diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-14 10:29:47 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-14 10:29:47 -0700 |
| commit | 8403ce70be339d462892a2b935ae30ee52416f92 (patch) | |
| tree | 62bc21ac79fe5b6282615c8aa2cb90fec964eff4 | |
| parent | a3df5d5422b4edfcfe658d5057e7e059571e32ce (diff) | |
| parent | 78334c343bef528b911da83a6b041d15a1a72efb (diff) | |
| download | linux-8403ce70be339d462892a2b935ae30ee52416f92.tar.gz linux-8403ce70be339d462892a2b935ae30ee52416f92.tar.xz | |
Merge tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
76 files changed, 1045 insertions, 634 deletions
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt deleted file mode 100644 index e5eef59a93dc..000000000000 --- a/Documentation/devicetree/bindings/input/da9062-onkey.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Dialog DA9061/62/63 OnKey Module - -This module is part of the DA9061/DA9062/DA9063. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt -For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml - -This module provides the KEY_POWER event. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-onkey", "dlg,da9062-onkey" - "dlg,da9062-onkey" - "dlg,da9063-onkey" - -Optional properties: - -- dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press when triggered using a long press of the OnKey. - -Example: DA9063 - - pmic0: da9063@58 { - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9062 - - pmic0: da9062@58 { - onkey { - compatible = "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - onkey { - compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml new file mode 100644 index 000000000000..1480d95421e1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9061/62/63 OnKey Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062/DA9063. For more details about entire + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + This module provides the KEY_POWER event. + +properties: + compatible: + oneOf: + - enum: + - dlg,da9062-onkey + - dlg,da9063-onkey + - items: + - const: dlg,da9061-onkey + - const: dlg,da9062-onkey + + dlg,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. If this entry exists + the OnKey driver will remove support for the KEY_POWER key press + when triggered using a long press of the OnKey. + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml new file mode 100644 index 000000000000..4aa36903e755 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCD Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two + subdevices, a PWM chip and a Display Controller. + +properties: + compatible: + enum: + - atmel,at91sam9n12-hlcdc + - atmel,at91sam9x5-hlcdc + - atmel,sama5d2-hlcdc + - atmel,sama5d3-hlcdc + - atmel,sama5d4-hlcdc + - microchip,sam9x60-hlcdc + - microchip,sam9x75-xlcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: periph_clk + - const: sys_clk + - const: slow_clk + - const: lvds_pll_clk + minItems: 3 + + display-controller: + $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml + + pwm: + $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd_controller: lcd-controller@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 000000000000..0dc6a40b63f4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Microchip Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + oneOf: + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sam9x7-flexcom + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sama7g5-flexcom + - const: atmel,sama5d2-flexcom + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index af692e8833a5..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" - or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt deleted file mode 100644 index 7de696eefaed..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ /dev/null @@ -1,56 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver - -Required properties: - - compatible: value should be one of the following: - "atmel,at91sam9n12-hlcdc" - "atmel,at91sam9x5-hlcdc" - "atmel,sama5d2-hlcdc" - "atmel,sama5d3-hlcdc" - "atmel,sama5d4-hlcdc" - "microchip,sam9x60-hlcdc" - "microchip,sam9x75-xlcdc" - - reg: base address and size of the HLCDC device registers. - - clock-names: the name of the 3 clocks requested by the HLCDC device. - Should contain "periph_clk", "sys_clk" and "slow_clk". - - clocks: should contain the 3 clocks requested by the HLCDC device. - - interrupts: should contain the description of the HLCDC interrupt line - -The HLCDC IP exposes two subdevices: - - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../display/atmel/hlcdc-dc.txt - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt deleted file mode 100644 index e4eedd3bd233..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/da9062-onkey.txt - -- watchdog: See ../watchdog/da9062-wdt.txt - -- thermal : See ../thermal/da9062-thermal.txt - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index c5a7e10d7d80..51612dc22748 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,20 +42,28 @@ properties: "#interrupt-cells": const: 2 - dlg,use-sw-pm: - type: boolean - description: - Disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). + gpio-controller: true - watchdog: + "#gpio-cells": + const: 2 + + gpio: type: object - $ref: /schemas/watchdog/watchdog.yaml# - unevaluatedProperties: false + additionalProperties: false properties: compatible: - const: dlg,da9063-watchdog + const: dlg,da9062-gpio + + onkey: + $ref: /schemas/input/dlg,da9062-onkey.yaml + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false rtc: type: object @@ -56,37 +71,86 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc - onkey: - type: object - $ref: /schemas/input/input.yaml# - unevaluatedProperties: false - properties: - compatible: - const: dlg,da9063-onkey + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml - dlg,disable-key-power: - type: boolean - description: | - Disable power-down using a long key-press. - If this entry does not exist then by default the key-press triggered - power down is enabled and the OnKey will support both KEY_POWER and - KEY_SLEEP. + watchdog: + $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml - regulators: +patternProperties: + "^(.+-hog(-[0-9]+)?)$": type: object - additionalProperties: false - patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": - $ref: /schemas/regulator/regulator.yaml - unevaluatedProperties: false + + required: + - gpio-hog required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -99,10 +163,10 @@ examples: pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -143,4 +207,121 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index e1ca4f297c6d..aac8819bd00b 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -93,6 +93,11 @@ properties: '#size-cells': const: 0 + '#gpio-cells': + const: 2 + + gpio-controller: true + typec: $ref: /schemas/chrome/google,cros-ec-typec.yaml# @@ -275,6 +280,8 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; proximity { compatible = "google,cros-ec-mkbp-proximity"; diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index 044cd7542c2b..f438c2374966 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Specifies the name of the calibration and configuration file selected by the driver. If this property is omitted, the name is chosen based on the diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 798705ab6a46..b97d77015335 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,msm8976-tcsr - qcom,msm8998-tcsr + - qcom,qcm2290-tcsr - qcom,qcs404-tcsr - qcom,sc7180-tcsr - qcom,sc7280-tcsr @@ -28,6 +29,7 @@ properties: - qcom,sdx55-tcsr - qcom,sdx65-tcsr - qcom,sm4450-tcsr + - qcom,sm6115-tcsr - qcom,sm8150-tcsr - qcom,sm8250-tcsr - qcom,sm8350-tcsr diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 084b5c2a2a3c..9d55bee155ce 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -72,7 +72,10 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am62-usb-phy-ctrl - ti,am654-dss-oldi-io-ctrl + - ti,am654-serdes-ctrl + - ti,j784s4-pcie-ctrl - const: syscon diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index c04d57ba22b4..52ed228fb1e7 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -34,6 +34,8 @@ properties: interrupt-controller: true + system-power-controller: true + "#interrupt-cells": const: 1 diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt deleted file mode 100644 index e241bb5a5584..000000000000 --- a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Dialog DA9062/61 TJUNC Thermal Module - -This module is part of the DA9061/DA9062. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - -Junction temperature thermal module uses an interrupt signal to identify -high THERMAL_TRIP_HOT temperatures for the PMIC device. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-thermal", "dlg,da9062-thermal" - "dlg,da9062-thermal" - -Optional properties: - -- polling-delay-passive : Specify the polling period, measured in - milliseconds, between thermal zone device update checks. - -Example: DA9062 - - pmic0: da9062@58 { - thermal { - compatible = "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - thermal { - compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml new file mode 100644 index 000000000000..e8b2cac41084 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9062/61 TJUNC Thermal Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062. For more details about entire + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + Junction temperature thermal module uses an interrupt signal to identify + high THERMAL_TRIP_HOT temperatures for the PMIC device. + +properties: + compatible: + oneOf: + - const: dlg,da9062-thermal + - items: + - const: dlg,da9061-thermal + - const: dlg,da9062-thermal + + polling-delay-passive: + description: + Specify the polling period, measured in milliseconds, between + thermal zone device update checks. + +required: + - compatible + +additionalProperties: false diff --git a/MAINTAINERS b/MAINTAINERS index 27c22f4f8daf..ba68e3bf0a0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5012,6 +5012,12 @@ R: Sami Kyöstilä <skyostil@chromium.org> S: Maintained F: drivers/platform/chrome/cros_hps_i2c.c +CHROMEOS EC WATCHDOG +M: Lukasz Majczak <lma@chromium.org> +L: chrome-platform@lists.linux.dev +S: Maintained +F: drivers/watchdog/cros_ec_wdt.c + CHRONTEL CH7322 CEC DRIVER M: Joe Tessler <jrt@google.com> L: linux-media@vger.kernel.org @@ -6181,16 +6187,16 @@ DIALOG SEMICONDUCTOR DRIVERS M: Support Opensource <support.opensource@diasemi.com> S: Supported W: http://www.dialog-semiconductor.com/products -F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/input/dlg,da72??.txt +F: Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/mfd/dlg,da90*.yaml F: Documentation/devicetree/bindings/regulator/da92*.txt F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml F: Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml F: Documentation/devicetree/bindings/sound/da[79]*.txt -F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt -F: Documentation/devicetree/bindings/watchdog/dlg,da90??-watchdog.yaml +F: Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml +F: Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml F: Documentation/hwmon/da90??.rst F: drivers/gpio/gpio-da90??.c F: drivers/hwmon/da90??-hwmon.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e7a6e45b9fac..4b023ee229cf 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1773,6 +1773,7 @@ config TWL4030_CORE bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y select IRQ_DOMAIN + select MFD_CORE select REGMAP_I2C help Say yes here if you have TWL4030 / TWL6030 family chip on your board. diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c index 6d49d7fb5f14..8f47c392cbd1 100644 --- a/drivers/mfd/ac100.c +++ b/drivers/mfd/ac100.c @@ -72,7 +72,7 @@ static const struct regmap_config ac100_regmap_config = { .wr_table = &ac100_writeable_table, .volatile_table = &ac100_volatile_table, .max_register = AC100_RTC_GP(15), - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static struct mfd_cell ac100_cells[] = { diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c index 0e52bd2ebd74..fb5f988e61f3 100644 --- a/drivers/mfd/altera-sysmgr.c +++ b/drivers/mfd/altera-sysmgr.c @@ -109,7 +109,9 @@ struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, dev = driver_find_device_by_of_node(&altr_sysmgr_driver.driver, (void *)sysmgr_np); - of_node_put(sysmgr_np); + if (property) + of_node_put(sysmgr_np); + if (!dev) return ERR_PTR(-EPROBE_DEFER); diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c index c7e85ff38013..9741977031df 100644 --- a/drivers/mfd/as3711.c +++ b/drivers/mfd/as3711.c @@ -106,7 +106,7 @@ static const struct regmap_config as3711_regmap_config = { .precious_reg = as3711_precious_reg, .max_register = AS3711_MAX_REG, .num_reg_defaults_raw = AS3711_NUM_REGS, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; #ifdef CONFIG_OF diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c index a2bf68afc131..bec047bdd088 100644 --- a/drivers/mfd/as3722.c +++ b/drivers/mfd/as3722.c @@ -299,7 +299,7 @@ static const struct regmap_config as3722_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = AS3722_MAX_REGISTER, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .rd_table = &as3722_readable_table, .wr_table = &as3722_writable_table, .volatile_table = &as3722_volatile_table, diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index deaa969bab4e..d8daa593ebd5 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -352,7 +352,7 @@ static const struct regmap_config axp192_regmap_config = { .wr_table = &axp192_writeable_table, .volatile_table = &axp192_volatile_table, .max_register = AXP20X_CC_CTRL, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct regmap_config axp20x_regmap_config = { @@ -388,7 +388,7 @@ static const struct regmap_config axp313a_regmap_config = { .wr_table = &axp313a_writeable_table, .volatile_table = &axp313a_volatile_table, .max_register = AXP313A_IRQ_STATE, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct regmap_config axp806_regmap_config = { diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c index 92eede9a5e61..8b56786d85d0 100644 --- a/drivers/mfd/bcm590xx.c +++ b/drivers/mfd/bcm590xx.c @@ -27,14 +27,14 @@ static const struct regmap_config bcm590xx_regmap_config_pri = { .reg_bits = 8, .val_bits = 8, .max_register = BCM590XX_MAX_REGISTER_PRI, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct regmap_config bcm590xx_regmap_config_sec = { .reg_bits = 8, .val_bits = 8, .max_register = BCM590XX_MAX_REGISTER_SEC, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri) diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c index 819d09e4d100..0a955178d469 100644 --- a/drivers/mfd/bd9571mwv.c +++ b/drivers/mfd/bd9571mwv.c @@ -67,7 +67,7 @@ static const struct regmap_access_table bd9571mwv_volatile_table = { static const struct regmap_config bd9571mwv_regmap_config = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .rd_table = &bd9571mwv_readable_table, .wr_table = &bd9571mwv_writable_table, .volatile_table = &bd9571mwv_volatile_table, @@ -152,7 +152,7 @@ static const struct regmap_access_table bd9574mwf_volatile_table = { static const struct regmap_config bd9574mwf_regmap_config = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .rd_table = &bd9574mwf_readable_table, .wr_table = &bd9574mwf_writable_table, .volatile_table = &bd9574mwf_volatile_table, diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index 603b1cd52785..a52d59cc2b1e 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -74,6 +74,10 @@ static const struct mfd_cell cros_ec_cec_cells[] = { { .name = "cros-ec-cec", }, }; +static const struct mfd_cell cros_ec_gpio_cells[] = { + { .name = "cros-ec-gpio", }, +}; + static const struct mfd_cell cros_ec_rtc_cells[] = { { .name = "cros-ec-rtc", }, }; @@ -91,6 +95,10 @@ static const struct mfd_cell cros_usbpd_notify_cells[] = { { .name = "cros-usbpd-notify", }, }; +static const struct mfd_cell cros_ec_wdt_cells[] = { + { .name = "cros-ec-wdt", } +}; + static const struct cros_feature_to_cells cros_subdevices[] = { { .id = EC_FEATURE_CEC, @@ -98,6 +106,11 @@ static const struct cros_feature_to_cells cros_subdevices[] = { .num_cells = ARRAY_SIZE(cros_ec_cec_cells), }, { + .id = EC_FEATURE_GPIO, + .mfd_cells = cros_ec_gpio_cells, + .num_cells = ARRAY_SIZE(cros_ec_gpio_cells), + }, + { .id = EC_FEATURE_RTC, .mfd_cells = cros_ec_rtc_cells, .num_cells = ARRAY_SIZE(cros_ec_rtc_cells), @@ -107,6 +120,11 @@ static const struct cros_feature_to_cells cros_subdevices[] = { .mfd_cells = cros_usbpd_charger_cells, .num_cells = ARRAY_SIZE(cros_usbpd_charger_cells), }, + { + .id = EC_FEATURE_HANG_DETECT, + .mfd_cells = cros_ec_wdt_cells, + .num_cells = ARRAY_SIZE(cros_ec_wdt_cells), + }, }; static const struct mfd_cell cros_ec_platform_cells[] = { diff --git a/drivers/mfd/cs42l43-i2c.c b/drivers/mfd/cs42l43-i2c.c index 4922211680c9..c9e4ea76149a 100644 --- a/drivers/mfd/cs42l43-i2c.c +++ b/drivers/mfd/cs42l43-i2c.c @@ -6,11 +6,15 @@ * Cirrus Logic International Semiconductor Ltd. */ +#include <linux/array_size.h> #include <linux/err.h> -#include <linux/errno.h> #include <linux/i2c.h> +#include <linux/mfd/cs42l43.h> #include <linux/mfd/cs42l43-regs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/pm.h> +#include <linux/regmap.h> #include "cs42l43.h" @@ -34,7 +38,6 @@ static const struct regmap_config cs42l43_i2c_regmap = { static int cs42l43_i2c_probe(struct i2c_client *i2c) { struct cs42l43 *cs42l43; - int ret; cs42l43 = devm_kzalloc(&i2c->dev, sizeof(*cs42l43), GFP_KERNEL); if (!cs42l43) @@ -46,11 +49,9 @@ static int cs42l43_i2c_probe(struct i2c_client *i2c) cs42l43->attached = true; cs42l43->regmap = devm_regmap_init_i2c(i2c, &cs42l43_i2c_regmap); - if (IS_ERR(cs42l43->regmap)) { - ret = PTR_ERR(cs42l43->regmap); - dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret); - return ret; - } + if (IS_ERR(cs42l43->regmap)) + return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->regmap), + "Failed to allocate regmap\n"); return cs42l43_dev_probe(cs42l43); } diff --git a/drivers/mfd/cs42l43-sdw.c b/drivers/mfd/cs42l43-sdw.c index 1d85bbf8cdd5..65f7b1d78248 100644 --- a/drivers/mfd/cs42l43-sdw.c +++ b/drivers/mfd/cs42l43-sdw.c @@ -6,11 +6,15 @@ * Cirrus Logic International Semiconductor Ltd. */ +#include <linux/array_size.h> #include <linux/device.h> #include <linux/err.h> -#include <linux/errno.h> +#include <linux/mfd/cs42l43.h> #include <linux/mfd/cs42l43-regs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/pm.h> +#include <linux/regmap.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_registers.h> #include <linux/soundwire/sdw_type.h> @@ -167,7 +171,6 @@ static int cs42l43_sdw_probe(struct sdw_slave *sdw, const struct sdw_device_id * { struct cs42l43 *cs42l43; struct device *dev = &sdw->dev; - int ret; cs42l43 = devm_kzalloc(dev, sizeof(*cs42l43), GFP_KERNEL); if (!cs42l43) @@ -177,11 +180,9 @@ static int cs42l43_sdw_probe(struct sdw_slave *sdw, const struct sdw_device_id * cs42l43->sdw = sdw; cs42l43->regmap = devm_regmap_init_sdw(sdw, &cs42l43_sdw_regmap); - if (IS_ERR(cs42l43->regmap)) { - ret = PTR_ERR(cs42l43->regmap); - dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret); - return ret; - } + if (IS_ERR(cs42l43->regmap)) + return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->regmap), + "Failed to allocate regmap\n"); return cs42l43_dev_probe(cs42l43); } diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c index 7b6d07cbe6fc..a0fb2dc6c3b2 100644 --- a/drivers/mfd/cs42l43.c +++ b/drivers/mfd/cs42l43.c @@ -6,51 +6,57 @@ * Cirrus Logic International Semiconductor Ltd. */ +#include <linux/array_size.h> #include <linux/bitops.h> #include <linux/build_bug.h> #include <linux/delay.h> +#include <linux/device.h> #include <linux/err.h> -#include <linux/errno.h> #include <linux/firmware.h> +#include <linux/gpio/consumer.h> #include <linux/jiffies.h> #include <linux/mfd/core.h> +#include <linux/mfd/cs42l43.h> #include <linux/mfd/cs42l43-regs.h> #include <linux/module.h> +#include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/regmap.h> #include <linux/soundwire/sdw.h> +#include <linux/types.h> #include "cs42l43.h" -#define CS42L43_RESET_DELAY 20 +#define CS42L43_RESET_DELAY_MS 20 -#define CS42L43_SDW_ATTACH_TIMEOUT 500 -#define CS42L43_SDW_DETACH_TIMEOUT 100 +#define CS42L43_SDW_ATTACH_TIMEOUT_MS 500 +#define CS42L43_SDW_DETACH_TIMEOUT_MS 100 #define CS42L43_MCU_BOOT_STAGE1 1 #define CS42L43_MCU_BOOT_STAGE2 2 #define CS42L43_MCU_BOOT_STAGE3 3 #define CS42L43_MCU_BOOT_STAGE4 4 -#define CS42L43_MCU_POLL 5000 -#define CS42L43_MCU_CMD_TIMEOUT 20000 +#define CS42L43_MCU_POLL_US 5000 +#define CS42L43_MCU_CMD_TIMEOUT_US 20000 #define CS42L43_MCU_UPDATE_FORMAT 3 #define CS42L43_MCU_UPDATE_OFFSET 0x100000 -#define CS42L43_MCU_UPDATE_TIMEOUT 500000 +#define CS42L43_MCU_UPDATE_TIMEOUT_US 500000 #define CS42L43_MCU_UPDATE_RETRIES 5 #define CS42L43_MCU_SUPPORTED_REV 0x2105 #define CS42L43_MCU_SHADOW_REGS_REQUIRED_REV 0x2200 #define CS42L43_MCU_SUPPORTED_BIOS_REV 0x0001 -#define CS42L43_VDDP_DELAY 50 -#define CS42L43_VDDD_DELAY 1000 +#define CS42L43_VDDP_DELAY_US 50 +#define CS42L43_VDDD_DELAY_US 1000 -#define CS42L43_AUTOSUSPEND_TIME 250 +#define CS42L43_AUTOSUSPEND_TIME_MS 250 struct cs42l43_patch_header { __le16 version; __le16 size; - u8 reserved; - u8 secure; + __u8 reserved; + __u8 secure; __le16 bss_size; __le32 apply_addr; __le32 checksum; @@ -84,7 +90,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_DRV_CTRL_5, 0x136C00C0 }, { CS42L43_GPIO_CTRL1, 0x00000707 }, { CS42L43_GPIO_CTRL2, 0x00000000 }, - { CS42L43_GPIO_FN_SEL, 0x00000000 }, + { CS42L43_GPIO_FN_SEL, 0x00000004 }, { CS42L43_MCLK_SRC_SEL, 0x00000000 }, { CS42L43_SAMPLE_RATE1, 0x00000003 }, { CS42L43_SAMPLE_RATE2, 0x00000003 }, @@ -131,38 +137,38 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_ASP_TX_CH4_CTRL, 0x00170091 }, { CS42L43_ASP_TX_CH5_CTRL, 0x001700C1 }, { CS42L43_ASP_TX_CH6_CTRL, 0x001700F1 }, - { CS42L43_ASPTX1_INPUT, 0x00800000 }, - { CS42L43_ASPTX2_INPUT, 0x00800000 }, - { CS42L43_ASPTX3_INPUT, 0x00800000 }, - { CS42L43_ASPTX4_INPUT, 0x00800000 }, - { CS42L43_ASPTX5_INPUT, 0x00800000 }, - { CS42L43_ASPTX6_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP1_CH1_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP1_CH2_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP1_CH3_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP1_CH4_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP2_CH1_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP2_CH2_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP3_CH1_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP3_CH2_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP4_CH1_INPUT, 0x00800000 }, - { CS42L43_SWIRE_DP4_CH2_INPUT, 0x00800000 }, - { CS42L43_ASRC_INT1_INPUT1, 0x00800000 }, - { CS42L43_ASRC_INT2_INPUT1, 0x00800000 }, - { CS42L43_ASRC_INT3_INPUT1, 0x00800000 }, - { CS42L43_ASRC_INT4_INPUT1, 0x00800000 }, - { CS42L43_ASRC_DEC1_INPUT1, 0x00800000 }, - { CS42L43_ASRC_DEC2_INPUT1, 0x00800000 }, - { CS42L43_ASRC_DEC3_INPUT1, 0x00800000 }, - { CS42L43_ASRC_DEC4_INPUT1, 0x00800000 }, - { CS42L43_ISRC1INT1_INPUT1, 0x00800000 }, - { CS42L43_ISRC1INT2_INPUT1, 0x00800000 }, - { CS42L43_ISRC1DEC1_INPUT1, 0x00800000 }, - { CS42L43_ISRC1DEC2_INPUT1, 0x00800000 }, - { CS42L43_ISRC2INT1_INPUT1, 0x00800000 }, - { CS42L43_ISRC2INT2_INPUT1, 0x00800000 }, - { CS42L43_ISRC2DEC1_INPUT1, 0x00800000 }, - { CS42L43_ISRC2DEC2_INPUT1, 0x00800000 }, + { CS42L43_ASPTX1_INPUT, 0x00000000 }, + { CS42L43_ASPTX2_INPUT, 0x00000000 }, + { CS42L43_ASPTX3_INPUT, 0x00000000 }, + { CS42L43_ASPTX4_INPUT, 0x00000000 }, + { CS42L43_ASPTX5_INPUT, 0x00000000 }, + { CS42L43_ASPTX6_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP1_CH1_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP1_CH2_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP1_CH3_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP1_CH4_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP2_CH1_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP2_CH2_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP3_CH1_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP3_CH2_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP4_CH1_INPUT, 0x00000000 }, + { CS42L43_SWIRE_DP4_CH2_INPUT, 0x00000000 }, + { CS42L43_ASRC_INT1_INPUT1, 0x00000000 }, + { CS42L43_ASRC_INT2_INPUT1, 0x00000000 }, + { CS42L43_ASRC_INT3_INPUT1, 0x00000000 }, + { CS42L43_ASRC_INT4_INPUT1, 0x00000000 }, + { CS42L43_ASRC_DEC1_INPUT1, 0x00000000 }, + { CS42L43_ASRC_DEC2_INPUT1, 0x00000000 }, + { CS42L43_ASRC_DEC3_INPUT1, 0x00000000 }, + { CS42L43_ASRC_DEC4_INPUT1, 0x00000000 }, + { CS42L43_ISRC1INT1_INPUT1, 0x00000000 }, + { CS42L43_ISRC1INT2_INPUT1, 0x00000000 }, + { CS42L43_ISRC1DEC1_INPUT1, 0x00000000 }, + { CS42L43_ISRC1DEC2_INPUT1, 0x00000000 }, + { CS42L43_ISRC2INT1_INPUT1, 0x00000000 }, + { CS42L43_ISRC2INT2_INPUT1, 0x00000000 }, + { CS42L43_ISRC2DEC1_INPUT1, 0x00000000 }, + { CS42L43_ISRC2DEC2_INPUT1, 0x00000000 }, { CS42L43_EQ1MIX_INPUT1, 0x00800000 }, { CS42L43_EQ1MIX_INPUT2, 0x00800000 }, { CS42L43_EQ1MIX_INPUT3, 0x00800000 }, @@ -171,8 +177,8 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_EQ2MIX_INPUT2, 0x00800000 }, { CS42L43_EQ2MIX_INPUT3, 0x00800000 }, { CS42L43_EQ2MIX_INPUT4, 0x00800000 }, - { CS42L43_SPDIF1_INPUT1, 0x00800000 }, - { CS42L43_SPDIF2_INPUT1, 0x00800000 }, + { CS42L43_SPDIF1_INPUT1, 0x00000000 }, + { CS42L43_SPDIF2_INPUT1, 0x00000000 }, { CS42L43_AMP1MIX_INPUT1, 0x00800000 }, { CS42L43_AMP1MIX_INPUT2, 0x00800000 }, { CS42L43_AMP1MIX_INPUT3, 0x00800000 }, @@ -217,7 +223,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_CTRL_REG, 0x00000006 }, { CS42L43_FDIV_FRAC, 0x40000000 }, { CS42L43_CAL_RATIO, 0x00000080 }, - { CS42L43_SPI_CLK_CONFIG1, 0x00000000 }, + { CS42L43_SPI_CLK_CONFIG1, 0x00000001 }, { CS42L43_SPI_CONFIG1, 0x00000000 }, { CS42L43_SPI_CONFIG2, 0x00000000 }, { CS42L43_SPI_CONFIG3, 0x00000001 }, @@ -532,10 +538,10 @@ static int cs42l43_soft_reset(struct cs42l43 *cs42l43) regcache_cache_only(cs42l43->regmap, true); regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset)); - msleep(CS42L43_RESET_DELAY); + msleep(CS42L43_RESET_DELAY_MS); if (cs42l43->sdw) { - unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT); + unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT_MS); unsigned long time; time = wait_for_completion_timeout(&cs42l43->device_detach, timeout); @@ -555,7 +561,7 @@ static int cs42l43_soft_reset(struct cs42l43 *cs42l43) static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43) { if (!cs42l43->attached) { - unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT); + unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT_MS); unsigned long time; time = wait_for_completion_timeout(&cs42l43->device_attach, timeout); @@ -597,7 +603,7 @@ static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow) ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS, val, (val == CS42L43_MCU_BOOT_STAGE3), - CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT); + CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US); if (ret) { dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val); return ret; @@ -646,7 +652,7 @@ static int cs42l43_mcu_disable(struct cs42l43 *cs42l43) ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val, (val & CS42L43_CONTROL_APPLIED_INT_MASK), - CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT); + CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US); if (ret) { dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val); return ret; @@ -690,7 +696,7 @@ static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *con ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val, (val & CS42L43_PATCH_APPLIED_INT_MASK), - CS42L43_MCU_POLL, CS42L43_MCU_UPDATE_TIMEOUT); + CS42L43_MCU_POLL_US, CS42L43_MCU_UPDATE_TIMEOUT_US); if (ret) { dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val); cs42l43->firmware_error = ret; @@ -951,7 +957,7 @@ static int cs42l43_power_up(struct cs42l43 *cs42l43) } /* vdd-p must be on for 50uS before any other supply */ - usleep_range(CS42L43_VDDP_DELAY, 2 * CS42L43_VDDP_DELAY); + usleep_range(CS42L43_VDDP_DELAY_US, 2 * CS42L43_VDDP_DELAY_US); gpiod_set_value_cansleep(cs42l43->reset, 1); @@ -967,7 +973,7 @@ static int cs42l43_power_up(struct cs42l43 *cs42l43) goto err_core_supplies; } - usleep_range(CS42L43_VDDD_DELAY, 2 * CS42L43_VDDD_DELAY); + usleep_range(CS42L43_VDDD_DELAY_US, 2 * CS42L43_VDDD_DELAY_US); return 0; @@ -1051,7 +1057,7 @@ int cs42l43_dev_probe(struct cs42l43 *cs42l43) if (ret) return ret; - pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME); + pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME_MS); pm_runtime_use_autosuspend(cs42l43->dev); pm_runtime_set_active(cs42l43->dev); /* @@ -1059,7 +1065,9 @@ int cs42l43_dev_probe(struct cs42l43 *cs42l43) * the boot work runs. */ pm_runtime_get_noresume(cs42l43->dev); - devm_pm_runtime_enable(cs42l43->dev); + ret = devm_pm_runtime_enable(cs42l43->dev); + if (ret) + return ret; queue_work(system_long_wq, &cs42l43->boot_work); diff --git a/drivers/mfd/cs42l43.h b/drivers/mfd/cs42l43.h index eb4caf393833..8d1b1b0f5a47 100644 --- a/drivers/mfd/cs42l43.h +++ b/drivers/mfd/cs42l43.h @@ -6,15 +6,17 @@ * Cirrus Logic International Semiconductor Ltd. */ -#include <linux/mfd/cs42l43.h> -#include <linux/pm.h> -#include <linux/regmap.h> - #ifndef CS42L43_CORE_INT_H #define CS42L43_CORE_INT_H #define CS42L43_N_DEFAULTS 176 +struct dev_pm_ops; +struct device; +struct reg_default; + +struct cs42l43; + extern const struct dev_pm_ops cs42l43_pm_ops; extern const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS]; diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 150448cd2eb0..dc85801b9fa0 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -533,7 +533,7 @@ const struct regmap_config da9052_regmap_config = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .max_register = DA9052_PAGE1_CON_REG, .readable_reg = da9052_reg_readable, diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c index 768302e05baa..1f727ef60d63 100644 --- a/drivers/mfd/da9055-core.c +++ b/drivers/mfd/da9055-core.c @@ -245,7 +245,7 @@ const struct regmap_config da9055_regmap_config = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .max_register = DA9055_MAX_REGISTER_CNT, .readable_reg = da9055_register_readable, diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c index 73a22107900c..dbbc4779170a 100644 --- a/drivers/mfd/da9062-core.c +++ b/drivers/mfd/da9062-core.c @@ -476,7 +476,7 @@ static struct regmap_config da9061_regmap_config = { .ranges = da9061_range_cfg, .num_ranges = ARRAY_SIZE(da9061_range_cfg), .max_register = DA9062AA_CONFIG_ID, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .rd_table = &da9061_aa_readable_table, .wr_table = &da9061_aa_writeable_table, .volatile_table = &da9061_aa_volatile_table, @@ -582,7 +582,7 @@ static struct regmap_config da9062_regmap_config = { .ranges = da9062_range_cfg, .num_ranges = ARRAY_SIZE(da9062_range_cfg), .max_register = DA9062AA_CONFIG_ID, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .rd_table = &da9062_aa_readable_table, .wr_table = &da9062_aa_writeable_table, .volatile_table = &da9062_aa_volatile_table, diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index d715cf9a9e68..c6235cd0dbdc 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -342,7 +342,7 @@ static struct regmap_config da9063_regmap_config = { .num_ranges = ARRAY_SIZE(da9063_range_cfg), .max_register = DA9063_REG_CONFIG_ID, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct of_device_id da9063_dt_ids[] = { diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c index 94d621e20635..5c59cc869fb3 100644 --- a/drivers/mfd/da9150-core.c +++ b/drivers/mfd/da9150-core.c @@ -169,7 +169,7 @@ static const struct regmap_config da9150_regmap_config = { .num_ranges = ARRAY_SIZE(da9150_range_cfg), .max_register = DA9150_TBAT_RES_B, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .volatile_reg = da9150_volatile_reg, }; diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 4621d3950b8f..8c00e0c695c5 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -23,12 +23,22 @@ #include "intel-lpss.h" -/* Some DSDTs have an unused GEXP ACPI device conflicting with I2C4 resources */ -static const struct pci_device_id ignore_resource_conflicts_ids[] = { - /* Microsoft Surface Go (version 1) I2C4 */ - { PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x9d64, 0x152d, 0x1182), }, - /* Microsoft Surface Go 2 I2C4 */ - { PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x9d64, 0x152d, 0x1237), }, +static const struct pci_device_id quirk_ids[] = { + { + /* Microsoft Surface Go (version 1) I2C4 */ + PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x9d64, 0x152d, 0x1182), + .driver_data = QUIRK_IGNORE_RESOURCE_CONFLICTS, + }, + { + /* Microsoft Surface Go 2 I2C4 */ + PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x9d64, 0x152d, 0x1237), + .driver_data = QUIRK_IGNORE_RESOURCE_CONFLICTS, + }, + { + /* Dell XPS 9530 (2023) */ + PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x51fb, 0x1028, 0x0beb), + .driver_data = QUIRK_CLOCK_DIVIDER_UNITY, + }, { } }; @@ -36,6 +46,7 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { const struct intel_lpss_platform_info *data = (void *)id->driver_data; + const struct pci_device_id *quirk_pci_info; struct intel_lpss_platform_info *info; int ret; @@ -55,8 +66,9 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev, info->mem = pci_resource_n(pdev, 0); info->irq = pci_irq_vector(pdev, 0); - if (pci_match_id(ignore_resource_conflicts_ids, pdev)) - info->ignore_resource_conflicts = true; + quirk_pci_info = pci_match_id(quirk_ids, pdev); + if (quirk_pci_info) + info->quirks = quirk_pci_info->driver_data; pdev->d3cold_delay = 0; diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index eff423f7dd28..2a9018112dfc 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -300,6 +300,7 @@ static int intel_lpss_register_clock_divider(struct intel_lpss *lpss, { char name[32]; struct clk *tmp = *clk; + int ret; snprintf(name, sizeof(name), "%s-enable", devname); tmp = clk_register_gate(NULL, name, __clk_get_name(tmp), 0, @@ -316,6 +317,12 @@ static int intel_lpss_register_clock_divider(struct intel_lpss *lpss, return PTR_ERR(tmp); *clk = tmp; + if (lpss->info->quirks & QUIRK_CLOCK_DIVIDER_UNITY) { + ret = clk_set_rate(tmp, lpss->info->clk_rate); + if (ret) + return ret; + } + snprintf(name, sizeof(name), "%s-update", devname); tmp = clk_register_gate(NULL, name, __clk_get_name(tmp), CLK_SET_RATE_PARENT, lpss->priv, 31, 0, NULL); @@ -412,7 +419,7 @@ int intel_lpss_probe(struct device *dev, return ret; lpss->cell->swnode = info->swnode; - lpss->cell->ignore_resource_conflicts = info->ignore_resource_conflicts; + lpss->cell->ignore_resource_conflicts = info->quirks & QUIRK_IGNORE_RESOURCE_CONFLICTS; intel_lpss_init_dev(lpss); diff --git a/drivers/mfd/intel-lpss.h b/drivers/mfd/intel-lpss.h index c1d72b117ed5..6f8f668f4c6f 100644 --- a/drivers/mfd/intel-lpss.h +++ b/drivers/mfd/intel-lpss.h @@ -11,16 +11,28 @@ #ifndef __MFD_INTEL_LPSS_H #define __MFD_INTEL_LPSS_H +#include <linux/bits.h> #include <linux/pm.h> +/* + * Some DSDTs have an unused GEXP ACPI device conflicting with I2C4 resources. + * Set to ignore resource conflicts with ACPI declared SystemMemory regions. + */ +#define QUIRK_IGNORE_RESOURCE_CONFLICTS BIT(0) +/* + * Some devices have misconfigured clock divider due to a firmware bug. + * Set this to force the clock divider to 1:1 ratio. + */ +#define QUIRK_CLOCK_DIVIDER_UNITY BIT(1) + struct device; struct resource; struct software_node; struct intel_lpss_platform_info { struct resource *mem; - bool ignore_resource_conflicts; int irq; + unsigned int quirks; unsigned long clk_rate; const char *clk_con_id; const struct software_node *swnode; diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index 67af36a38913..5557f023a173 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -428,50 +428,13 @@ static int kempld_detect_device(struct kempld_device_data *pld) #ifdef CONFIG_ACPI static int kempld_get_acpi_data(struct platform_device *pdev) { - struct list_head resource_list; - struct resource *resources; - struct resource_entry *rentry; struct device *dev = &pdev->dev; - struct acpi_device *acpi_dev = ACPI_COMPANION(dev); const struct kempld_platform_data *pdata; int ret; - int count; pdata = acpi_device_get_match_data(dev); ret = platform_device_add_data(pdev, pdata, sizeof(struct kempld_platform_data)); - if (ret) - return ret; - - INIT_LIST_HEAD(&resource_list); - ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL); - if (ret < 0) - goto out; - - count = ret; - - if (count == 0) { - ret = platform_device_add_resources(pdev, pdata->ioresource, 1); - goto out; - } - - resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources), - GFP_KERNEL); - if (!resources) { - ret = -ENOMEM; - goto out; - } - - count = 0; - list_for_each_entry(rentry, &resource_list, node) { - memcpy(&resources[count], rentry->res, - sizeof(*resources)); - count++; - } - ret = platform_device_add_resources(pdev, resources, count); - -out: - acpi_dev_free_resource_list(&resource_list); return ret; } diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c index 61396d824f16..ba981a788692 100644 --- a/drivers/mfd/khadas-mcu.c +++ b/drivers/mfd/khadas-mcu.c @@ -72,7 +72,7 @@ static const struct regmap_config khadas_mcu_regmap_config = { .max_register = KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG, .volatile_reg = khadas_mcu_reg_volatile, .writeable_reg = khadas_mcu_reg_writeable, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static struct mfd_cell khadas_mcu_fan_cells[] = { diff --git a/drivers/mfd/lochnagar-i2c.c b/drivers/mfd/lochnagar-i2c.c index 0b76fcccd0bd..6c930c57f2e2 100644 --- a/drivers/mfd/lochnagar-i2c.c +++ b/drivers/mfd/lochnagar-i2c.c @@ -70,7 +70,7 @@ static const struct regmap_config lochnagar1_i2c_regmap = { .use_single_read = true, .use_single_write = true, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct reg_sequence lochnagar1_patch[] = { @@ -163,7 +163,7 @@ static const struct regmap_config lochnagar2_i2c_regmap = { .readable_reg = lochnagar2_readable_register, .volatile_reg = lochnagar2_volatile_register, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct reg_sequence lochnagar2_patch[] = { diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 73a0e7f9bd31..f14901660147 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -38,6 +38,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/align.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> @@ -1321,7 +1322,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev) case INTEL_SPI_BYT: pci_read_config_dword(dev, SPIBASE_BYT, &spi_base); if (spi_base & SPIBASE_BYT_EN) { - res->start = spi_base & ~(SPIBASE_BYT_SZ - 1); + res->start = ALIGN_DOWN(spi_base, SPIBASE_BYT_SZ); res->end = res->start + SPIBASE_BYT_SZ - 1; info->set_writeable = lpc_ich_byt_set_writeable; diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 1000572761a8..920797b806ce 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -7,6 +7,7 @@ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> */ +#include <linux/bitfield.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -174,28 +175,27 @@ int mc13xxx_irq_free(struct mc13xxx *mc13xxx, int irq, void *dev) } EXPORT_SYMBOL(mc13xxx_irq_free); -#define maskval(reg, mask) (((reg) & (mask)) >> __ffs(mask)) static void mc13xxx_print_revision(struct mc13xxx *mc13xxx, u32 revision) { dev_info(mc13xxx->dev, "%s: rev: %d.%d, " "fin: %d, fab: %d, icid: %d/%d\n", mc13xxx->variant->name, - maskval(revision, MC13XXX_REVISION_REVFULL), - maskval(revision, MC13XXX_REVISION_REVMETAL), - maskval(revision, MC13XXX_REVISION_FIN), - maskval(revision, MC13XXX_REVISION_FAB), - maskval(revision, MC13XXX_REVISION_ICID), - maskval(revision, MC13XXX_REVISION_ICIDCODE)); + FIELD_GET(MC13XXX_REVISION_REVFULL, revision), + FIELD_GET(MC13XXX_REVISION_REVMETAL, revision), + FIELD_GET(MC13XXX_REVISION_FIN, revision), + FIELD_GET(MC13XXX_REVISION_FAB, revision), + FIELD_GET(MC13XXX_REVISION_ICID, revision), + FIELD_GET(MC13XXX_REVISION_ICIDCODE, revision)); } static void mc34708_print_revision(struct mc13xxx *mc13xxx, u32 revision) { dev_info(mc13xxx->dev, "%s: rev %d.%d, fin: %d, fab: %d\n", mc13xxx->variant->name, - maskval(revision, MC34708_REVISION_REVFULL), - maskval(revision, MC34708_REVISION_REVMETAL), - maskval(revision, MC34708_REVISION_FIN), - maskval(revision, MC34708_REVISION_FAB)); + FIELD_GET(MC34708_REVISION_REVFULL, revision), + FIELD_GET(MC34708_REVISION_REVMETAL, revision), + FIELD_GET(MC34708_REVISION_FIN, revision), + FIELD_GET(MC34708_REVISION_FAB, revision)); } /* These are only exported for mc13xxx-i2c and mc13xxx-spi */ diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 2fa592c37c6f..16ca23311cab 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -41,7 +41,7 @@ static void mcp_bus_remove(struct device *dev) drv->remove(mcp); } -static struct bus_type mcp_bus_type = { +static const struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, .probe = mcp_bus_probe, diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 2b85509a90fc..6ad5c93027af 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -29,7 +29,7 @@ struct mfd_of_node_entry { struct device_node *np; }; -static struct device_type mfd_dev_type = { +static const struct device_type mfd_dev_type = { .name = "mfd_device", }; diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 4449dde05021..4fd4a2da5ad7 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -142,6 +142,9 @@ static const struct mfd_cell mt6357_devs[] = { .resources = mt6357_rtc_resources, .of_compatible = "mediatek,mt6357-rtc", }, { + .name = "mt6357-sound", + .of_compatible = "mediatek,mt6357-sound" + }, { .name = "mtk-pmic-keys", .num_resources = ARRAY_SIZE(mt6357_keys_resources), .resources = mt6357_keys_resources, diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index ebc62033db16..949feb03d4f8 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -699,7 +699,7 @@ static int usbhs_omap_probe(struct platform_device *pdev) } for (i = 0; i < omap->nports; i++) { - char clkname[30]; + char clkname[40]; /* clock names are indexed from 1*/ snprintf(clkname, sizeof(clkname), diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c index 6ff84b2600c5..ea5fbcbbe4a5 100644 --- a/drivers/mfd/rave-sp.c +++ b/drivers/mfd/rave-sp.c @@ -358,7 +358,7 @@ int rave_sp_exec(struct rave_sp *sp, ackid = atomic_inc_return(&sp->ackid); reply.ackid = ackid; - reply.code = rave_sp_reply_code((u8)command), + reply.code = rave_sp_reply_code((u8)command); mutex_lock(&sp->bus_lock); diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 5e81f011363f..2c0e8e9630f7 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -230,7 +230,7 @@ static const struct regmap_config rc5t583_regmap_config = { .volatile_reg = volatile_reg, .max_register = RC5T583_MAX_REG, .num_reg_defaults_raw = RC5T583_NUM_REGS, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static int rc5t583_i2c_probe(struct i2c_client *i2c) diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c index b1ffc3b9e2be..e2261b68b844 100644 --- a/drivers/mfd/rk8xx-core.c +++ b/drivers/mfd/rk8xx-core.c @@ -43,8 +43,8 @@ static struct resource rk806_pwrkey_resources[] = { }; static const struct resource rk817_pwrkey_resources[] = { - DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE), DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL), + DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE), }; static const struct resource rk817_charger_resources[] = { diff --git a/drivers/mfd/rk8xx-spi.c b/drivers/mfd/rk8xx-spi.c index fd137f38c2c4..3405fb82ff9f 100644 --- a/drivers/mfd/rk8xx-spi.c +++ b/drivers/mfd/rk8xx-spi.c @@ -34,7 +34,7 @@ static const struct regmap_config rk806_regmap_config_spi = { .reg_bits = 16, .val_bits = 8, .max_register = RK806_BUCK_RSERVE_REG5, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .volatile_table = &rk806_volatile_table, }; diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index 7336e6d8a001..23ca00d2c624 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -62,7 +62,7 @@ static const struct regmap_config rn5t618_regmap_config = { .val_bits = 8, .volatile_reg = rn5t618_volatile_reg, .max_register = RN5T618_MAX_REG, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct regmap_irq rc5t619_irqs[] = { diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c index 594718f7e8e1..2f3826c7eef4 100644 --- a/drivers/mfd/rohm-bd71828.c +++ b/drivers/mfd/rohm-bd71828.c @@ -197,7 +197,7 @@ static const struct regmap_config bd71815_regmap = { .val_bits = 8, .volatile_table = &bd71815_volatile_regs, .max_register = BD71815_MAX_REGISTER - 1, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct regmap_config bd71828_regmap = { @@ -205,7 +205,7 @@ static const struct regmap_config bd71828_regmap = { .val_bits = 8, .volatile_table = &bd71828_volatile_regs, .max_register = BD71828_MAX_REGISTER, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; /* diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c index 4798bdf27afb..7755a4c073bf 100644 --- a/drivers/mfd/rohm-bd718x7.c +++ b/drivers/mfd/rohm-bd718x7.c @@ -87,7 +87,7 @@ static const struct regmap_config bd718xx_regmap_config = { .val_bits = 8, .volatile_table = &volatile_regs, .max_register = BD718XX_MAX_REGISTER - 1, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static int bd718xx_init_press_duration(struct regmap *regmap, diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c index bceac7016740..3a9f61961721 100644 --- a/drivers/mfd/rohm-bd9576.c +++ b/drivers/mfd/rohm-bd9576.c @@ -62,7 +62,7 @@ static struct regmap_config bd957x_regmap = { .val_bits = 8, .volatile_table = &volatile_regs, .max_register = BD957X_MAX_REGISTER, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static struct regmap_irq bd9576_irqs[] = { diff --git a/drivers/mfd/rsmu_i2c.c b/drivers/mfd/rsmu_i2c.c index 06d78a1cf1cc..5711e512b6a2 100644 --- a/drivers/mfd/rsmu_i2c.c +++ b/drivers/mfd/rsmu_i2c.c @@ -188,7 +188,7 @@ static const struct regmap_config rsmu_sabre_regmap_config = { .ranges = rsmu_sabre_range_cfg, .num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg), .volatile_reg = rsmu_sabre_volatile_reg, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .can_multi_write = true, }; diff --git a/drivers/mfd/si476x-prop.c b/drivers/mfd/si476x-prop.c index f0608d138f02..3d5c118888b2 100644 --- a/drivers/mfd/si476x-prop.c +++ b/drivers/mfd/si476x-prop.c @@ -222,7 +222,7 @@ static const struct regmap_config si476x_regmap_config = { .reg_read = si476x_core_regmap_read, .reg_write = si476x_core_regmap_write, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; struct regmap *devm_regmap_init_si476x(struct si476x_core *core) diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c index c02cbd9c2f5d..f391c2ccaa72 100644 --- a/drivers/mfd/stmfx.c +++ b/drivers/mfd/stmfx.c @@ -53,7 +53,7 @@ static const struct regmap_config stmfx_regmap_config = { .max_register = STMFX_REG_MAX, .volatile_reg = stmfx_reg_volatile, .writeable_reg = stmfx_reg_writeable, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; static const struct resource stmfx_pinctrl_resources[] = { diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c index c5128fe96cc7..d8a603d95aa6 100644 --- a/drivers/mfd/stpmic1.c +++ b/drivers/mfd/stpmic1.c @@ -63,7 +63,7 @@ static const struct regmap_access_table stpmic1_volatile_table = { static const struct regmap_config stpmic1_regmap_config = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .max_register = PMIC_MAX_REGISTER_ADDRESS, .rd_table = &stpmic1_readable_table, .wr_table = &stpmic1_writeable_table, diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index c9550368d9ea..7d0e91164cba 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -238,7 +238,9 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, return ERR_PTR(-ENODEV); regmap = syscon_node_to_regmap(syscon_np); - of_node_put(syscon_np); + + if (property) + of_node_put(syscon_np); return regmap; } diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 6e384a79e341..c130ffef182f 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -124,6 +124,11 @@ #define TWL6030_BASEADD_RSV 0x0000 #define TWL6030_BASEADD_ZERO 0x0000 +/* Some fields in TWL6030_PHOENIX_DEV_ON */ +#define TWL6030_APP_DEVOFF BIT(0) +#define TWL6030_CON_DEVOFF BIT(1) +#define TWL6030_MOD_DEVOFF BIT(2) + /* Few power values */ #define R_CFG_BOOT 0x05 @@ -687,6 +692,20 @@ static void twl_remove(struct i2c_client *client) twl_priv->ready = false; } +static void twl6030_power_off(void) +{ + int err; + u8 val; + + err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, TWL6030_PHOENIX_DEV_ON); + if (err) + return; + + val |= TWL6030_APP_DEVOFF | TWL6030_CON_DEVOFF | TWL6030_MOD_DEVOFF; + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val, TWL6030_PHOENIX_DEV_ON); +} + + static struct of_dev_auxdata twl_auxdata_lookup[] = { OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL), { /* sentinel */ }, @@ -852,6 +871,15 @@ twl_probe(struct i2c_client *client) goto free; } + if (twl_class_is_6030()) { + if (of_device_is_system_power_controller(node)) { + if (!pm_power_off) + pm_power_off = twl6030_power_off; + else + dev_warn(&client->dev, "Poweroff callback already assigned\n"); + } + } + status = of_platform_populate(node, NULL, twl_auxdata_lookup, &client->dev); diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 1595e9c76132..0bca948ab6ba 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -686,6 +686,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, if (of_property_read_bool(node, "ti,use_poweroff")) return true; + if (of_device_is_system_power_controller(node->parent)) + return true; + return false; } diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index f77ecc635b6f..6a8602c1c4ee 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -1922,7 +1922,7 @@ const struct regmap_config wm5102_spi_regmap = { .readable_reg = wm5102_readable_register, .volatile_reg = wm5102_volatile_register, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .reg_defaults = wm5102_reg_default, .num_reg_defaults = ARRAY_SIZE(wm5102_reg_default), }; diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index eba324875afd..6ff33a54a068 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -3202,7 +3202,7 @@ const struct regmap_config wm5110_spi_regmap = { .readable_reg = wm5110_readable_register, .volatile_reg = wm5110_volatile_register, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .reg_defaults = wm5110_reg_default, .num_reg_defaults = ARRAY_SIZE(wm5110_reg_default), }; diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c index 65b98f3fbd92..18618a8f9206 100644 --- a/drivers/mfd/wm831x-auxadc.c +++ b/drivers/mfd/wm831x-auxadc.c @@ -152,7 +152,7 @@ static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) static int wm831x_auxadc_read_polled(struct wm831x *wm831x, enum wm831x_auxadc input) { - int ret, src, timeout; + int ret, src; mutex_lock(&wm831x->auxadc_lock); @@ -179,32 +179,25 @@ static int wm831x_auxadc_read_polled(struct wm831x *wm831x, goto disable; } - /* If we're not using interrupts then poll the - * interrupt status register */ - timeout = 5; - while (timeout) { - msleep(1); + /* If we're not using interrupts then read the interrupt status register */ + msleep(20); - ret = wm831x_reg_read(wm831x, - WM831X_INTERRUPT_STATUS_1); - if (ret < 0) { - dev_err(wm831x->dev, - "ISR 1 read failed: %d\n", ret); - goto disable; - } + ret = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1); + if (ret < 0) { + dev_err(wm831x->dev, + "ISR 1 read failed: %d\n", ret); + goto disable; + } - /* Did it complete? */ - if (ret & WM831X_AUXADC_DATA_EINT) { - wm831x_reg_write(wm831x, - WM831X_INTERRUPT_STATUS_1, - WM831X_AUXADC_DATA_EINT); - break; - } else { - dev_err(wm831x->dev, - "AUXADC conversion timeout\n"); - ret = -EBUSY; - goto disable; - } + /* Did it complete? */ + if (ret & WM831X_AUXADC_DATA_EINT) { + wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_AUXADC_DATA_EINT); + } else { + dev_err(wm831x->dev, + "AUXADC conversion timeout\n"); + ret = -EBUSY; + goto disable; } ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 5663b8b0b3ad..3d0ebb004dbf 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -325,7 +325,7 @@ const struct regmap_config wm8350_regmap = { .reg_bits = 8, .val_bits = 16, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .max_register = WM8350_MAX_REGISTER, .readable_reg = wm8350_readable, diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 75483c9be0c4..ddfb234849dd 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -100,7 +100,7 @@ static const struct regmap_config wm8400_regmap_config = { .volatile_reg = wm8400_volatile, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, }; /** diff --git a/drivers/mfd/wm97xx-core.c b/drivers/mfd/wm97xx-core.c index 663acbb1854c..1566a9b04b6a 100644 --- a/drivers/mfd/wm97xx-core.c +++ b/drivers/mfd/wm97xx-core.c @@ -95,7 +95,7 @@ static const struct regmap_config wm9705_regmap_config = { .reg_stride = 2, .val_bits = 16, .max_register = 0x7e, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .reg_defaults = wm9705_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm9705_reg_defaults), @@ -163,7 +163,7 @@ static const struct regmap_config wm9712_regmap_config = { .reg_stride = 2, .val_bits = 16, .max_register = 0x7e, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .reg_defaults = wm9712_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm9712_reg_defaults), @@ -234,7 +234,7 @@ static const struct regmap_config wm9713_regmap_config = { .reg_stride = 2, .val_bits = 16, .max_register = 0x7e, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .reg_defaults = wm9713_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm9713_reg_defaults), diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index 27c995b657f2..aabef9fc84bd 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -11,7 +11,9 @@ #include <linux/errno.h> #include <linux/mfd/cs42l43.h> #include <linux/mfd/cs42l43-regs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index d78fe7137799..6bee137cfbe0 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -181,6 +181,17 @@ config BD957XMUF_WATCHDOG watchdog. Alternatively say M to compile the driver as a module, which will be called bd9576_wdt. +config CROS_EC_WATCHDOG + tristate "ChromeOS EC-based watchdog" + select WATCHDOG_CORE + depends on CROS_EC + help + Watchdog driver for Chromebook devices equipped with embedded controller. + Trigger event is recorded in EC and checked on the subsequent boot. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_wdt. + config DA9052_WATCHDOG tristate "Dialog DA9052 Watchdog" depends on PMIC_DA9052 || COMPILE_TEST diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7cbc34514ec1..3710c218f05e 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -217,6 +217,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o # Architecture Independent obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o +obj-$(CONFIG_CROS_EC_WATCHDOG) += cros_ec_wdt.o obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o diff --git a/drivers/watchdog/cros_ec_wdt.c b/drivers/watchdog/cros_ec_wdt.c new file mode 100644 index 000000000000..ba045e29f9a5 --- /dev/null +++ b/drivers/watchdog/cros_ec_wdt.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2024 Google LLC. + * Author: Lukasz Majczak <lma@chromium.com> + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_data/cros_ec_commands.h> +#include <linux/platform_data/cros_ec_proto.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define CROS_EC_WATCHDOG_DEFAULT_TIME 30 /* seconds */ +#define DRV_NAME "cros-ec-wdt" + +union cros_ec_wdt_data { + struct ec_params_hang_detect req; + struct ec_response_hang_detect resp; +} __packed; + +static int cros_ec_wdt_send_cmd(struct cros_ec_device *cros_ec, + union cros_ec_wdt_data *arg) +{ + int ret; + struct { + struct cros_ec_command msg; + union cros_ec_wdt_data data; + } __packed buf = { + .msg = { + .version = 0, + .command = EC_CMD_HANG_DETECT, + .insize = (arg->req.command == EC_HANG_DETECT_CMD_GET_STATUS) ? + sizeof(struct ec_response_hang_detect) : + 0, + .outsize = sizeof(struct ec_params_hang_detect), + }, + .data.req = arg->req + }; + + ret = cros_ec_cmd_xfer_status(cros_ec, &buf.msg); + if (ret < 0) + return ret; + + arg->resp = buf.data.resp; + + return 0; +} + +static int cros_ec_wdt_ping(struct watchdog_device *wdd) +{ + struct cros_ec_device *cros_ec = watchdog_get_drvdata(wdd); + union cros_ec_wdt_data arg; + int ret; + + arg.req.command = EC_HANG_DETECT_CMD_RELOAD; + ret = cros_ec_wdt_send_cmd(cros_ec, &arg); + if (ret < 0) + dev_dbg(wdd->parent, "Failed to ping watchdog (%d)", ret); + + return ret; +} + +static int cros_ec_wdt_start(struct watchdog_device *wdd) +{ + struct cros_ec_device *cros_ec = watchdog_get_drvdata(wdd); + union cros_ec_wdt_data arg; + int ret; + + /* Prepare watchdog on EC side */ + arg.req.command = EC_HANG_DETECT_CMD_SET_TIMEOUT; + arg.req.reboot_timeout_sec = wdd->timeout; + ret = cros_ec_wdt_send_cmd(cros_ec, &arg); + if (ret < 0) + dev_dbg(wdd->parent, "Failed to start watchdog (%d)", ret); + + return ret; +} + +static int cros_ec_wdt_stop(struct watchdog_device *wdd) +{ + struct cros_ec_device *cros_ec = watchdog_get_drvdata(wdd); + union cros_ec_wdt_data arg; + int ret; + + arg.req.command = EC_HANG_DETECT_CMD_CANCEL; + ret = cros_ec_wdt_send_cmd(cros_ec, &arg); + if (ret < 0) + dev_dbg(wdd->parent, "Failed to stop watchdog (%d)", ret); + + return ret; +} + +static int cros_ec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t) +{ + unsigned int old_timeout = wdd->timeout; + int ret; + + wdd->timeout = t; + ret = cros_ec_wdt_start(wdd); + if (ret < 0) + wdd->timeout = old_timeout; + + return ret; +} + +static const struct watchdog_info cros_ec_wdt_ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = DRV_NAME, +}; + +static const struct watchdog_ops cros_ec_wdt_ops = { + .owner = THIS_MODULE, + .ping = cros_ec_wdt_ping, + .start = cros_ec_wdt_start, + .stop = cros_ec_wdt_stop, + .set_timeout = cros_ec_wdt_set_timeout, +}; + +static int cros_ec_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent); + struct cros_ec_device *cros_ec = ec_dev->ec_dev; + struct watchdog_device *wdd; + union cros_ec_wdt_data arg; + int ret = 0; + + wdd = devm_kzalloc(&pdev->dev, sizeof(*wdd), GFP_KERNEL); + if (!wdd) + return -ENOMEM; + + arg.req.command = EC_HANG_DETECT_CMD_GET_STATUS; + ret = cros_ec_wdt_send_cmd(cros_ec, &arg); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get watchdog bootstatus"); + + wdd->parent = &pdev->dev; + wdd->info = &cros_ec_wdt_ident; + wdd->ops = &cros_ec_wdt_ops; + wdd->timeout = CROS_EC_WATCHDOG_DEFAULT_TIME; + wdd->min_timeout = EC_HANG_DETECT_MIN_TIMEOUT; + wdd->max_timeout = EC_HANG_DETECT_MAX_TIMEOUT; + if (arg.resp.status == EC_HANG_DETECT_AP_BOOT_EC_WDT) + wdd->bootstatus = WDIOF_CARDRESET; + + arg.req.command = EC_HANG_DETECT_CMD_CLEAR_STATUS; + ret = cros_ec_wdt_send_cmd(cros_ec, &arg); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to clear watchdog bootstatus"); + + watchdog_stop_on_reboot(wdd); + watchdog_stop_on_unregister(wdd); + watchdog_set_drvdata(wdd, cros_ec); + platform_set_drvdata(pdev, wdd); + + return devm_watchdog_register_device(dev, wdd); +} + +static int __maybe_unused cros_ec_wdt_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + int ret = 0; + + if (watchdog_active(wdd)) + ret = cros_ec_wdt_stop(wdd); + + return ret; +} + +static int __maybe_unused cros_ec_wdt_resume(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + int ret = 0; + + if (watchdog_active(wdd)) + ret = cros_ec_wdt_start(wdd); + + return ret; +} + +static const struct platform_device_id cros_ec_wdt_id[] = { + { DRV_NAME, 0 }, + {} +}; + +static struct platform_driver cros_ec_wdt_driver = { + .probe = cros_ec_wdt_probe, + .suspend = pm_ptr(cros_ec_wdt_suspend), + .resume = pm_ptr(cros_ec_wdt_resume), + .driver = { + .name = DRV_NAME, + }, + .id_table = cros_ec_wdt_id, +}; + +module_platform_driver(cros_ec_wdt_driver); + +MODULE_DEVICE_TABLE(platform, cros_ec_wdt_id); +MODULE_DESCRIPTION("Cros EC Watchdog Device Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/cs42l43.h b/include/linux/mfd/cs42l43.h index cf8263aab41b..2239d8585e78 100644 --- a/include/linux/mfd/cs42l43.h +++ b/include/linux/mfd/cs42l43.h @@ -6,20 +6,21 @@ * Cirrus Logic International Semiconductor Ltd. */ +#ifndef CS42L43_CORE_EXT_H +#define CS42L43_CORE_EXT_H + #include <linux/completion.h> -#include <linux/device.h> -#include <linux/gpio/consumer.h> #include <linux/mutex.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include <linux/soundwire/sdw.h> #include <linux/workqueue.h> -#ifndef CS42L43_CORE_EXT_H -#define CS42L43_CORE_EXT_H - #define CS42L43_N_SUPPLIES 3 +struct device; +struct gpio_desc; +struct sdw_slave; + enum cs42l43_irq_numbers { CS42L43_PLL_LOST_LOCK, CS42L43_PLL_READY, diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h index ea0ccf33a459..021f820f9d52 100644 --- a/include/linux/mfd/sun4i-gpadc.h +++ b/include/linux/mfd/sun4i-gpadc.h @@ -81,8 +81,8 @@ #define SUN4I_GPADC_TEMP_DATA 0x20 #define SUN4I_GPADC_DATA 0x24 -#define SUN4I_GPADC_IRQ_FIFO_DATA 0 -#define SUN4I_GPADC_IRQ_TEMP_DATA 1 +#define SUN4I_GPADC_IRQ_FIFO_DATA 1 +#define SUN4I_GPADC_IRQ_TEMP_DATA 2 /* 10s delay before suspending the IP */ #define SUN4I_GPADC_AUTOSUSPEND_DELAY 10000 diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h index fecc2fa2a364..c315903f6dab 100644 --- a/include/linux/mfd/syscon.h +++ b/include/linux/mfd/syscon.h @@ -17,20 +17,17 @@ struct device_node; #ifdef CONFIG_MFD_SYSCON -extern struct regmap *device_node_to_regmap(struct device_node *np); -extern struct regmap *syscon_node_to_regmap(struct device_node *np); -extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s); -extern struct regmap *syscon_regmap_lookup_by_phandle( - struct device_node *np, - const char *property); -extern struct regmap *syscon_regmap_lookup_by_phandle_args( - struct device_node *np, - const char *property, - int arg_count, - unsigned int *out_args); -extern struct regmap *syscon_regmap_lookup_by_phandle_optional( - struct device_node *np, - const char *property); +struct regmap *device_node_to_regmap(struct device_node *np); +struct regmap *syscon_node_to_regmap(struct device_node *np); +struct regmap *syscon_regmap_lookup_by_compatible(const char *s); +struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, + const char *property); +struct regmap *syscon_regmap_lookup_by_phandle_args(struct device_node *np, + const char *property, + int arg_count, + unsigned int *out_args); +struct regmap *syscon_regmap_lookup_by_phandle_optional(struct device_node *np, + const char *property); #else static inline struct regmap *device_node_to_regmap(struct device_node *np) { diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h index c062d91a67d9..85dc406173db 100644 --- a/include/linux/mfd/twl.h +++ b/include/linux/mfd/twl.h @@ -461,6 +461,7 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define TWL4030_PM_MASTER_GLOBAL_TST 0xb6 +#define TWL6030_PHOENIX_DEV_ON 0x06 /*----------------------------------------------------------------------*/ /* Power bus message definitions */ diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 7dae17b62a4d..ecc47d5fe239 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -3961,60 +3961,52 @@ struct ec_response_i2c_passthru { } __ec_align1; /*****************************************************************************/ -/* Power button hang detect */ - +/* AP hang detect */ #define EC_CMD_HANG_DETECT 0x009F -/* Reasons to start hang detection timer */ -/* Power button pressed */ -#define EC_HANG_START_ON_POWER_PRESS BIT(0) - -/* Lid closed */ -#define EC_HANG_START_ON_LID_CLOSE BIT(1) - - /* Lid opened */ -#define EC_HANG_START_ON_LID_OPEN BIT(2) - -/* Start of AP S3->S0 transition (booting or resuming from suspend) */ -#define EC_HANG_START_ON_RESUME BIT(3) - -/* Reasons to cancel hang detection */ +#define EC_HANG_DETECT_MIN_TIMEOUT 5 +#define EC_HANG_DETECT_MAX_TIMEOUT 65535 -/* Power button released */ -#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8) +/* EC hang detect commands */ +enum ec_hang_detect_cmds { + /* Reload AP hang detect timer. */ + EC_HANG_DETECT_CMD_RELOAD = 0x0, -/* Any host command from AP received */ -#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9) + /* Stop AP hang detect timer. */ + EC_HANG_DETECT_CMD_CANCEL = 0x1, -/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ -#define EC_HANG_STOP_ON_SUSPEND BIT(10) + /* Configure watchdog with given reboot timeout and + * cancel currently running AP hang detect timer. + */ + EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2, -/* - * If this flag is set, all the other fields are ignored, and the hang detect - * timer is started. This provides the AP a way to start the hang timer - * without reconfiguring any of the other hang detect settings. Note that - * you must previously have configured the timeouts. - */ -#define EC_HANG_START_NOW BIT(30) + /* Get last hang status - whether the AP boot was clear or not */ + EC_HANG_DETECT_CMD_GET_STATUS = 0x3, -/* - * If this flag is set, all the other fields are ignored (including - * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer - * without reconfiguring any of the other hang detect settings. - */ -#define EC_HANG_STOP_NOW BIT(31) + /* Clear last hang status. Called when AP is rebooting/shutting down + * gracefully. + */ + EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4 +}; struct ec_params_hang_detect { - /* Flags; see EC_HANG_* */ - uint32_t flags; - - /* Timeout in msec before generating host event, if enabled */ - uint16_t host_event_timeout_msec; + uint16_t command; /* enum ec_hang_detect_cmds */ + /* Timeout in seconds before generating reboot */ + uint16_t reboot_timeout_sec; +} __ec_align2; - /* Timeout in msec before generating warm reboot, if enabled */ - uint16_t warm_reboot_timeout_msec; -} __ec_align4; +/* Status codes that describe whether AP has boot normally or the hang has been + * detected and EC has reset AP + */ +enum ec_hang_detect_status { + EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0, + EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1, + EC_HANG_DETECT_AP_BOOT_COUNT, +}; +struct ec_response_hang_detect { + uint8_t status; /* enum ec_hang_detect_status */ +} __ec_align1; /*****************************************************************************/ /* Commands for battery charging */ |