avr32: Allow selecting multiple pins at once

at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

1 files changed, 27 insertions, 14 deletions

diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index ef2561e15399..ed81a8bcb22d 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
 }
 
 /* Pin multiplexing API */
+static DEFINE_SPINLOCK(pio_lock);
 
-void __init at32_select_periph(unsigned int pin, unsigned int periph,
-			       unsigned long flags)
+void __init at32_select_periph(unsigned int port, u32 pin_mask,
+			       unsigned int periph, unsigned long flags)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
-	u32 mask = 1 << pin_index;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
-			 || gpiochip_is_requested(&pio->chip, pin_index))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
-	pio_writel(pio, PUER, mask);
+	pio->pinmux_mask |= pin_mask;
+
+	/* enable pull ups */
+	pio_writel(pio, PUER, pin_mask);
+
+	/* select either peripheral A or B */
 	if (periph)
-		pio_writel(pio, BSR, mask);
+		pio_writel(pio, BSR, pin_mask);
 	else
-		pio_writel(pio, ASR, mask);
+		pio_writel(pio, ASR, pin_mask);
+
+	/* enable peripheral control */
+	pio_writel(pio, PDR, pin_mask);
 
-	pio_writel(pio, PDR, mask);
+	/* Disable pull ups if not requested. */
 	if (!(flags & AT32_GPIOF_PULLUP))
-		pio_writel(pio, PUDR, mask);
+		pio_writel(pio, PUDR, pin_mask);
+
+	spin_unlock(&pio_lock);
 
 	return;