diff options
| author | Paul Fertser <fercerpav@gmail.com> | 2015-01-23 11:38:31 +0300 |
|---|---|---|
| committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2015-02-11 22:19:37 +0000 |
| commit | 30f802493d1237eeef21282d4224ed89d8a4d480 (patch) | |
| tree | d7a98671bbd2581393a3766b67cc32966212f489 /doc | |
| parent | a35712a85c420e24a9c7e9a5eea4fc6d3aff6342 (diff) | |
| download | openocd-30f802493d1237eeef21282d4224ed89d8a4d480.tar.gz openocd-30f802493d1237eeef21282d4224ed89d8a4d480.tar.xz | |
flash/startup: extend "program" command to accept "exit"
This optional argument tells OpenOCD to exit after finishing (either
succesfully, or with an error) the programming sequence. Without it
OpenOCD stays running.
Change-Id: I6ecaf33ff985eea9a9cd02ff644a74403ae3e1e5
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2492
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index ce681a38..e884be47 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -4922,7 +4922,7 @@ comamnd or the flash driver then it defaults to 0xff. @end deffn @anchor{program} -@deffn Command {program} filename [verify] [reset] [offset] +@deffn Command {program} filename [verify] [reset] [exit] [offset] This is a helper script that simplifies using OpenOCD as a standalone programmer. The only required parameter is @option{filename}, the others are optional. @xref{Flash Programming}. @@ -5928,7 +5928,7 @@ Programming can be acheived by either using GDB @ref{programmingusinggdb,,Progra or using the cmds given in @ref{flashprogrammingcommands,,Flash Programming Commands}. @*To simplify using the flash cmds directly a jimtcl script is available that handles the programming and verify stage. -OpenOCD will program/verify/reset the target and shutdown. +OpenOCD will program/verify/reset the target and optionally shutdown. The script is executed as follows and by default the following actions will be peformed. @enumerate @@ -5937,7 +5937,7 @@ The script is executed as follows and by default the following actions will be p @item @code{flash write_image} is called to erase and write any flash using the filename given. @item @code{verify_image} is called if @option{verify} parameter is given. @item @code{reset run} is called if @option{reset} parameter is given. -@item OpenOCD is shutdown. +@item OpenOCD is shutdown if @option{exit} parameter is given. @end enumerate An example of usage is given below. @xref{program}. @@ -5946,11 +5946,11 @@ An example of usage is given below. @xref{program}. # program and verify using elf/hex/s19. verify and reset # are optional parameters openocd -f board/stm32f3discovery.cfg \ - -c "program filename.elf verify reset" + -c "program filename.elf verify reset exit" # binary files need the flash address passing openocd -f board/stm32f3discovery.cfg \ - -c "program filename.bin 0x08000000" + -c "program filename.bin exit 0x08000000" @end example @node NAND Flash Commands |