summaryrefslogtreecommitdiffstats
path: root/net/mac80211/pm.c
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: flush delayed work when entering suspendMatt Chen2017-02-271-0/+1
| | | | | | | | | | | | | | | | | The issue was found when entering suspend and resume. It triggers a warning in: mac80211/key.c: ieee80211_enable_keys() ... WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || sdata->crypto_tx_tailroom_pending_dec); ... It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully in a delayed_work during suspend. Add a flush_delayed_work to fix it. Cc: stable@vger.kernel.org Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove useless open_count checkJohannes Berg2016-09-131-2/+1
| | | | | | | | __ieee80211_suspend() checks early on if there's anything to do by checking open_count, so there's no need to check again later in the function. Remove the useless check. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't reconfigure sched scan in case of wowlanEliad Peller2015-11-031-0/+11
| | | | | | | | | | | | | | | | Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't tear down aggregation on suspend in case of wowlan->anyEliad Peller2015-09-291-1/+2
| | | | | | | | | | | | | | | | | In case of "any" wowlan trigger, there is no reason to tear down aggregations, as we want the device to continue working normally. Similarly, there's no reason to tear down aggregations on resume, as they should have been torn down on suspend if needed. However, since the reconfiguration flow is shared with HW restart, tear down aggregations on reconfiguration when we are not resuming. To keep things working after non-wowlan suspend, keep clearing the WLAN_STA_BLOCK_BA flag. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: wowlan: enable powersave if suspend while ps-pollingChaitanya T K2015-07-171-0/+16
| | | | | | | | | | | | | | | | If for any reason we're in the middle of PS-polling or awake after TX due to dynamic powersave while going to suspend, go back to save power. This might cause a response frame to get lost, but since we can't really wait for it while going to suspend that's still better than not enabling powersave which would cause higher power usage during (and possibly even after) suspend. Note that this really only affects the very few drivers that use the powersave implementation in mac80211. Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com> [rewrite misleading commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: convert HW flags to unsigned long bitmapJohannes Berg2015-06-101-2/+2
| | | | | | | | | | | | | | | As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: start queues if driver rejected wowlanJohannes Berg2015-03-041-0/+7
| | | | | | | | | | If the driver rejects WoWLAN, restart the queues before returning to cfg80211. cfg80211 will return to mac80211, but not before it disconnects all interfaces. If we don't start the queues, any of the packets needed for disconnecting won't be transmitted, which is strange. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove useless double check for open_count in __ieee80211_suspend()Luciano Coelho2015-03-041-1/+1
| | | | | | | | | | | We check local->open_count at the top of the __ieee80211_suspend(), so there's no need to check for it again. open_count is protected by the rtnl, so there's no chance for it to have change between the two calls. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't do driver suspend with auth/assoc in progressJohannes Berg2015-03-041-1/+18
| | | | | | | | | | | | | | | | Drivers can't really be expected to suspend properly while auth or assoc is in progress since then they don't have any state they could keep with WoWLAN, nor can they actually finish the authentication or association. In fact, keeping this can cause subtle issues with drivers like iwlwifi that refuse WoWLAN if not associated, but have trouble figuring out what's going on in the middle of association. In any case, regardless of possible driver issues in this area, it doesn't make sense for mac80211 to try to WoWLAN-suspend in the middle of such operations, so stop them before. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-271-14/+15
|\ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: only roll back station states for WDS when suspendingLuciano Coelho2015-01-231-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In normal cases (i.e. when we are fully associated), cfg80211 takes care of removing all the stations before calling suspend in mac80211. But in the corner case when we suspend during authentication or association, mac80211 needs to roll back the station states. But we shouldn't roll back the station states in the suspend function, because this is taken care of in other parts of the code, except for WDS interfaces. For AP types of interfaces, cfg80211 takes care of disconnecting all stations before calling the driver's suspend code. For station interfaces, this is done in the quiesce code. For WDS interfaces we still need to do it here, so move the code into a new switch case for WDS. Cc: stable@kernel.org [3.15+] Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: let flush() drop packets when possibleEmmanuel Grumbach2015-01-141-1/+1
|/ | | | | | | | | | | | | | | | When roaming / suspending, it makes no sense to wait until the transmit queues of the device are empty. In extreme condition they can be starved (VO saturating the air), but even in regular cases, it is pointless to delay the roaming because the low level driver is trying to send packets to an AP which is far away. We'd rather drop these packets and let TCP retransmit if needed. This will allow to speed up the roaming. For suspend, the explanation is even more trivial. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: introduce refcount for queue_stop_reasonsLuciano Coelho2014-06-231-2/+4
| | | | | | | | | | | | | Sometimes different vifs may be stopping the queues for the same reason (e.g. when several interfaces are performing a channel switch). Instead of using a bitmask for the reasons, use an integer that holds a refcount instead. In order to keep it backwards compatible, introduce a boolean in some functions that tell us whether the queue stopping should be refcounted or not. For now, use not refcounted for all calls to keep it functionally the same as before. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix suspend vs. authentication raceJohannes Berg2014-03-191-3/+11
| | | | | | | | | | | | | | | Since Stanislaw's patch removing the quiescing code, mac80211 had a race regarding suspend vs. authentication: as cfg80211 doesn't track authentication attempts, it can't abort them. Therefore the attempts may be kept running while suspending, which can lead to all kinds of issues, in at least some cases causing an error in iwlmvm firmware. Fix this by aborting the authentication attempt when suspending. Cc: stable@vger.kernel.org Fixes: 12e7f517029d ("mac80211: cleanup generic suspend/resume procedures") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't delay station destructionJohannes Berg2013-12-161-2/+1
| | | | | | | | | | | | If we can assume that stations are never referenced by the driver after sta_state returns (and this is true since the previous iwlmvm patch and for all other drivers) then we don't need to delay station destruction, and don't need to play tricks with rcu_barrier() etc. This should speed up some scenarios like hostapd shutdown. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix monitor interface suspend crash regressionStanislaw Gruszka2013-07-231-2/+5
| | | | | | | | | | | | | | | | | | | | | | | My commit: commit 12e7f517029dad819c45eca9ca01fdb9ba57616b Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Feb 28 10:55:26 2013 +0100 mac80211: cleanup generic suspend/resume procedures removed check for deleting MONITOR and AP_VLAN when suspend. That can cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove interface in the driver that we did not add before. Reference: http://marc.info/?l=linux-kernel&m=137391815113860&w=2 Bisected-by: Ortwin Glück <odi@odi.ch> Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use synchronize_rcu() with rcu_barrier()Bob Copeland2013-04-221-0/+1
| | | | | | | | | | | | | | | The RCU docs used to state that rcu_barrier() included a wait for an RCU grace period; however the comments for rcu_barrier() as of commit f0a0e6f... "rcu: Clarify memory-ordering properties of grace-period primitives" contradict this. So add back synchronize_{rcu,net}() to where they once were, but keep the rcu_barrier()s for the call_rcu() callbacks. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bob Copeland <bob@cozybit.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix station entry leak/warning while suspendingJohannes Berg2013-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | Since Stanislaw's patches, when suspending while connected, cfg80211 will disconnect. This causes the AP station to be removed, which uses call_rcu() to clean up. Due to needing process context, this queues a work struct on the mac80211 workqueue. This will warn and fail when already suspended, which can happen if the rcu call doesn't happen quickly. To fix this, replace the synchronize_net() which is really just synchronize_rcu_expedited() with rcu_barrier(), which unlike synchronize_rcu() waits until RCU callback have run and thus avoids this issue. In theory, this can even happen without Stanislaw's change to disconnect on suspend since userspace might disconnect just before suspending, though then it's unlikely that the call_rcu() will be delayed long enough. Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: destroy virtual monitor interface across suspendJohannes Berg2013-04-081-4/+2
| | | | | | | | | It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: purge remain-on-channel items when suspendingJohannes Berg2013-04-081-0/+2
| | | | | | | | | | They can't really be executed while suspended and could trigger work warnings, so abort all ROC items. When the system resumes the notifications about this will be delivered to userspace which can then act accordingly (though it will assume they were canceled/finished.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: stop queues temporarily for flushingJohannes Berg2013-03-181-1/+3
| | | | | | | | | | Sometimes queues are flushed in the middle of operation, which can lead to driver issues. Stop queues temporarily, while flushing, to avoid transmitting new packets while they are being flushed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: pass queue bitmap to flush operationJohannes Berg2013-03-181-1/+1
| | | | | | | | | | There are a number of situations in which mac80211 only really needs to flush queues for one virtual interface, and in fact during this frames might be transmitted on other virtual interfaces. Calculate and pass a queue bitmap to the driver so it knows which queues to flush. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: cleanup generic suspend/resume proceduresStanislaw Gruszka2013-03-061-109/+6
| | | | | | | | | | Since now we disconnect before suspend, various code which save connection state can now be removed from suspend and resume procedure. Cleanup on resume side is smaller as ieee80211_reconfig() is also used for H/W restart. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: disconnect on suspendStanislaw Gruszka2013-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If possible that after suspend, cfg80211 will receive request to disconnect what require action on interface that was removed during suspend. Problem can manifest itself by various warnings similar to below one: WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]() wlan0: Failed check-sdata-in-driver check, flags: 0x4 Call Trace: [<c043e0b3>] warn_slowpath_fmt+0x33/0x40 [<f83707c9>] ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211] [<f83a660a>] ieee80211_recalc_ps_vif+0x2a/0x30 [mac80211] [<f83a6706>] ieee80211_set_disassoc+0xf6/0x500 [mac80211] [<f83a9441>] ieee80211_mgd_deauth+0x1f1/0x280 [mac80211] [<f8381b36>] ieee80211_deauth+0x16/0x20 [mac80211] [<f8261e70>] cfg80211_mlme_down+0x70/0xc0 [cfg80211] [<f8264de1>] __cfg80211_disconnect+0x1b1/0x1d0 [cfg80211] To fix the problem disconnect from any associated network before suspend. User space is responsible to establish connection again after resume. This basically need to be done by user space anyway, because associated stations can go away during suspend (for example NetworkManager disconnects on suspend and connect on resume by default). Patch also handle situation when driver refuse to suspend with wowlan configured and try to suspend again without it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add radar detection command/eventSimon Wunderlich2013-02-151-0/+2
| | | | | | | | | | | | | | | | Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: support reporting wakeup reasonJohannes Berg2013-01-311-0/+10
| | | | | | | | | When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: split aggregation stop by reasonJohannes Berg2013-01-031-1/+2
| | | | | | | | | | The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: assign bss_conf.bssid only onceJohannes Berg2013-01-031-0/+3
| | | | | | | | | | Instead of checking every time bss_info_changed is called, assign the pointer once depending on the interface type and then leave it untouched until the interface type is changed. This makes the ieee80211_bss_info_change_notify() now a simple wrapper to call the driver only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: further simplify ieee80211_bss_info_change_notifyJohannes Berg2013-01-031-5/+10
| | | | | | | | | The special case in the function isn't really needed, instead make the suspend code a bit better and also easier to understand and move the warning into the driver op wrapper inline. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clean up association better in suspendJohannes Berg2013-01-031-3/+16
| | | | | | | | | | | | When suspending, bss_info_changed() is called to disable beacons, but managed mode interfaces are simply removed (bss_info_changed() is called with "no change" only). This can lead to problems. To fix this and copy the BSS configuration, clear it during suspend and restore it on resume. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clean up ieee80211_quiesceJohannes Berg2013-01-031-17/+19
| | | | | | | | | | | | | | | | It's a bit odd that there's a return value that only depends on the iftype, move that logic out of the function into the only caller that needs it. Also, since the quiescing could stop timers that trigger the sdata work, move the sdata work cancel into the function and after the actual quiesce. Finally, there's no need to call it on interfaces that are down, so don't. Change-Id: I1632d46d21ba3558ea713d035184f1939905f2f1 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix channel context suspend/reconfig handlingJohannes Berg2012-11-201-3/+41
| | | | | | | | | | | | | | | | | | | | | | Sujith reported warnings with suspend/resume due to channel contexts. When I looked into it, I realised that the code was completely broken as it unassigned the channel contexts when suspending, which actually means they are destroyed. Eliad Peller then pointed out that we also need to remove the channel contexts from the driver. When I looked into this, I also noticed that the code isn't handling the virtual monitor interface correctly (if it exists.) Fix this by calling just the driver methods (if they are implemented) instead of using the channel context management code. Also add reconfiguration for the virtual monitor interface. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add explicit AP/GO driver operationsJohannes Berg2012-10-261-0/+4
| | | | | | | | | | Depending on the driver, a lot of setup may be necessary to start operating as an AP, some of which may fail. Add an explicit AP start driver method to make such failures easier to handle, and add an AP stop driver method for symmetry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use channel contextsJohannes Berg2012-10-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Instead of operating on a single channel only, use the new channel context infrastructure in all mac80211 code. This enables drivers that want to use the new channel context infrastructure to use multiple channels, while nothing should change for all the other drivers that don't support it. Right now this disables both TX power settings and spatial multiplexing powersave. Both need to be re-enabled on a channel context basis. Additionally, when channel contexts are used drop the connection when channel switch is received rather than trying to handle it. This will have to be improved later. [With fixes from Eliad and Emmanuel incorporated] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix cleanup if driver suspend callback failsEyal Shapira2012-06-201-0/+10
| | | | | | | | | | | | In case the driver suspend callback fails, mac80211 is left with stopped queues which prevents any further traffic as well as all STAs are left marked with WLAN_STA_BLOCK_BA which will cause any further ADDBA requests to be declined. Fix it by undoing both before returning from __iee80211_suspend. Reported-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Clear wowlan flag when drv_suspend returns failurePontus Fuchs2012-06-061-0/+1
| | | | | | | | | | | | | | | | drv_resume can get called without a prior call to drv_suspend. Consider the following steps: 1. Suspend is started but driver's drv_suspend returns error. 2. Suspend is aborted. local->wowlan flag is left set. 3. Interface is removed. 4. Suspend again. This time open_count is 0 so drv_suspend is not called and local->wowlan not cleared. 5. On resume ieee80211_reconfig will call drv_resume since local->wowlan is set. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add explicit monitor interface if neededJohannes Berg2012-04-111-0/+4
| | | | | | | | | | | | | | | | | | | The queue mapping redesign that I'm planning to do will break pure injection unless we handle monitor interfaces explicitly. One possible option would be to have the driver tell mac80211 about monitor mode queues etc., but that would duplicate the API since we already need to have queue assignments handled per virtual interface. So in order to solve this, have a virtual monitor interface that is added whenever all active vifs are monitors. We could also use the state of one of the monitor interfaces, but managing that would be complicated, so allocate separate state. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use proper sub_if_data on suspend pathJakub Kicinski2012-02-271-1/+1
| | | | | | | | | Use interface data from sta instead of invalid pointer to list head in calls to drv_sta_state. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: implement sta_add/sta_remove in sta_stateJohannes Berg2012-02-061-2/+0
| | | | | | | | | | | | | | | Instead of maintaining separate sta_add/sta_remove callsites, implement it in sta_state when the driver has no sta_state implementation. The only behavioural change this should cause is in secure mesh mode: with this the station entries will only be created after the stations are set to AUTH. Given which drivers support mesh, this seems to not be a problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add sta_state callbackJohannes Berg2012-02-061-1/+9
| | | | | | | | | | | | | | | | | | | | | | (based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: simplify AP_VLAN handlingJohannes Berg2012-02-061-9/+2
| | | | | | | | | | | | | | Setting keys and updating TKIP keys must use the BSS sdata (not AP_VLAN), so we translate. Move the translation into driver-ops wrappers instead of having it inline in the code to simplify the normal code flow. The same can be done for sta_add/remove which already does the translation in the wrapper. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: verify virtual interfaces in driver APIJohannes Berg2011-11-091-1/+1
| | | | | | | | | | The driver is never informed about monitor or AP_VLAN interfaces, so whenever we pass those to it later this is a bug. Verify we don't as there are some cases where this could happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: optimise station flagsJohannes Berg2011-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | The flaglock in struct sta_info has long been something that I wanted to get rid of, this finally does the conversion to atomic bitops. The conversion itself is straight-forward in most places, a few things needed to change a bit since we can no longer use multiple bits at the same time. On x86-64, this is a fairly significant code size reduction: text data bss dec hex 427861 23648 1008 452517 6e7a5 before 425383 23648 976 450007 6ddd7 after Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: be more careful in suspend/resumeJohannes Berg2011-07-151-0/+3
| | | | | | | | | | | | | | | | | When suspending with all netdevs down, the device is stopped but we still call a number of driver callbacks that the driver might not expect. The same happens during resume, we might call a few callbacks without starting the driver. Fix this by checking open_count around more things and exiting quickly if it is 0. Also, while at this I noticed that the coverage class isn't reprogrammed after resume, so add that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow driver to impose WoWLAN restrictionsJohannes Berg2011-07-051-6/+10
| | | | | | | | | | | If the driver can't support WoWLAN in the current state, this patch allows it to return 1 from the suspend callback to do the normal deconfiguration instead of using suspend/resume calls. Note that if it does this, resume won't be called. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: quiesce vif before suspendingEliad Peller2011-06-201-16/+27
| | | | | | | | | | | | | | | | | | | | | | Cancel all relevant timers/works before suspending (wowlan). This patch handles the following warning: WARNING: at net/mac80211/util.c:565 queueing ieee80211 work while going to suspend Backtrace: [<bf07b598>] (ieee80211_can_queue_work+0x0/0x4c [mac80211]) [<bf07c28c>] (ieee80211_queue_work+0x0/0x30 [mac80211]) [<bf0690dc>] (ieee80211_sta_timer+0x0/0x3c [mac80211]) [<c00a3008>] (run_timer_softirq+0x0/0x220) [<c009e530>] (__do_softirq+0x0/0x130) [<c009e660>] (irq_exit+0x0/0xb4) [<c004c4a0>] (ipi_timer+0x0/0x4c) [<c0046350>] (do_local_timer+0x0/0x88) [<c00488ec>] (cpu_idle+0x0/0xe0) [<c05294e8>] (rest_init+0x0/0xe0) [<c0008958>] (start_kernel+0x0/0x314) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add basic support for WoWLANJohannes Berg2011-05-051-1/+12
| | | | | | | | | | | | | | This adds basic support for the new WoWLAN configuration in mac80211. The behaviour is completely offloaded to the driver though, with two new callbacks (suspend/resume). Options for the driver include a complete reconfiguration after wakeup, and exposing all the triggers it wants to support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: tear down BA sessions properly on suspendJohannes Berg2011-04-251-5/+11
| | | | | | | | | | | | | | | Currently, the code to tear down BA sessions will execute after queues are stopped, but attempt to send frames, so those frames will just get queued, which isn't intended. Move this code to before to tear down the sessions properly. Additionally, after stopping queues, flush the TX queues in the driver driver to make sure all the frames went out. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: assure we also cancel deferred scan requestStanislaw Gruszka2010-10-061-2/+1
| | | | | | | | | | | | | | | | | | | | | This is partial revert and fix for commit 85f72bc839705294b32b6c16b491c0422f0a71b3 "mac80211: only cancel software-based scans on suspend" When cfg80211 request the scan and mac80211 perform some management work, we defer the scan request. We do not canceling such requests when calling ieee80211_scan_cancel(), because of SCAN_SW_SCANNING bit check just before the call. So fix that problem. Another problem, which commit 85f72bc839705294b32b6c16b491c0422f0a71b3 tries to solve, is we can not cancel HW scan. Hence patch make ieee80211_scan_cancel() ignore HW scan (see code comments). Keeping local->mtx lock assures that the deferred scan will not become "working" HW scan. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: avoid transmitting delBA to old APJohannes Berg2010-10-061-1/+1
| | | | | | | | | | | | | | | | | When roaming while we have active BA session, we can end up transmitting delBA frames to the old AP while we're already on the new AP's channel, which can cause warnings. Simply avoid sending those frames, but still tear down the internal session state, since they are not really necessary anyway as we will implicitly disassociate when sending the association to the new AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-20 15:28:52 +0000