v7a: barebox: version bump v2022.09.0 → v2023.02.1

Our patches for optionally working around flaky SD-Card detect are now
upstream, so let's update to the newest release and drop them from our
side. Config is what resulted from oldconfig with the exception of:

  - CONFIG_DRIVER_NET_BCMGENET, which is now enabled to give resulting
    barebox-raspberry-pi.img Ethernet support when running on the rpi 4-b.

  - CONFIG_CMD_FCB, which adds a useful fcb command for debugging
    boot from NAND on i.MX SoCs.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.pengutronix.de/20230307114541.3179101-1-a.fatoum@pengutronix.de
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

19 files changed, 90 insertions, 200 deletions

diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index c296fef..010b1b9 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -88,7 +88,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_FILETYPE=y
@@ -369,6 +369,7 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_OMAP=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 6f54bea..647d716 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -93,7 +93,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -340,6 +340,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -447,6 +448,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -494,6 +496,7 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
+# CONFIG_DRIVER_NET_BCMGENET is not set
 CONFIG_DRIVER_NET_CPSW=y
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
@@ -689,6 +692,7 @@ CONFIG_CLOCKSOURCE_TI_DM=y
 # CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -755,6 +759,7 @@ CONFIG_GPIO_OMAP=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -857,6 +862,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index 936bb66..20ab680 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 # CONFIG_32BIT is undefined
 # CONFIG_64BIT is undefined
 # CONFIG_AM33XX_NET_BOOT is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index a0130d2..78e8e85 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -61,6 +61,7 @@ CONFIG_AT91_MCI_PBL=y
 CONFIG_AT91SAM9_SMC=y
 CONFIG_HAVE_AT91SAM9_RST=y
 CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5_MULTI=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_ARCH_TEXT_BASE=0x23f00000
 
@@ -75,6 +76,7 @@ CONFIG_AT91_MULTI_BOARDS=y
 # CONFIG_MACH_SAMA5D3_XPLAINED is not set
 CONFIG_MACH_SAMA5D27_SOM1=y
 CONFIG_MACH_SAMA5D27_GIANTBOARD=y
+# CONFIG_MACH_SAMA5D4_WIFX is not set
 
 #
 # AT91 Board Options
@@ -100,7 +102,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -237,6 +239,7 @@ CONFIG_DEFAULT_LOGLEVEL=7
 # CONFIG_DEBUG_LL is not set
 CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
 # CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
 # CONFIG_DEBUG_PROBES is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
@@ -339,6 +342,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -441,6 +445,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -488,6 +493,7 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
+# CONFIG_DRIVER_NET_BCMGENET is not set
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 # CONFIG_DRIVER_NET_FSL_FMAN is not set
@@ -651,6 +657,7 @@ CONFIG_MFD_SYSCON=y
 # CONFIG_MFD_RN568PMIC is not set
 CONFIG_MFD_ATMEL_FLEXCOM=y
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -763,6 +771,7 @@ CONFIG_REGULATOR_FIXED=y
 #
 # Memory controller drivers
 #
+# CONFIG_ATMEL_EBI is not set
 # end of Memory controller drivers
 
 #
@@ -812,6 +821,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index c6e0f20..a08422f 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 # CONFIG_32BIT is undefined
 # CONFIG_64BIT is undefined
 CONFIG_ARCH_AT91=y
@@ -11,6 +11,7 @@ CONFIG_ARCH_TEXT_BASE=0x23f00000
 CONFIG_AT91SAM9_SMC=y
 CONFIG_AT91_MCI_PBL=y
 CONFIG_AT91_MULTI_BOARDS=y
+# CONFIG_ATMEL_EBI is not set
 # CONFIG_BOARD_ARM_GENERIC_DT is not set
 # CONFIG_BOARD_GENERIC_DT is undefined
 CONFIG_BOOTM_OFTREE_UIMAGE=y
@@ -28,6 +29,7 @@ CONFIG_COMPILE_LOGLEVEL=6
 # CONFIG_CPU_SUPPORTS_32BIT_KERNEL is undefined
 # CONFIG_CPU_SUPPORTS_64BIT_KERNEL is undefined
 CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
+# CONFIG_DEBUG_PBL is not set
 CONFIG_DEFAULT_LOGLEVEL=7
 # CONFIG_DRIVER_NET_ARC_EMAC is undefined
 CONFIG_DRIVER_NET_MACB=y
@@ -75,6 +77,7 @@ CONFIG_IMD_TARGET=y
 CONFIG_MACH_SAMA5D27_GIANTBOARD=y
 CONFIG_MACH_SAMA5D27_SOM1=y
 # CONFIG_MACH_SAMA5D3_XPLAINED is not set
+# CONFIG_MACH_SAMA5D4_WIFX is not set
 # CONFIG_MACH_SKOV_ARM9CPU is not set
 CONFIG_MCI_ATMEL=y
 CONFIG_MCI_ATMEL_SDHCI=y
@@ -106,6 +109,7 @@ CONFIG_REGULATOR_FIXED=y
 # CONFIG_SERIAL_AMBA_PL011 is undefined
 CONFIG_SOC_SAMA5=y
 CONFIG_SOC_SAMA5D2=y
+CONFIG_SOC_SAMA5_MULTI=y
 CONFIG_SPI_ATMEL_QUADSPI=y
 # CONFIG_SPI_CADENCE_QUADSPI is not set
 CONFIG_SPI_MEM=y
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index d62cd2b..f6a1003 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -77,6 +77,7 @@ CONFIG_IMX_MULTI_BOARDS=y
 # CONFIG_MACH_PHYTEC_SOM_IMX6 is not set
 # CONFIG_MACH_PROTONIC_IMX6 is not set
 # CONFIG_MACH_PROTONIC_IMX8M is not set
+# CONFIG_MACH_INNOCOMM_WB15 is not set
 # CONFIG_MACH_KONTRON_SAMX6I is not set
 # CONFIG_MACH_DFI_FS700_M60 is not set
 # CONFIG_MACH_GUF_SANTARO is not set
@@ -119,6 +120,7 @@ CONFIG_MACH_UDOO_NEO=y
 # CONFIG_MACH_NXP_IMX8MP_EVK is not set
 # CONFIG_MACH_NXP_IMX8MQ_EVK is not set
 # CONFIG_MACH_PHYTEC_SOM_IMX8MQ is not set
+# CONFIG_MACH_TQ_MBA8MPXL is not set
 # CONFIG_MACH_GRINN_LITEBOARD is not set
 # CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
 # CONFIG_MACH_WEBASTO_CCBV2 is not set
@@ -161,7 +163,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -358,6 +360,7 @@ CONFIG_CMD_MMC_EXTCSD=y
 # CONFIG_CMD_POLLER is not set
 CONFIG_CMD_BTHREAD=y
 # CONFIG_CMD_SLICE is not set
+CONFIG_CMD_FCB=y
 # end of Information
 
 #
@@ -414,6 +417,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -524,6 +528,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -573,6 +578,7 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
+# CONFIG_DRIVER_NET_BCMGENET is not set
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 CONFIG_DRIVER_NET_FEC_IMX=y
@@ -808,6 +814,7 @@ CONFIG_MFD_SYSCON=y
 # CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -879,6 +886,7 @@ CONFIG_GPIO_IMX=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -998,6 +1006,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 9efdf8c..0ff150f 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 # CONFIG_32BIT is undefined
 # CONFIG_64BIT is undefined
 # CONFIG_ARCH_BCM283X is not set
@@ -26,6 +26,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
 # CONFIG_CLOCKSOURCE_BCM283X is undefined
 CONFIG_CLOCKSOURCE_IMX_GPT=y
 # CONFIG_CMD_FBTEST is not set
+CONFIG_CMD_FCB=y
 # CONFIG_CMD_KEYSTORE is not set
 CONFIG_CMD_MMC_EXTCSD=y
 CONFIG_CMD_NAND=y
@@ -120,6 +121,7 @@ CONFIG_MACH_EMBEST_RIOTBOARD=y
 # CONFIG_MACH_GUF_SANTARO is not set
 # CONFIG_MACH_GUF_VINCELL is not set
 # CONFIG_MACH_GW_VENTANA is not set
+# CONFIG_MACH_INNOCOMM_WB15 is not set
 # CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR is not set
 # CONFIG_MACH_KINDLE_MX50 is not set
 # CONFIG_MACH_KONTRON_SAMX6I is not set
@@ -156,6 +158,7 @@ CONFIG_MACH_SABRELITE=y
 # CONFIG_MACH_TQMA53 is not set
 # CONFIG_MACH_TQMA6UL is not set
 # CONFIG_MACH_TQMA6X is not set
+# CONFIG_MACH_TQ_MBA8MPXL is not set
 # CONFIG_MACH_TX25 is not set
 # CONFIG_MACH_TX53 is not set
 # CONFIG_MACH_TX6X is not set
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 4788ff1..96b416f 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -92,7 +92,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -329,6 +329,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -433,6 +434,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -481,6 +483,7 @@ CONFIG_PHYLIB=y
 # Network drivers
 #
 # CONFIG_DRIVER_NET_ARC_EMAC is not set
+CONFIG_DRIVER_NET_BCMGENET=y
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 # CONFIG_DRIVER_NET_FSL_FMAN is not set
@@ -656,6 +659,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
 # CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -721,6 +725,7 @@ CONFIG_GPIO_RASPBERRYPI_EXP=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -826,6 +831,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 534b657..852c271 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,7 +1,8 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 CONFIG_ARM_ASM_UNIFIED=y
 # CONFIG_CMD_NVMEM is not set
 # CONFIG_CMD_USBGADGET is undefined
+CONFIG_DRIVER_NET_BCMGENET=y
 CONFIG_DRIVER_SERIAL_NS16550=y
 # CONFIG_EEPROM_93XX46 is not set
 # CONFIG_FASTBOOT_BASE is undefined
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
index cf2348e..8a6f6d9 100644
--- a/configs/platform-v7a/barebox-stm32mp.config
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -84,7 +84,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -230,6 +230,7 @@ CONFIG_COMPILE_LOGLEVEL=6
 CONFIG_DEFAULT_LOGLEVEL=7
 # CONFIG_DEBUG_LL is not set
 # CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
 # CONFIG_DEBUG_PROBES is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
@@ -331,6 +332,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -434,6 +436,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -453,6 +456,8 @@ CONFIG_NET_DHCP=y
 #
 # Drivers
 #
+CONFIG_REGMAP_FORMATTED=y
+CONFIG_REGMAP_I2C=y
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -482,6 +487,7 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
+# CONFIG_DRIVER_NET_BCMGENET is not set
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
 CONFIG_DRIVER_NET_DESIGNWARE_STM32=y
@@ -635,6 +641,7 @@ CONFIG_MFD_STPMIC1=y
 CONFIG_MFD_STM32_TIMERS=y
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -700,6 +707,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -814,6 +822,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 60037f8..4295076 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 # CONFIG_32BIT is undefined
 # CONFIG_64BIT is undefined
 # CONFIG_ARCH_BCM283X is not set
@@ -36,6 +36,7 @@ CONFIG_CONSOLE_ACTIVATE_NONE=y
 # CONFIG_CPU_SUPPORTS_32BIT_KERNEL is undefined
 # CONFIG_CPU_SUPPORTS_64BIT_KERNEL is undefined
 CONFIG_CRC8=y
+# CONFIG_DEBUG_PBL is not set
 CONFIG_DEFAULT_LOGLEVEL=7
 # CONFIG_DRIVER_CFI is undefined
 # CONFIG_DRIVER_NET_ARC_EMAC is undefined
@@ -124,6 +125,8 @@ CONFIG_PRINTF_UUID=y
 CONFIG_PROMPT="barebox:"
 CONFIG_PWM=y
 CONFIG_PWM_STM32=y
+CONFIG_REGMAP_FORMATTED=y
+CONFIG_REGMAP_I2C=y
 # CONFIG_REGULATOR_ANATOP is not set
 # CONFIG_REGULATOR_BCM283X is undefined
 CONFIG_REGULATOR_FIXED=y
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 9503d59..80d446c 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -72,7 +72,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
 CONFIG_FILETYPE=y
@@ -216,6 +216,7 @@ CONFIG_COMPILE_LOGLEVEL=7
 CONFIG_DEFAULT_LOGLEVEL=6
 # CONFIG_DEBUG_LL is not set
 # CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
 # CONFIG_DEBUG_PROBES is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
@@ -316,6 +317,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -419,6 +421,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -465,6 +468,7 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
+# CONFIG_DRIVER_NET_BCMGENET is not set
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 # CONFIG_DRIVER_NET_FSL_FMAN is not set
@@ -648,6 +652,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
 # CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -779,6 +784,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index c9c2cc4..abbea1a 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-44749ac3167836cbc7b473f78c4e9fea
+68457081af06bd8377bc38ef02c7d415
 # CONFIG_32BIT is undefined
 # CONFIG_64BIT is undefined
 CONFIG_AMBA_SP804=y
@@ -16,6 +16,7 @@ CONFIG_CONSOLE_ACTIVATE_ALL=y
 # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
 # CONFIG_CPU_SUPPORTS_32BIT_KERNEL is undefined
 # CONFIG_CPU_SUPPORTS_64BIT_KERNEL is undefined
+# CONFIG_DEBUG_PBL is not set
 CONFIG_DRIVER_CFI=y
 CONFIG_DRIVER_CFI_AMD=y
 CONFIG_DRIVER_CFI_BANK_WIDTH_1=y
@@ -33,6 +34,7 @@ CONFIG_DRIVER_NET_SMC911X=y
 # CONFIG_GPIO_74XX_MMIO is undefined
 # CONFIG_GPIO_DESIGNWARE is undefined
 # CONFIG_GPIO_GENERIC_PLATFORM is undefined
+# CONFIG_GPIO_LATCH is undefined
 # CONFIG_GPIO_PCA953X is undefined
 # CONFIG_GPIO_PCF857X is undefined
 # CONFIG_GPIO_PL061 is undefined
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index e0ea318..2e1d844 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.09.0 Configuration
+# Barebox/arm 2023.02.1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -91,7 +91,7 @@ CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
 CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -337,6 +337,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
 CONFIG_CMD_PWD=y
@@ -442,6 +443,7 @@ CONFIG_CMD_OF_FIXUP_STATUS=y
 CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
 CONFIG_CMD_STATE=y
 # CONFIG_CMD_DHRYSTONE is not set
 # CONFIG_CMD_SPD_DECODE is not set
@@ -490,6 +492,7 @@ CONFIG_PHYLIB=y
 # Network drivers
 #
 # CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_BCMGENET is not set
 # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 # CONFIG_DRIVER_NET_FSL_FMAN is not set
@@ -673,6 +676,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
 # CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
 # CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
 # end of Multifunction device drivers
 
 #
@@ -738,6 +742,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_DESIGNWARE is not set
 # CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
 # end of GPIO
 
 # CONFIG_W1 is not set
@@ -837,6 +842,7 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_RAMFS=y
 CONFIG_FS_DEVFS=y
 CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
diff --git a/configs/platform-v7a/patches/barebox-2022.09.0/0001-mci-core-act-upon-broken-cd-device-tree-property.patch b/configs/platform-v7a/patches/barebox-2022.09.0/0001-mci-core-act-upon-broken-cd-device-tree-property.patch
deleted file mode 100644
index 7360637..0000000
--- a/configs/platform-v7a/patches/barebox-2022.09.0/0001-mci-core-act-upon-broken-cd-device-tree-property.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1d41bcf91e00a2e590497c266d5171232f30428c Mon Sep 17 00:00:00 2001
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Tue, 6 Sep 2022 20:10:14 +0200
-Subject: [PATCH 1/3] mci: core: act upon broken-cd device tree property
-
-We didn't care much for broken-cd so far, still we have some drivers
-implementing the card_present callback, which we should ignore when
-card-detect is marked broken.
-
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
----
- drivers/mci/mci-core.c | 12 ++++++++----
- include/mci.h          |  1 +
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
-index b8f71e15986e..5b1aa8dbed87 100644
---- a/drivers/mci/mci-core.c
-+++ b/drivers/mci/mci-core.c
-@@ -1750,10 +1750,13 @@ static int mci_card_probe(struct mci *mci)
- 	int i, rc, disknum, ret;
- 	bool has_bootpart = false;
- 
--	if (host->card_present && !host->card_present(host) &&
--	    !host->non_removable) {
--		dev_err(&mci->dev, "no card inserted\n");
--		return -ENODEV;
-+	if (host->card_present && !host->card_present(host) && !host->non_removable) {
-+		if (!host->broken_cd) {
-+			dev_err(&mci->dev, "no card inserted\n");
-+			return -ENODEV;
-+		}
-+
-+		dev_info(&mci->dev, "no card inserted (ignoring)\n");
- 	}
- 
- 	ret = regulator_enable(host->supply);
-@@ -2033,6 +2036,7 @@ void mci_of_parse_node(struct mci_host *host,
- 		}
- 	}
- 
-+	host->broken_cd = of_property_read_bool(np, "broken-cd");
- 	host->non_removable = of_property_read_bool(np, "non-removable");
- 	host->no_sd = of_property_read_bool(np, "no-sd");
- 	host->disable_wp = of_property_read_bool(np, "disable-wp");
-diff --git a/include/mci.h b/include/mci.h
-index 2098b4fbf084..d949310fac30 100644
---- a/include/mci.h
-+++ b/include/mci.h
-@@ -404,6 +404,7 @@ struct mci_host {
- 	unsigned max_req_size;
- 	unsigned dsr_val;	/**< optional dsr value */
- 	int use_dsr;		/**< optional dsr usage flag */
-+	int broken_cd;		/**< card detect is broken */
- 	bool non_removable;	/**< device is non removable */
- 	bool no_sd;		/**< do not send SD commands during initialization */
- 	bool disable_wp;	/**< ignore write-protect detection logic */
--- 
-2.30.2
-
diff --git a/configs/platform-v7a/patches/barebox-2022.09.0/0002-mci-core-add-broken_cd-device-parameter.patch b/configs/platform-v7a/patches/barebox-2022.09.0/0002-mci-core-add-broken_cd-device-parameter.patch
deleted file mode 100644
index b14c160..0000000
--- a/configs/platform-v7a/patches/barebox-2022.09.0/0002-mci-core-add-broken_cd-device-parameter.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 8d66a16dfd6b5c7e0d39e90954af32667e480074 Mon Sep 17 00:00:00 2001
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Tue, 6 Sep 2022 20:10:37 +0200
-Subject: [PATCH 2/3] mci: core: add broken_cd device parameter
-
-Sometimes a broken card-detect is not a general issue affecting all
-boards, but only a given board. Allow setting broken_cd for such boards
-via a device parameter.
-
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
----
- drivers/mci/mci-core.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
-index 5b1aa8dbed87..5101ac1d8298 100644
---- a/drivers/mci/mci-core.c
-+++ b/drivers/mci/mci-core.c
-@@ -1919,7 +1919,7 @@ int mci_register(struct mci_host *host)
- {
- 	struct mci *mci;
- 	struct device_d *hw_dev;
--	struct param_d *param_probe;
-+	struct param_d *param_probe, *param_broken_cd;
- 	int ret;
- 
- 	mci = xzalloc(sizeof(*mci));
-@@ -1963,6 +1963,15 @@ int mci_register(struct mci_host *host)
- 		goto err_unregister;
- 	}
- 
-+	param_broken_cd = dev_add_param_bool(&mci->dev, "broken_cd",
-+					     NULL, NULL, &host->broken_cd, mci);
-+
-+	if (IS_ERR(param_broken_cd) && PTR_ERR(param_broken_cd) != -ENOSYS) {
-+		ret = PTR_ERR(param_broken_cd);
-+		dev_dbg(&mci->dev, "Failed to add 'broken_cd' parameter to the MCI device\n");
-+		goto err_unregister;
-+	}
-+
- 	if (IS_ENABLED(CONFIG_MCI_INFO))
- 		mci->dev.info = mci_info;
- 
--- 
-2.30.2
-
diff --git a/configs/platform-v7a/patches/barebox-2022.09.0/0003-mci-core-fixup-broken-cd-information-into-kernel-DT.patch b/configs/platform-v7a/patches/barebox-2022.09.0/0003-mci-core-fixup-broken-cd-information-into-kernel-DT.patch
deleted file mode 100644
index 8f2c776..0000000
--- a/configs/platform-v7a/patches/barebox-2022.09.0/0003-mci-core-fixup-broken-cd-information-into-kernel-DT.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 16931f8ef3bc2a5ecce5ae77c33e2b5611ac8d98 Mon Sep 17 00:00:00 2001
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Mon, 25 Jul 2022 13:58:56 +0200
-Subject: [PATCH 3/3] mci: core: fixup broken-cd information into kernel DT
-
-In remote labs co-located with other hardware, we've observed card
-detect levers of different boards to sporadically fail to detect
-the card, e.g. because the cable on the usbsdmux was yanked around
-by accident. When this happens, barebox usually boots up normally as
-the card detect is ignored and then Linux waits indefinitely for
-the card-detect to turn active. We already maintain a broken_cd flag
-for each card. Use this to fixup the kernel DT appropriately.
-
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
----
- drivers/mci/mci-core.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
-index 5101ac1d8298..92dbdaf469fd 100644
---- a/drivers/mci/mci-core.c
-+++ b/drivers/mci/mci-core.c
-@@ -1739,6 +1739,31 @@ static int mci_register_partition(struct mci_part *part)
- 	return 0;
- }
- 
-+static int of_broken_cd_fixup(struct device_node *root, void *ctx)
-+{
-+	struct mci_host *host = ctx;
-+	struct device_d *hw_dev = host->hw_dev;
-+	struct device_node *np;
-+	char *name;
-+
-+	if (!host->broken_cd)
-+		return 0;
-+
-+	name = of_get_reproducible_name(hw_dev->device_node);
-+	np = of_find_node_by_reproducible_name(root, name);
-+	free(name);
-+	if (!np) {
-+		dev_warn(hw_dev, "Cannot find nodepath %s, cannot fixup\n",
-+			 hw_dev->device_node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	of_property_write_bool(np, "cd-gpios", false);
-+	of_property_write_bool(np, "broken-cd", true);
-+
-+	return 0;
-+}
-+
- /**
-  * Probe an MCI card at the given host interface
-  * @param mci MCI device instance
-@@ -1979,6 +2004,9 @@ int mci_register(struct mci_host *host)
- 	if (IS_ENABLED(CONFIG_MCI_STARTUP))
- 		mci_card_probe(mci);
- 
-+	if (!host->no_sd && dev_of_node(host->hw_dev))
-+		of_register_fixup(of_broken_cd_fixup, host);
-+
- 	list_add_tail(&mci->list, &mci_list);
- 
- 	return 0;
--- 
-2.30.2
-
diff --git a/configs/platform-v7a/patches/barebox-2022.09.0/series b/configs/platform-v7a/patches/barebox-2022.09.0/series
deleted file mode 100644
index 26c8a02..0000000
--- a/configs/platform-v7a/patches/barebox-2022.09.0/series
+++ /dev/null
@@ -1,3 +0,0 @@
-0001-mci-core-act-upon-broken-cd-device-tree-property.patch
-0002-mci-core-add-broken_cd-device-parameter.patch
-0003-mci-core-fixup-broken-cd-information-into-kernel-DT.patch
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 3c7a632..cd6c211 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -180,8 +180,8 @@ PTXCONF_CONSOLE_SPEED="115200"
 # PTXCONF_AT91BOOTSTRAP2 is not set
 PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
 PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2022.09.0"
-PTXCONF_BAREBOX_COMMON_MD5="f0be6e1a15b5a75c25a41e8c23dc7b95"
+PTXCONF_BAREBOX_COMMON_VERSION="2023.02.1"
+PTXCONF_BAREBOX_COMMON_MD5="348dcab39489a46506a3c205a0da87a9"
 PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
 PTXCONF_BAREBOX_AM335X_MLO=y
 PTXCONF_BAREBOX_AM335X=y