summaryrefslogtreecommitdiffstats
path: root/README
Commit message (Collapse)AuthorAgeFilesLines
* docs: update OpenOCD url's to openocd.org domainSpencer Oliver2015-04-161-2/+2
| | | | | | | Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2698 Tested-by: jenkins
* README, doc: add mrvlqspi flash driver informationPaul Fertser2015-02-121-4/+4
| | | | | | | Change-Id: I7a270cdaf3d9119aa75285a8d1e063c2fe2a31b7 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2510 Tested-by: jenkins
* doc, README: mention all the variants supported by lpc2000 driverPaul Fertser2015-02-121-4/+4
| | | | | | | Change-Id: I66f9a201426a68fc1314ab7f02b27e36dcab33ba Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2508 Tested-by: jenkins
* sim3x: new flash driver for Silabs SiM3 microcontroller familyAndreas Bomholtz2015-02-111-3/+4
| | | | | | | | | | | | | | | | | | | | This is a new driver for Silicon Laboratories SiM3 microcontroller family, based on the work of Ladislav Bábel. The driver will try to detect the type of MCU from the device id register, and if this fails it will use the flash size from the flash bank command. Driver added to the documentation and to the README. TCL script added. Tests: * Hardware: SiM3C166 (pre-production) and SiM3U167 * Binary: 4kb, 197kb, 256kb * Flash protect not tested Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2078 Tested-by: jenkins
* README: mention "transport select" in quickstart sectionPaul Fertser2015-02-111-1/+5
| | | | | | | | | Change-Id: I027635c3c8632efcf58cf979b9cb2f99e9e7f046 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2512 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek2015-02-111-1/+1
| | | | | | | | | | | | New NOR flash driver was derived from stm32lx. Procedure ocd_process_reset_inner is overriden in psoc4.cfg to handle reset halt and system ROM peculiarities. Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2282 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/interface/ftdi: add Digilent JTAG-SMT2 configPaul Fertser2014-03-171-6/+6
| | | | | | | | | | Tested on ZedBoard by Tim Sander. Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2029 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* Rename and sort udev rules fileAndreas Fritiofson2014-03-071-2/+2
| | | | | | | | | | Also add missing entries for JTAG-lock-pick Tiny 2, Xverve Signalyzer LITE and default FTDI VID:PIDs. Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1969 Tested-by: jenkins
* nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov2014-02-241-1/+1
| | | | | | | | | | | Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* quark_x10xx: add new target quark_x10xxAdrian Burns2014-02-111-1/+1
| | | | | | | | | | | | Intel Quark X10xx SoC debug support added Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC Generic x86 32-bit code is in x86_32_common.c/h Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368 Signed-off-by: adrian.burns@intel.com Reviewed-on: http://openocd.zylin.com/1829 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* Add CMSIS-DAP information to the READMEs.Paul Fertser2014-01-201-4/+6
| | | | | | | | | Change-Id: I8c87d559adf07b0f0702fe9d388f26bf046bcb8b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1880 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* Require Autoconf >= 2.64Paul Fertser2013-09-261-1/+1
| | | | | | | | | | | m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of Apr 2009. Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984 Reported-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1656 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* README: add missing adapters and flash drivers, mention profilingPaul Fertser2013-09-161-10/+11
| | | | | | | | | | | This updates README with all the "keywords" added since the initial upstream submission (and finally fixes the typo in the beginning). Change-Id: Ia071267246fe6afc19fc0bfcda83c4778e7ff5b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1624 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* libusb: require pkg-config supportPaul Fertser2013-09-131-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | An alternative approach to show how much cleaner the pure pkg-config way is. This changes the discovery procedures for libusb-1.0 and libusb-0.1, making them depend on pkg-config being properly installed and configured, including the necessary build host configuration for the cross-builds (see http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html) It should make it possible to compile OpenOCD without changes and extra effort on GNU/Linux, FreeBSD users would need to supply a .pc file for their libusb implementation or add LIBUSB1_LIBS and LIBUSB1_CFLAGS to the configure environment. Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1467 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
* README* refactoringPaul Fertser2013-09-131-284/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an attempt to bring the README files in line with the current status of the OpenOCD development. - remove some obsolete information and duplicated instructions - reword some statements - restructure in a way more appealing to a regular user - add a supported hardware list to allow a potential user to determine if his/her usecase is covered by a freetext keyword search through the document - Add OSX notes (courtesy GrizzlyAdams and inca) Since most ftdi-based adapters are now covered by the ftdi driver, I think it's ok to remove some of the libftdi/ftd2xx instructions, the few users who still need them should refer to upstream docs instead. I'm not sure if README.Windows should come with the DOS line endings, but i'd expect many windows users to use their silly notepad to view it, and notepad ignores LF apparently. (Decided to use LF anyway.) I understand discussing and reviewing such a massive README change is a somewhat demanding task but I feel it's a necessity to move forward maintaining proper documentation. Change-Id: Idfde3014c72dd5c32ad292ee1ab205322e51a138 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1503 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
* configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rulesPaul Fertser2013-07-151-7/+2
| | | | | | | | | | | | There're strong arguments against using this macro (mostly regarding build consistency), so remove it altogether. Change-Id: I90c8e9a86a24571019366435bd868a6799a09c45 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1476 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* configure: remove --enable-libusb0 option, rework libusb selectionPaul Fertser2013-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | This makes libusb handling more consistent: if any driver requires libusb, first check for libusb-1 availability, if not found and libusb0 is ok for this case, try libusb0. A user-visible bug fixed by this is that when a user was selecting a driver that required libusb-1 but was lacking the necessary dev files or libraries, configure didn't complain (but the build was failing of course). --enable-stlink doesn't really require libusb-1 but since it's using the same automake symbol HLAADAPTER, ti_icdi is getting built too which needs libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway, leave that as is. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82 Reviewed-on: http://openocd.zylin.com/1434 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* Improve clone command in READMEFreddie Chopin2013-04-201-1/+1
| | | | | | | | | | Without the explicit dir at the end the repository will be cloned to "code". Change-Id: Icd8b55b4ba74f23b214c3844e2fb785377768119 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1349 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
* docs: update incorrect urlsSpencer Oliver2013-03-281-3/+2
| | | | | | | | | | These were missed when git was moved to the new SF platform during Nov 2012. Change-Id: I7b4ae9dea010d95f9bf4c26841b5b724f41768be Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1248 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
* icdi: add TI icdi interfaceSpencer Oliver2012-12-231-0/+2
| | | | | | | | | | This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
* readme: update missing configure argsSpencer Oliver2012-10-071-0/+4
| | | | | | | | Change-Id: I495a4557f161290f8f99788de27958f7dc08d6f6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/900 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
* docs: update interface support in READMESpencer Oliver2012-05-291-17/+49
| | | | | | | | Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/682 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
* ecosboard: delete bit-rotted eCos codeØyvind Harboe2012-03-131-1/+0
| | | | | | | | Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
* docs: update project url'sSpencer Oliver2011-10-121-1/+1
| | | | | Change-Id: I54fc3aff722ed25143aad85e58d19b72fcecbba0 Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* replace berlios url's with sourceforge url'sSpencer Oliver2011-10-111-3/+3
| | | | | Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Add description for configure argument "--enable-ulink" to README fileMartin Schmölzer2011-06-261-0/+2
|
* httpd: retire this serverØyvind Harboe2010-11-151-2/+0
| | | | | | | | | | this never panned out and there are enough mistakes in the code that probably nobody used this. Use the tcl server and implement a standalone http app instead works fine. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* README: update libftdi versionDavid Brownell2010-03-051-1/+1
| | | | | | | The FT2232H really wants libftdi 0.17 or newer; some notable bugs got fixed in that version. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide mentions OS-specific installationDavid Brownell2010-02-211-2/+2
| | | | | | | | | | Specifically the Linux issue of needing "udev" rules, and MS-Windows needing driver configuration. Also, update the existing udev note to use the correct name of that rules file in the source tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix typos in documentationUwe Hermann2009-11-261-2/+2
| | | | | | Fixes some minor typos in the top-level documentation files. Signed-off-by: Zachary T Welch <zw@superlucidity.net>
* allow documentation to be configuredZachary T Welch2009-11-171-0/+3
| | | | | | | Add --disable-doxygen-html and --enable-doxygen-pdf options to the configure script, allowing user to change the defaults. These update the proess of munging the Doxygen configuration file to use the settings thusly provided. Add options in README.
* Houston, we have Mirror!David Brownell2009-10-071-0/+6
|
* Change most in-tree references from SVN to GIT.dbrownell2009-10-081-22/+29
| | | | | | | | | Also, talk about "mainline" not "trunk". The release.txt and release.sh files need more updates. git-svn-id: svn://svn.berlios.de/openocd/trunk@2825 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - remove enable-ft2232-highspeed configure option, high speed ftdi support ↵ntfreak2009-08-201-4/+0
| | | | | | | | is now detected during the configure stage - warning now issued if high speed ftdi device found and openocd was built using an old driver git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Jonas Horberg [jhorberg@sauer-danfoss.com]ntfreak2009-08-181-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html 1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H since version 0.16 2. A speed value of 0 is used as a RTCK request indicator. This clashes with the valid clock division value 0 that provide the highest fixed clock frequency. 3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) when RTCK is activated. It should return 0. 4. The ft2232_khz function return ERROR_OK when RTCK is requested even for devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers can detect this and try to fallback to a fixed frequency. 5. FT2232H/FT4232H have a backward compatibility function that divide the clock by 5 to get the same frequency range as FT2232D. There is no code that disable this functionality. I can not find anything about if this is enabled or disabled by default. I think it is safest to actively disable it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> mention udev, and correct D2XX speed ↵oharboe2009-07-141-1/+10
| | | | | | mentions git-svn-id: svn://svn.berlios.de/openocd/trunk@2526 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Split Windows README instructions into new file, with a few fixes.zwelch2009-07-141-87/+5
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2515 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> document my experimentoharboe2009-07-121-1/+67
| | | | | | | with MinGW cross build. git-svn-id: svn://svn.berlios.de/openocd/trunk@2512 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add section to provide some documentation for cross-compiling.zwelch2009-07-081-0/+23
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2502 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* fixed a small typo in howto create doxygen docsoharboe2009-07-071-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2489 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove --enable-release option; if guess-rev.sh is missing, it is a release.zwelch2009-07-021-5/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2456 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-07-021-10/+10
| | | | | | | | | | More minor improvements to README to help polish the 0.2.0 release: - Add note about Ubuntu 8.04 (in lieu of starting a README.Linux file). - Fix introductory paragraph to Bulding OpenOCD - Remove some vestigial texinfo markup. git-svn-id: svn://svn.berlios.de/openocd/trunk@2448 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add comments to README about compiler and library dependencies.zwelch2009-07-011-1/+11
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2441 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Provide some useful information in README file, rather than punting.zwelch2009-06-301-1/+388
| | | | | | | | | | | | | | Add some text to introduce the project to new users. Move packaging, configuration, and compilation of OpenOCD out of the User's Guide and into README, where it can be used by users before configuring and compiling the documentation. Improve notes about required Subversion repository build steps. Add reference to the standard GNU INSTALL file. git-svn-id: svn://svn.berlios.de/openocd/trunk@2436 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* commit test from Duaneduane2009-06-191-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2289 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Test of commit email from duaneduane2008-12-061-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1219 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix typo'sntfreak2008-09-221-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@991 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* openocd.texi is the authortative source of OpenOCD documentationoharboe2008-09-211-171/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@989 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Added coding style to READMEdrath2008-03-021-1/+31
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Uwe Hermann: Updated version which applies cleanly after the recent ↵oharboe2008-02-291-1/+7
| | | | | | whitespace fixes. git-svn-id: svn://svn.berlios.de/openocd/trunk@397 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 20:15:28 +0000