \ Merge tag 'omap-for-v4.17/ti-sysc-signed' of ↵Arnd Bergmann2018-03-071-33/+493
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Driver changes for ti-sysc for v4.17" from Tony Lindgren: This series of changes enables the use device tree based sysconfig data for ti-sysc driver. As we already have SmartReflex data configured, we use that as the first driver to enable. To do that in a way where SmartReflex is not probed twice, we need to prepare the SmartReflex driver before flipping dts data on for it in the last patch of the series. To avoid regressions, we are checking the passed dts data against existing platform data since we still have it available. Then after the dts files are converted, we can simply drop the related platform data at some point in the future. * tag 'omap-for-v4.17/ti-sysc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex PM / AVS: SmartReflex: Prepare to use device tree based probing ARM: OMAP2+: Try to parse earlycon from parent too ARM: OMAP2+: Add checks for device tree based sysconfig data ARM: OMAP2+: Add functions to allocate module data from device tree bus: ti-sysc: Handle some devices in omap_device compatible way bus: ti-sysc: Add support for platform data callbacks bus: ti-sysc: Remove unnecessary debugging statements bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init bus: ti-sysc: Handle stdout-path for debug console bus: ti-sysc: Add suspend and resume handling bus: ti-sysc: Add fck clock alias for children with notifier_block ARM: OMAP2+: Prepare to pass auxdata for smartreflex
| | * | bus: ti-sysc: Handle some devices in omap_device compatible wayTony Lindgren2018-02-261-3/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that ti-sysc can manage child devices, we must also be backwards compatible with the current omap_device code. With omap_device, we assume that the child device manages the interconnect target module directly. The drivers needing special handling are the ones that still set pm_runtime_irq_safe(). In the long run we want to update those drivers as otherwise they will cause problems with genpd as a permanent PM runtime usage count is set on the parent device. We can handle omap_device these devices by improving the ti-sysc quirk handling to detect the devices needing special handling based on register map and revision register if usable. We also need to implement dev_pm_domain for these child devices just like omap_device does. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | bus: ti-sysc: Add support for platform data callbacksTony Lindgren2018-02-261-14/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to pass the device tree configuration for interconnect target modules from ti-sysc driver to the existing platform hwmod code. This allows us to first validate the dts data against the existing platform data before we start dropping the platform data in favor of device tree data. To do this, let's add platform data callbacks for PM runtime functions to call for the interconnect target modules if platform data is available. Note that as ti-sysc driver can rebind, omap_auxdata_lookup and related functions can no longer be __init. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | bus: ti-sysc: Remove unnecessary debugging statementsTony Lindgren2018-02-261-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already show the status for the interconnect target module when debugging is enabled, there's no need to be more verbose about that. So let's just cut down the noise and remove the extra debug statements. Signed-off-by: Tony Lindgren <tony@atomide.coM>
| | * | bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-initTony Lindgren2018-02-261-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least earlycon needs a delayed idle before the 8250 driver probes to avoid glitches in the console output. Let's handle the delayed idle for devices tagged with ti,no-reset-on-init and ti,no-idle-on-init with delayed_work. Others don't need it, and there should be no need to use runtime PM autosuspend for the interconnect target driver as it's the child device drivers that should configure it. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | bus: ti-sysc: Handle stdout-path for debug consoleTony Lindgren2018-02-261-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If we have stdout-path specified for earlycon, we must prevent the debug console from idling until runtime PM kicks in. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | bus: ti-sysc: Add suspend and resume handlingTony Lindgren2018-02-261-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to idle the module on suspend after the children are suspended. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | bus: ti-sysc: Add fck clock alias for children with notifier_blockTony Lindgren2018-02-261-4/+87
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functional clock is used by several child device drivers to query the rate for the child device internal configuration. The functional clock is really for the whole interconnect target module, and not just for the child device, and can also be shared across multiple children. At least the timers, i2c and mmc driver query the fck for rate. So let's just create a clock alias for the child fck if it does not yet exits. We can do this with the BUS_NOTIFY_ADD_DEVICE before the child is probed. Note that we need to now also remove the legacy mode check for getting the dts clocks in ti-sysc driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge tag 'staging-4.17-rc1' of ↵Linus Torvalds2018-04-0415-0/+4902
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits) staging: rtl8723bs: Remove yield call, replace with cond_resched() staging: rtl8723bs: Replace yield() call with cond_resched() staging: rtl8723bs: Remove unecessary newlines from 'odm.h'. staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style. staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style. staging: rtl8723bs: Replace NULL pointer comparison with '!'. staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections. staging: rtl8723bs: Fix function signature that goes over 80 characters. staging: rtl8723bs: Fix lines too long in update_recvframe_attrib(). staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'. staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'. staging: rtl8723bs: Add missing braces in else statement. staging: rtl8723bs: Add spaces around ternary operators. staging: rtl8723bs: Fix lines with trailing open parentheses. staging: rtl8723bs: Remove unnecessary length #define's. staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants. staging: rtl8723bs: Fix alignment in rtw_wx_set_auth(). staging: rtl8723bs: Remove braces from single statement conditionals. staging: rtl8723bs: Remove unecessary braces from switch statement. staging: rtl8723bs: Fix newlines in rtw_wx_set_auth(). ...
| * | | bus: fsl-mc: add fsl_mc_allocator cleanup functionIoana Ciornei2018-03-232-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The userspace support for fsl-mc requires a fsl_mc_allocator cleanup function. Add the needed function. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | bus: fsl-mc: change mc_command in fsl_mc_commandIoana Ciornei2018-03-236-41/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "struct mc_command" is a very generic name for a global kernel structure. Change its name in "struct fsl_mc_command". Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | Merge 4.16-rc6 into staging-nextGreg Kroah-Hartman2018-03-191-1/+1
| |\| | | | | | | | | | | | | | | | | | | | | | We want the staging fixes in here as well to handle merge/test issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | staging: fsl-mc: Move DPCON out of stagingBogdan Purcareata2018-03-143-0/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the source files out of staging into their final locations: - dpcon.c goes to drivers/bus/fsl-mc/, next to the core infrastructure - dpcon-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next to the other internally used APIs - dpcon.h gets merged into include/linux/fsl/mc.h, exposing the public API Update references in the dpaa2-eth staging driver. DPCON stands for Data Path Concentrator - an interface between DPIO (Data Path IO) and its users (e.g. dpaa2-eth). You can read more about DPIO in Documentation/networking/dpaa2/overview.rst Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | staging: fsl-mc: Move DPBP out of stagingBogdan Purcareata2018-03-143-0/+226
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the source files out of staging into their final locations: - dpbp.c goes to drivers/bus/fsl-mc/, next to the core infrastructure - dpbp-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next to the other internally used APIs - dpbp.h gets merged into include/linux/fsl/mc.h, exposing the public API Update references in the dpaa2-eth staging driver. DPBP stands for Data Path Buffer Pool - you can read more about the object in Documentation/networking/dpaa2/overview.rst Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | staging: fsl-mc: merge fix for CONFIG_FSL_MC_BUS movingStephen Rothwell2018-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | staging: fsl-mc: Move core bus out of stagingBogdan Purcareata2018-02-2213-0/+4398
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the source files out of staging into their final locations: -mc.h include file in drivers/staging/fsl-mc/include go to include/linux/fsl -source files in drivers/staging/fsl-mc/bus go to drivers/bus/fsl-mc -overview.rst, providing an overview of DPAA2, goes to Documentation/networking/dpaa2/overview.rst Update or delete other remaining staging files -- Makefile, Kconfig, TODO. Update dpaa2_eth and dpio staging drivers. Add integration bits for the documentation build system. Signed-off-by: Stuart Yoder <stuyoder@gmail.com> [rebased, add dpaa2_eth and dpio #include updates] Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [rebased, split irqchip to separate patch] Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | perf: Fix sibling iterationPeter Zijlstra2018-03-162-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry") Reported-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: alexander.shishkin@linux.intel.com Cc: torvalds@linux-foundation.org Cc: alexey.budankov@linux.intel.com Cc: valery.cherepennikov@intel.com Cc: eranian@google.com Cc: acme@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: jolsa@redhat.com Link: https://lkml.kernel.org/r/20180315170129.GX4043@hirez.programming.kicks-ass.net
* | | perf/core: Remove perf_event::group_entryPeter Zijlstra2018-03-122-2/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | bus: ti-sysc: Fix checking of no-reset-on-init quirkTony Lindgren2018-02-151-1/+1
|/ | | | | | | | | | We are currently only checking for the first entry in the table while we should check them all. Usual no-idle-on-init is together with no-reset-on-init, so this has gone unnoticed. Fixes: 566a9b05e1fa ("bus: ti-sysc: Handle module quirks based dts configuration") Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2018-02-013-27/+469
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...
| * Merge tag 'omap-for-v4.16/ti-sysc-fix-signed' of ↵Arnd Bergmann2018-01-261-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers Pull "one ti-sysc driver fix for v4.16 merge window" from Tony Lindgren: One minor fix for ti-sysc smartreflex sysc mask that prevents idling the smartreflex interconnect target module for device tree based probing. * tag 'omap-for-v4.16/ti-sysc-fix-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix smartreflex sysc mask
| | * bus: ti-sysc: Fix smartreflex sysc maskTony Lindgren2018-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The enawakeup bit is in a different location for smartreflex compared to the "ti,sysc-omap2" compatible. Fixes: 70a65240efb1 ("bus: ti-sysc: Add register bits for interconnect target modules") Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | bus: omap: add MODULE_LICENSE tagsArnd Bergmann2018-01-112-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux-4.15 warns about missing MODULE_LICENSE tags such as these WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/omap_l3_noc.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/omap_l3_smx.o For completeness, I'm also adding MODULE_AUTHOR and MODULE_DESCRIPTION tags, but I decided to leave out the email addresses, as all three authors are working for other companies now. Cc: Sricharan R <sricharan@codeaurora.org> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'omap-for-v4.16/ti-sysc-signed' of ↵Olof Johansson2018-01-041-27/+458
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI sysc driver updates for v4.16 merge window We now have gotten ti-sysc driver to the point where it can parse interconnect target configuration from device tree instead of the legacy platform data. This series updates the device tree binding and adds parsing to the driver for quirks and capabilities. * tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add parsing of module capabilities bus: ti-sysc: Handle module quirks based dts configuration bus: ti-sysc: Detect i2c interconnect target module based on register layout bus: ti-sysc: Add register bits for interconnect target modules bus: ti-sysc: Make omap_hwmod_sysc_fields into sysc_regbits platform data ARM: OMAP2+: Move all omap_hwmod_sysc_fields to omap_hwmod_common_data.c ARM: dts: Add generic ti,sysc compatible in addition to the custom ones dt-bindings: ti-sysc: Update binding for timers and capabilities Signed-off-by: Olof Johansson <olof@lixom.net>
| | * bus: ti-sysc: Add parsing of module capabilitiesTony Lindgren2017-12-211-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to configure the interconnect target module based on the device three configuration. Let's also add a new quirk for SYSC_QUIRK_RESET_STATUS to indicate that the SYSCONFIG reset bit changes after the reset is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * bus: ti-sysc: Handle module quirks based dts configurationTony Lindgren2017-12-211-18/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's configure few module quirks via device tree using the properties for "ti,no-idle-on-init", "ti,no-reset-on-init" and "ti,sysc-delay-us". Let's also reorder the probe a bit so we have pdata available earlier, and move the PM runtime calls to sysc_init_module() from sysc_read_revision(). Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * bus: ti-sysc: Detect i2c interconnect target module based on register layoutTony Lindgren2017-12-211-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can easily detect i2c based on it's non-standard module registers that consist of two 32-bit registers accessed in 16-bit mode. So far we don't have other 16-bit modules, so there's currently no need to add a custom property for 16-bit register access. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * bus: ti-sysc: Add register bits for interconnect target modulesTony Lindgren2017-12-211-10/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's add data for the known interconnect target module types by mapping their register bits. Note that we can handle many quirks for the older omap2 type1 modules directly in the driver without a need for adding custom properties. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | |
| \ \
| \ \
| \ \
*---. \ \ Merge branches 'pm-domains', 'pm-kconfig', 'pm-cpuidle' and 'powercap'Rafael J. Wysocki2018-01-181-1/+1
|\ \ \ \ \ | | |_|/ / | |/| | / | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-domains: PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume() PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks PM / Domains: Remove obsolete "samsung,power-domain" check * pm-kconfig: bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate PM: Provide a config snippet for disabling PM * pm-cpuidle: cpuidle: Avoid NULL argument in cpuidle_switch_governor() * powercap: powercap: intel_rapl: Fix trailing semicolon powercap: add suspend and resume mechanism for SOC power limit powercap: Simplify powercap_init()
| | * / bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristatePaul Gortmaker2017-12-131-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig currently controlling compilation of this code is: config SIMPLE_PM_BUS bool "Simple Power-Managed Bus Driver" ...meaning that it currently is not being built as a module by anyone. In removing the orphaned modular support in a previous patch set, Geert indicated he'd rather see this code converted to tristate. I normally don't do that because it extends functionality that I can't easily run time test or even know if the use case makes sense, but since in this case the author has nominated it as such, we do the conversion here. Note that doesn't change the lack of run time testing ; this change is only tested for sucessful compile and modpost. [geert: Ethernet is probed successfully on sh73a0/kzm9g after insmodding simple-pm-bus.ko] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge tag 'sunxi-fixes-for-4.15' of ↵Arnd Bergmann2018-01-041-0/+1
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Pull "Allwinner fixes for 4.15" from Chen-Yu Tsai: First, one fix that adds proper regulator references for the EMAC external PHYs on A64 boards. The EMAC bindings were developed for 4.13, but reverted at the last minute. They were finalized and brought back for 4.15. However in the time between, regulator support for the A64 boards was merged. When EMAC device tree changes were reintroduced, this was not taken into account. Second, a patch that adds OF based modalias uevent for RSB slave devices. This has been missing since the introduction of RSB, and recently with PMIC regulator support introduced for the A64, has been seen affecting distributions, which have the all-important PMIC mfd drivers built as modules, which then don't get loaded. Other minor cleanups include final conversion of raw indices to CCU binding macros for sun[4567]i HDMI, cleanup of dummy regulators on the A64 SOPINE, a SD card detection polarity fix for the Orange Pi Zero Plus2, and adding a missing compatible for the PMIC on the TBS A711 tablet. * tag 'sunxi-fixes-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a711: Reinstate the PMIC compatible arm64: dts: orange-pi-zero-plus2: fix sdcard detect arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3 ARM: dts: sunxi: Convert to CCU index macros for HDMI controller sunxi-rsb: Include OF based modalias in device uevent arm64: allwinner: a64: add Ethernet PHY regulator for several boards
| * | sunxi-rsb: Include OF based modalias in device ueventStefan Brüns2017-12-051-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include the OF-based modalias in the uevent sent when registering devices on the sunxi RSB bus, so that user space has a chance to autoload the kernel module for the device. Fixes a regression caused by commit 3f241bfa60bd ("arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for the AXP803 PMIC is built as a module, it is not loaded and the system ends up with an disfunctional MMC controller. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Cc: stable <stable@vger.kernel.org> # 4.4.x 7a3b7cd332db of: device: Export of_device_{get_modalias, uvent_modalias} to modules Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | bus: arm-ccn: fix module unloading Error: Removing state 147 which has ↵Kim Phillips2017-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | instances left. Unregistering the driver before calling cpuhp_remove_multi_state() removes any remaining hotplug cpu instances so __cpuhp_remove_state_cpuslocked() doesn't emit this warning: [ 268.748362] Error: Removing state 147 which has instances left. [ 268.748373] ------------[ cut here ]------------ [ 268.748386] WARNING: CPU: 2 PID: 5476 at kernel/cpu.c:1734 __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748389] Modules linked in: arm_ccn(-) [last unloaded: arm_ccn] [ 268.748403] CPU: 2 PID: 5476 Comm: rmmod Tainted: G W 4.14.0-rc4+ #3 [ 268.748406] Hardware name: AMD Seattle/Seattle, BIOS 10:18:39 Dec 8 2016 [ 268.748410] task: ffff8001a18ca000 task.stack: ffff80019c120000 [ 268.748416] PC is at __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748421] LR is at __cpuhp_remove_state_cpuslocked+0x448/0x4f0 [ 268.748425] pc : [<ffff2000081729ec>] lr : [<ffff2000081729e0>] pstate: 60000145 [ 268.748427] sp : ffff80019c127d30 [ 268.748430] x29: ffff80019c127d30 x28: ffff8001a18ca000 [ 268.748437] x27: ffff20000c2cb000 x26: 1fffe4000042d490 [ 268.748443] x25: ffff20000216a480 x24: 0000000000000000 [ 268.748449] x23: ffff20000b08e000 x22: 0000000000000001 [ 268.748455] x21: 0000000000000093 x20: 00000000000016f8 [ 268.748460] x19: ffff20000c2cbb80 x18: 0000ffffb5fe7c58 [ 268.748466] x17: 00000000004402d0 x16: 1fffe40001864f01 [ 268.748472] x15: ffff20000c4bf8b0 x14: 0000000000000000 [ 268.748477] x13: 0000000000007032 x12: ffff20000829ae48 [ 268.748483] x11: ffff20000c4bf000 x10: 0000000000000004 [ 268.748488] x9 : 0000000000006fbc x8 : ffff20000c318a40 [ 268.748494] x7 : 0000000000000000 x6 : ffff040001864f02 [ 268.748500] x5 : 0000000000000000 x4 : 0000000000000000 [ 268.748505] x3 : 0000000000000007 x2 : dfff200000000000 [ 268.748510] x1 : 000000000000ad3d x0 : 00000000000001f0 [ 268.748516] Call trace: [ 268.748521] Exception stack(0xffff80019c127bf0 to 0xffff80019c127d30) [ 268.748526] 7be0: 00000000000001f0 000000000000ad3d [ 268.748531] 7c00: dfff200000000000 0000000000000007 0000000000000000 0000000000000000 [ 268.748535] 7c20: ffff040001864f02 0000000000000000 ffff20000c318a40 0000000000006fbc [ 268.748539] 7c40: 0000000000000004 ffff20000c4bf000 ffff20000829ae48 0000000000007032 [ 268.748544] 7c60: 0000000000000000 ffff20000c4bf8b0 1fffe40001864f01 00000000004402d0 [ 268.748548] 7c80: 0000ffffb5fe7c58 ffff20000c2cbb80 00000000000016f8 0000000000000093 [ 268.748553] 7ca0: 0000000000000001 ffff20000b08e000 0000000000000000 ffff20000216a480 [ 268.748557] 7cc0: 1fffe4000042d490 ffff20000c2cb000 ffff8001a18ca000 ffff80019c127d30 [ 268.748562] 7ce0: ffff2000081729e0 ffff80019c127d30 ffff2000081729ec 0000000060000145 [ 268.748566] 7d00: 00000000000001f0 0000000000000000 0001000000000000 0000000000000000 [ 268.748569] 7d20: ffff80019c127d30 ffff2000081729ec [ 268.748575] [<ffff2000081729ec>] __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748580] [<ffff200008172adc>] __cpuhp_remove_state+0x54/0x80 [ 268.748597] [<ffff20000215dd84>] arm_ccn_exit+0x2c/0x70 [arm_ccn] [ 268.748604] [<ffff20000834cfbc>] SyS_delete_module+0x5a4/0x708 [ 268.748607] Exception stack(0xffff80019c127ec0 to 0xffff80019c128000) [ 268.748612] 7ec0: 0000000019bb7258 0000000000000800 ba64d0fb3d26a800 00000000000000da [ 268.748616] 7ee0: 0000ffffb6144e28 0000ffffcd95b409 fefefefefefefeff 7f7f7f7f7f7f7f7f [ 268.748621] 7f00: 000000000000006a 1999999999999999 0000ffffb6179000 0000000000bbcc6d [ 268.748625] 7f20: 0000ffffb6176b98 0000ffffcd95c2d0 0000ffffb5fe7b58 0000ffffb6163000 [ 268.748630] 7f40: 0000ffffb60ad3e0 00000000004402d0 0000ffffb5fe7c58 0000000019bb71f0 [ 268.748634] 7f60: 0000ffffcd95c740 0000000000000000 0000000019bb71f0 0000000000416700 [ 268.748639] 7f80: 0000000000000000 00000000004402e8 0000000019bb6010 0000ffffcd95c748 [ 268.748643] 7fa0: 0000000000000000 0000ffffcd95c460 00000000004113a8 0000ffffcd95c460 [ 268.748648] 7fc0: 0000ffffb60ad3e8 0000000080000000 0000000019bb7258 000000000000006a [ 268.748652] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 268.748657] [<ffff200008084f9c>] __sys_trace_return+0x0/0x4 [ 268.748661] ---[ end trace a996d358dcaa7f9c ]--- Fixes: 8df038725ad5 ("bus/arm-ccn: Use cpu-hp's multi instance support instead custom list") Signed-off-by: Kim Phillips <kim.phillips@arm.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-cci: Fix use of smp_processor_id() in preemptible contextMarc Zyngier2017-12-041-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM CCI driver seem to be using smp_processor_id() in a preemptible context, which is likely to make a DEBUG_PREMPT kernel scream at boot time. Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug registration, making sure that we don't race against a CPU down operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: Fix use of smp_processor_id() in preemptible contextMarc Zyngier2017-12-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system results in the following splat: [...] arm-ccn e8000000.ccn: No access to interrupts, using timer. BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x1c/0x28 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111 Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017 Call trace: [<ffff000008089e78>] dump_backtrace+0x0/0x278 [<ffff00000808a22c>] show_stack+0x24/0x30 [<ffff000008bc3bc4>] dump_stack+0x8c/0xb0 [<ffff00000852b534>] check_preemption_disabled+0xfc/0x100 [<ffff00000852b554>] debug_smp_processor_id+0x1c/0x28 [<ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0 [...] as we use smp_processor_id() in the wrong context. Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug registration, making sure that we don't race against a CPU down operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: Simplify codeChristophe JAILLET2017-12-041-4/+2
| | | | | | | | | | | | | | | | Use 'devm_kasprintf()' to simplify the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: Check memory allocation failureChristophe JAILLET2017-12-041-0/+5
| | | | | | | | | | | | | | | | | | | | | | Check memory allocation failures and return -ENOMEM in such cases This avoids a potential NULL pointer dereference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: constify attribute_group structures.Arvind Yadav2017-12-041-4/+4
|/ | | | | | | | | | | | | | | | | attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9074 5592 416 15082 3aea drivers/bus/arm-ccn.o File size After adding 'const': text data bss dec hex filename 9327 5336 416 15079 3ae7 drivers/bus/arm-ccn.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 14:40:28 +0000