v7a: barebox: version bump v2022.06.0 → v2022.09.0

Th v2022.08.0 release added Raspberry Pi i2c controller support as
well as Raspberry Pi 4 support. We enable both here and will put
the Raspberry Pi 4 support into use in a follow-up commit.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.pengutronix.de/20220930162159.814389-2-a.fatoum@pengutronix.de
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

1 files changed, 46 insertions, 10 deletions

diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 607269b..ccfede1 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,9 +1,10 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.06.0 Configuration
+# Barebox/arm 2022.09.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
+CONFIG_ARM_USE_COMPRESSED_DTB=y
 CONFIG_TEXT_BASE=0x0
 
 #
@@ -47,8 +48,11 @@ CONFIG_CPU_32v7=y
 # processor features
 #
 # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 CONFIG_ARCH_TEXT_BASE=0x0
 CONFIG_MACH_RPI_COMMON=y
+CONFIG_MACH_RPI_AARCH_32_64=y
 
 #
 # select Broadcom BCM283X boards to be built
@@ -57,9 +61,9 @@ CONFIG_MACH_RPI_COMMON=y
 CONFIG_MACH_RPI2=y
 CONFIG_MACH_RPI3=y
 CONFIG_MACH_RPI_CM3=y
+CONFIG_MACH_RPI4=y
 # end of select Broadcom BCM283X boards to be built
 
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_ARM_ASM_UNIFIED=y
 CONFIG_AEABI=y
@@ -67,6 +71,9 @@ CONFIG_THUMB2_BAREBOX=y
 # CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+
 #
 # ARM specific settings
 #
@@ -116,6 +123,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y
 CONFIG_HAVE_IMAGE_COMPRESSION=y
 CONFIG_PBL_IMAGE=y
 CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_USE_COMPRESSED_DTB=y
 CONFIG_PBL_RELOCATABLE=y
 CONFIG_BOARD_GENERIC_DT=y
 CONFIG_IMAGE_COMPRESSION=y
@@ -126,6 +134,7 @@ CONFIG_IMAGE_COMPRESSION_LZO=y
 # CONFIG_IMAGE_COMPRESSION_NONE is not set
 CONFIG_MMU=y
 CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
@@ -188,10 +197,6 @@ CONFIG_PARTITION_DISK_DOS=y
 # CONFIG_PARTITION_DISK_EFI is not set
 CONFIG_ENV_HANDLING=y
 CONFIG_DEFAULT_ENVIRONMENT=y
-# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
-# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set
-# CONFIG_DEFAULT_COMPRESSION_LZO is not set
-# CONFIG_DEFAULT_COMPRESSION_XZ is not set
 CONFIG_DEFAULT_COMPRESSION_NONE=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
@@ -252,6 +257,7 @@ CONFIG_COMPILE_HASH=y
 # CONFIG_CMD_TUTORIAL is not set
 CONFIG_CMD_ARM_CPUINFO=y
 CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DEVLOOKUP is not set
 # CONFIG_CMD_DEVUNBIND is not set
 CONFIG_CMD_DMESG=y
 CONFIG_CMD_DRVINFO=y
@@ -400,6 +406,7 @@ CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 # CONFIG_CMD_POWEROFF is not set
 # CONFIG_CMD_SMC is not set
@@ -473,8 +480,8 @@ CONFIG_PHYLIB=y
 #
 # Network drivers
 #
-# CONFIG_DRIVER_NET_DESIGNWARE is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
 # CONFIG_DRIVER_NET_ENC28J60 is not set
 # CONFIG_DRIVER_NET_FSL_FMAN is not set
 # CONFIG_DRIVER_NET_KS8851_MLL is not set
@@ -527,7 +534,18 @@ CONFIG_DRIVER_SPI_GPIO=y
 # CONFIG_DRIVER_SPI_LITEX_SPIFLASH is not set
 # end of SPI drivers
 
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_BCM283X=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+# end of I2C Hardware Bus support
+
+# CONFIG_I2C_MUX is not set
 CONFIG_MTD=y
 CONFIG_MTD_WRITE=y
 CONFIG_MTD_OOB_DEVICE=y
@@ -579,6 +597,7 @@ CONFIG_USB_STORAGE=y
 #
 # USB Miscellaneous drivers
 #
+# CONFIG_USB_HUB_USB251XB is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_USB_MUSB is not set
 # CONFIG_VIDEO is not set
@@ -623,9 +642,21 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
 # CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_RN568PMIC is not set
 # CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_RK808 is not set
 # end of Multifunction device drivers
 
 #
@@ -645,17 +676,20 @@ CONFIG_LED_GPIO_OF=y
 # CONFIG_LED_GPIO_RGB is not set
 # CONFIG_LED_GPIO_BICOLOR is not set
 CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
 
 #
 # EEPROM support
 #
 # CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_AT24 is not set
 # end of EEPROM support
 
 #
 # Input device support
 #
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_QT1070 is not set
 # CONFIG_KEYBOARD_USB is not set
 # CONFIG_INPUT_SPECIALKEYS is not set
 # end of Input device support
@@ -681,9 +715,12 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_74164 is not set
 # CONFIG_GPIO_74XX_MMIO is not set
 # CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 # CONFIG_GPIO_PL061 is not set
 CONFIG_GPIO_RASPBERRYPI_EXP=y
 # CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
 # CONFIG_GPIO_SIFIVE is not set
 # end of GPIO
 
@@ -853,7 +890,6 @@ CONFIG_LIBFDT=y
 #
 # end of Library gui routines
 
-# CONFIG_BAREBOX_LOGO is not set
 # CONFIG_NLS is not set
 # CONFIG_BLOBGEN is not set
 CONFIG_ARCH_HAS_STACK_DUMP=y