summaryrefslogtreecommitdiffstats
path: root/arch/arc/mm/cache.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arc/mm/cache.c')
-rw-r--r--arch/arc/mm/cache.c155
1 files changed, 122 insertions, 33 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index ec86ac0e3321..d408fa21a07c 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -23,7 +23,7 @@
static int l2_line_sz;
static int ioc_exists;
-int slc_enable = 1, ioc_enable = 0;
+int slc_enable = 1, ioc_enable = 1;
unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
@@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
/*
* For ARC700 MMUv3 I-cache and D-cache flushes
- * Also reused for HS38 aliasing I-cache configuration
+ * - ARC700 programming model requires paddr and vaddr be passed in seperate
+ * AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
+ * caches actually alias or not.
+ * - For HS38, only the aliasing I-cache configuration uses the PTAG reg
+ * (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
*/
static inline
void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
@@ -458,6 +462,21 @@ static inline void __dc_entire_op(const int op)
__after_dc_op(op);
}
+static inline void __dc_disable(void)
+{
+ const int r = ARC_REG_DC_CTRL;
+
+ __dc_entire_op(OP_FLUSH_N_INV);
+ write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS);
+}
+
+static void __dc_enable(void)
+{
+ const int r = ARC_REG_DC_CTRL;
+
+ write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS);
+}
+
/* For kernel mappings cache operation: index is same as paddr */
#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
@@ -483,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
#else
#define __dc_entire_op(op)
+#define __dc_disable()
+#define __dc_enable()
#define __dc_line_op(paddr, vaddr, sz, op)
#define __dc_line_op_k(paddr, sz, op)
@@ -597,6 +618,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
#endif
}
+noinline static void slc_entire_op(const int op)
+{
+ unsigned int ctrl, r = ARC_REG_SLC_CTRL;
+
+ ctrl = read_aux_reg(r);
+
+ if (!(op & OP_FLUSH)) /* i.e. OP_INV */
+ ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */
+ else
+ ctrl |= SLC_CTRL_IM;
+
+ write_aux_reg(r, ctrl);
+
+ write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+
+ /* Important to wait for flush to complete */
+ while (read_aux_reg(r) & SLC_CTRL_BUSY);
+}
+
+static inline void arc_slc_disable(void)
+{
+ const int r = ARC_REG_SLC_CTRL;
+
+ slc_entire_op(OP_FLUSH_N_INV);
+ write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS);
+}
+
+static inline void arc_slc_enable(void)
+{
+ const int r = ARC_REG_SLC_CTRL;
+
+ write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS);
+}
+
/***********************************************************
* Exported APIs
*/
@@ -923,21 +978,54 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
return 0;
}
-void arc_cache_init(void)
+/*
+ * IO-Coherency (IOC) setup rules:
+ *
+ * 1. Needs to be at system level, so only once by Master core
+ * Non-Masters need not be accessing caches at that time
+ * - They are either HALT_ON_RESET and kick started much later or
+ * - if run on reset, need to ensure that arc_platform_smp_wait_to_boot()
+ * doesn't perturb caches or coherency unit
+ *
+ * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC,
+ * otherwise any straggler data might behave strangely post IOC enabling
+ *
+ * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
+ * Coherency transactions
+ */
+noinline void __init arc_ioc_setup(void)
{
- unsigned int __maybe_unused cpu = smp_processor_id();
- char str[256];
+ unsigned int ap_sz;
- printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+ /* Flush + invalidate + disable L1 dcache */
+ __dc_disable();
+
+ /* Flush + invalidate SLC */
+ if (read_aux_reg(ARC_REG_SLC_BCR))
+ slc_entire_op(OP_FLUSH_N_INV);
+
+ /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */
+ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
/*
- * Only master CPU needs to execute rest of function:
- * - Assume SMP so all cores will have same cache config so
- * any geomtry checks will be same for all
- * - IOC setup / dma callbacks only need to be setup once
+ * IOC Aperture size:
+ * decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M
+ * TBD: fix for PGU + 1GB of low mem
+ * TBD: fix for PAE
*/
- if (cpu)
- return;
+ ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2;
+ write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz);
+
+ write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
+ write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+
+ /* Re-enable L1 dcache */
+ __dc_enable();
+}
+
+void __init arc_cache_init_master(void)
+{
+ unsigned int __maybe_unused cpu = smp_processor_id();
if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
@@ -985,30 +1073,14 @@ void arc_cache_init(void)
}
}
- if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
-
- /* IM set : flush before invalidate */
- write_aux_reg(ARC_REG_SLC_CTRL,
- read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
+ /* Note that SLC disable not formally supported till HS 3.0 */
+ if (is_isa_arcv2() && l2_line_sz && !slc_enable)
+ arc_slc_disable();
- write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
-
- /* Important to wait for flush to complete */
- while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
- write_aux_reg(ARC_REG_SLC_CTRL,
- read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
- }
+ if (is_isa_arcv2() && ioc_enable)
+ arc_ioc_setup();
if (is_isa_arcv2() && ioc_enable) {
- /* IO coherency base - 0x8z */
- write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
- /* IO coherency aperture size - 512Mb: 0x8z-0xAz */
- write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
- /* Enable partial writes */
- write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
- /* Enable IO coherency */
- write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
-
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
__dma_cache_inv = __dma_cache_inv_ioc;
__dma_cache_wback = __dma_cache_wback_ioc;
@@ -1022,3 +1094,20 @@ void arc_cache_init(void)
__dma_cache_wback = __dma_cache_wback_l1;
}
}
+
+void __ref arc_cache_init(void)
+{
+ unsigned int __maybe_unused cpu = smp_processor_id();
+ char str[256];
+
+ printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+ /*
+ * Only master CPU needs to execute rest of function:
+ * - Assume SMP so all cores will have same cache config so
+ * any geomtry checks will be same for all
+ * - IOC setup / dma callbacks only need to be setup once
+ */
+ if (!cpu)
+ arc_cache_init_master();
+}