Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...

1 files changed, 91 insertions, 33 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index bea982af9cfb..5ed257c4cd4e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -10,7 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015	Intel Deutschland GmbH
+ * Copyright 2015-2017	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -854,12 +854,15 @@
  *	cfg80211_scan_done().
  *
  * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
- *	%NL80211_ATTR_WDEV interface. This interface must have been previously
- *	created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
- *	NAN interface will create or join a cluster. This command must have a
- *	valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
- *	%NL80211_ATTR_NAN_DUAL attributes.
- *	After this command NAN functions can be added.
+ *	%NL80211_ATTR_WDEV interface. This interface must have been
+ *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
+ *	has been started, the NAN interface will create or join a
+ *	cluster. This command must have a valid
+ *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
+ *	omitted or set to 0, it means don't-care and the device will
+ *	decide what to use.  After this command NAN functions can be
+ *	added.
  * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
  *	its %NL80211_ATTR_WDEV interface.
  * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
@@ -880,10 +883,14 @@
  *	This command is also used as a notification sent when a NAN function is
  *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
  *	and %NL80211_ATTR_COOKIE attributes.
- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
- *	must be operational (%NL80211_CMD_START_NAN was executed).
- *	It must contain at least one of the following attributes:
- *	%NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
+ *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
+ *	was executed).  It must contain at least one of the following
+ *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
+ *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
+ *	current configuration is not changed.  If it is present but
+ *	set to zero, the configuration is changed to don't-care
+ *	(i.e. the device can decide what to do).
  * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
@@ -1822,6 +1829,8 @@ enum nl80211_commands {
  *	and remove functions. NAN notifications will be sent in unicast to that
  *	socket. Without this attribute, any socket can add functions and the
  *	notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
+ *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ *	station will deauthenticate when the socket is closed.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1961,10 +1970,13 @@ enum nl80211_commands {
  *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
  *	Also, values 1 and 255 are reserved for certification purposes and
  *	should not be used during a normal device operation.
- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
- *	&enum nl80211_nan_dual_band_conf). This attribute is used with
- *	%NL80211_CMD_START_NAN and optionally with
- *	%NL80211_CMD_CHANGE_NAN_CONFIG.
+ * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
+ *	bitmask of BIT(NL80211_BAND_*) as described in %enum
+ *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
+ *	would be set.  This attribute is used with
+ *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
+ *	it is optional.  If no bands are set, it means don't-care and
+ *	the device will decide what to use.
  * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
  *	&enum nl80211_nan_func_attributes for description of this nested
  *	attribute.
@@ -1982,6 +1994,24 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
  *	used in various commands/events for specifying the BSSID.
  *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ *	other BSSs has to be better or slightly worse than the current
+ *	connected BSS so that they get reported to user space.
+ *	This will give an opportunity to userspace to consider connecting to
+ *	other matching BSSs which have better or slightly worse RSSI than
+ *	the current connected BSS by using an offloaded operation to avoid
+ *	unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ *	the specified band is to be adjusted before doing
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ *	better BSSs. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ *	e.g., with %NL80211_CMD_CONNECT event.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2377,7 +2407,7 @@ enum nl80211_attrs {
 	NL80211_ATTR_MESH_PEER_AID,
 
 	NL80211_ATTR_NAN_MASTER_PREF,
-	NL80211_ATTR_NAN_DUAL,
+	NL80211_ATTR_BANDS,
 	NL80211_ATTR_NAN_FUNC,
 	NL80211_ATTR_NAN_MATCH,
 
@@ -2388,6 +2418,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_BSSID,
 
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+	NL80211_ATTR_TIMEOUT_REASON,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3080,6 +3115,13 @@ enum nl80211_reg_rule_attr {
  *	how this API was implemented in the past. Also, due to the same problem,
  *	the only way to create a matchset with only an RSSI filter (with this
  *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ *	relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3089,6 +3131,8 @@ enum nl80211_sched_scan_match_attr {
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -3918,6 +3962,8 @@ enum nl80211_ps_state {
  *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
  * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
  *	loss event
+ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
+ *	RSSI threshold event.
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -3931,6 +3977,7 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_TXE_PKTS,
 	NL80211_ATTR_CQM_TXE_INTVL,
 	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
+	NL80211_ATTR_CQM_RSSI_LEVEL,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
@@ -4699,6 +4746,13 @@ enum nl80211_feature_flags {
  *	configuration (AP/mesh) with VHT rates.
  * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
  *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ *	in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ *	randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ *	for reporting BSSs with better RSSI than the current connected BSS
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4714,6 +4768,9 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_BEACON_RATE_HT,
 	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
 	NL80211_EXT_FEATURE_FILS_STA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4753,6 +4810,21 @@ enum nl80211_connect_failed_reason {
 };
 
 /**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+	NL80211_TIMEOUT_UNSPECIFIED,
+	NL80211_TIMEOUT_SCAN,
+	NL80211_TIMEOUT_AUTH,
+	NL80211_TIMEOUT_ASSOC,
+};
+
+/**
  * enum nl80211_scan_flags -  scan request control flags
  *
  * Scan request control flags are used to control the handling
@@ -4966,8 +5038,9 @@ enum nl80211_sched_scan_plan {
 /**
  * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
  *
- * @band: band of BSS that must match for RSSI value adjustment.
- * @delta: value used to adjust the RSSI value of matching BSS.
+ * @band: band of BSS that must match for RSSI value adjustment. The value
+ *	of this field is according to &enum nl80211_band.
+ * @delta: value used to adjust the RSSI value of matching BSS in dB.
  */
 struct nl80211_bss_select_rssi_adjust {
 	__u8 band;
@@ -5008,21 +5081,6 @@ enum nl80211_bss_select_attr {
 };
 
 /**
- * enum nl80211_nan_dual_band_conf - NAN dual band configuration
- *
- * Defines the NAN dual band mode of operation
- *
- * @NL80211_NAN_BAND_DEFAULT: device default mode
- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
- * @NL80211_NAN_BAND_5GHZ: 5GHz mode
-  */
-enum nl80211_nan_dual_band_conf {
-	NL80211_NAN_BAND_DEFAULT	= 1 << 0,
-	NL80211_NAN_BAND_2GHZ		= 1 << 1,
-	NL80211_NAN_BAND_5GHZ		= 1 << 2,
-};
-
-/**
  * enum nl80211_nan_function_type - NAN function type
  *
  * Defines the function type of a NAN function