diff options
Diffstat (limited to 'configs/platform-v7a/patches/tf-a-v2.3')
| -rw-r--r-- | configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch | 414 | ||||
| -rw-r--r-- | configs/platform-v7a/patches/tf-a-v2.3/series | 1 |
2 files changed, 0 insertions, 415 deletions
diff --git a/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch b/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch deleted file mode 100644 index abfbd7e..0000000 --- a/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch +++ /dev/null @@ -1,414 +0,0 @@ -From 8713c33c448dddcaee33d71fe3d5d2ed40c49283 Mon Sep 17 00:00:00 2001 -From: Ahmad Fatoum <a.fatoum@pengutronix.de> -Date: Wed, 29 Jan 2020 16:04:18 +0100 -Subject: [PATCH] fdts: stm32mp1: add support for Linux Automation MC-1 - board - -The Linux Automation MC-1 is a SBC built around the Octavo Systems -OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and -PMIC. The board has eMMC and a SD slot for storage. - -Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> ---- - fdts/stm32mp157c-lxa-mc1.dts | 110 ++++++++++++++ - fdts/stm32mp15xx-osd32.dtsi | 271 +++++++++++++++++++++++++++++++++++ - 2 files changed, 381 insertions(+) - create mode 100644 fdts/stm32mp157c-lxa-mc1.dts - create mode 100644 fdts/stm32mp15xx-osd32.dtsi - -diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts -new file mode 100644 -index 000000000000..e75e7b5ba28b ---- /dev/null -+++ b/fdts/stm32mp157c-lxa-mc1.dts -@@ -0,0 +1,110 @@ -+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ -+/* -+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved -+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix -+ */ -+ -+/dts-v1/; -+ -+#include "stm32mp157c.dtsi" -+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" -+#include "stm32mp157c-security.dtsi" -+#include "stm32mp15xx-osd32.dtsi" -+ -+/ { -+ model = "Linux Automation MC-1 board"; -+ compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp157c-osd32", "st,stm32mp157"; -+ -+ aliases { -+ mmc0 = &sdmmc1; -+ mmc1 = &sdmmc2; -+ serial0 = &uart4; -+ }; -+ -+ chosen { -+ stdout-path = &uart4; -+ }; -+ -+ led-act { -+ compatible = "gpio-leds"; -+ -+ green { -+ label = "mc1:green:act"; -+ gpios = <&gpioa 13 1>; -+ linux,default-trigger = "heartbeat"; -+ default-state = "off"; -+ }; -+ }; -+ -+ reg_3v3: regulator_3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "3V3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ vin-supply = <&v3v3>; -+ }; -+}; -+ -+&sdmmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdmmc1_b4_pu_pins_a>; -+ cd-gpios = <&gpioh 3 1>; -+ st,neg-edge; -+ bus-width = <4>; -+ vmmc-supply = <®_3v3>; -+ no-1-8-v; -+ status = "okay"; -+}; -+ -+&sdmmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; -+ non-removable; -+ no-sd; -+ no-sdio; -+ st,neg-edge; -+ bus-width = <8>; -+ vmmc-supply = <®_3v3>; -+ no-1-8-v; -+ mmc-ddr-3_3v; -+ status = "okay"; -+}; -+ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart4_pins_a>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ sdmmc1_b4_pu_pins_a: sdmmc1-pu-b4-0 { -+ pins1 { -+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ -+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ -+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ -+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ -+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ -+ slew-rate = <1>; -+ drive-push-pull; -+ bias-pull-up; -+ }; -+ pins2 { -+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ -+ slew-rate = <2>; -+ drive-push-pull; -+ bias-pull-up; -+ }; -+ }; -+ -+ sdmmc2_d47_pins_b: sdmmc2-d47-1 { -+ pins { -+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* eMMC_D4 */ -+ <STM32_PINMUX('A', 9, AF10)>, /* eMMC_D5 */ -+ <STM32_PINMUX('C', 6, AF10)>, /* eMMC_D6 */ -+ <STM32_PINMUX('C', 7, AF10)>; /* eMMC_D7 */ -+ slew-rate = <1>; -+ drive-push-pull; -+ bias-disable; -+ }; -+ }; -+}; -diff --git a/fdts/stm32mp15xx-osd32.dtsi b/fdts/stm32mp15xx-osd32.dtsi -new file mode 100644 -index 000000000000..453f18c30873 ---- /dev/null -+++ b/fdts/stm32mp15xx-osd32.dtsi -@@ -0,0 +1,271 @@ -+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ -+/* -+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved -+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix -+ */ -+ -+#include "stm32mp157cac-pinctrl.dtsi" -+ -+&i2c4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c4_pins_a>; -+ i2c-scl-rising-time-ns = <185>; -+ i2c-scl-falling-time-ns = <20>; -+ status = "okay"; -+ -+ /* spare dmas for other usage */ -+ /delete-property/ dmas; -+ /delete-property/ dma-names; -+ -+ pmic: stpmic@33 { -+ compatible = "st,stpmic1"; -+ reg = <0x33>; -+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ regulators { -+ compatible = "st,stpmic1-regulators"; -+ -+ ldo1-supply = <&v3v3>; -+ ldo3-supply = <&vdd_ddr>; -+ ldo6-supply = <&v3v3>; -+ pwr_sw1-supply = <&bst_out>; -+ pwr_sw2-supply = <&bst_out>; -+ -+ vddcore: buck1 { -+ regulator-name = "vddcore"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1350000>; -+ regulator-always-on; -+ regulator-initial-mode = <0>; -+ regulator-over-current-protection; -+ }; -+ -+ vdd_ddr: buck2 { -+ regulator-name = "vdd_ddr"; -+ regulator-min-microvolt = <1350000>; -+ regulator-max-microvolt = <1350000>; -+ regulator-always-on; -+ regulator-initial-mode = <0>; -+ regulator-over-current-protection; -+ }; -+ -+ vdd: buck3 { -+ regulator-name = "vdd"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ st,mask-reset; -+ regulator-initial-mode = <0>; -+ regulator-over-current-protection; -+ }; -+ -+ v3v3: buck4 { -+ regulator-name = "v3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ regulator-over-current-protection; -+ regulator-initial-mode = <0>; -+ }; -+ -+ v1v8_audio: ldo1 { -+ regulator-name = "v1v8_audio"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ -+ }; -+ -+ v3v3_hdmi: ldo2 { -+ regulator-name = "v3v3_hdmi"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ -+ }; -+ -+ vtt_ddr: ldo3 { -+ regulator-name = "vtt_ddr"; -+ regulator-min-microvolt = <500000>; -+ regulator-max-microvolt = <750000>; -+ regulator-always-on; -+ regulator-over-current-protection; -+ }; -+ -+ vdd_usb: ldo4 { -+ regulator-name = "vdd_usb"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ vdda: ldo5 { -+ regulator-name = "vdda"; -+ regulator-min-microvolt = <2900000>; -+ regulator-max-microvolt = <2900000>; -+ regulator-boot-on; -+ }; -+ -+ v1v2_hdmi: ldo6 { -+ regulator-name = "v1v2_hdmi"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ regulator-always-on; -+ -+ }; -+ -+ vref_ddr: vref_ddr { -+ regulator-name = "vref_ddr"; -+ regulator-always-on; -+ regulator-over-current-protection; -+ }; -+ -+ bst_out: boost { -+ regulator-name = "bst_out"; -+ }; -+ -+ vbus_otg: pwr_sw1 { -+ regulator-name = "vbus_otg"; -+ regulator-active-discharge; -+ }; -+ -+ vbus_sw: pwr_sw2 { -+ regulator-name = "vbus_sw"; -+ regulator-active-discharge; -+ }; -+ }; -+ -+ pmic_watchdog: watchdog { -+ compatible = "st,stpmic1-wdt"; -+ status = "disabled"; -+ }; -+ }; -+ -+ sip_eeprom: eeprom@50 { -+ compatible = "atmel,24c32"; -+ reg = <0x50>; -+ }; -+}; -+ -+&rng1 { -+ status = "okay"; -+}; -+ -+/* ATF Specific */ -+#include <dt-bindings/clock/stm32mp1-clksrc.h> -+ -+/ { -+ aliases { -+ gpio0 = &gpioa; -+ gpio1 = &gpiob; -+ gpio2 = &gpioc; -+ gpio3 = &gpiod; -+ gpio4 = &gpioe; -+ gpio5 = &gpiof; -+ gpio6 = &gpiog; -+ gpio7 = &gpioh; -+ gpio8 = &gpioi; -+ gpio25 = &gpioz; -+ i2c3 = &i2c4; -+ }; -+}; -+ -+/* CLOCK init */ -+&rcc { -+ secure-status = "disabled"; -+ st,clksrc = < -+ CLK_MPU_PLL1P -+ CLK_AXI_PLL2P -+ CLK_MCU_PLL3P -+ CLK_PLL12_HSE -+ CLK_PLL3_HSE -+ CLK_PLL4_HSE -+ CLK_RTC_LSE -+ CLK_MCO1_DISABLED -+ CLK_MCO2_DISABLED -+ >; -+ -+ st,clkdiv = < -+ 1 /*MPU*/ -+ 0 /*AXI*/ -+ 0 /*MCU*/ -+ 1 /*APB1*/ -+ 1 /*APB2*/ -+ 1 /*APB3*/ -+ 1 /*APB4*/ -+ 2 /*APB5*/ -+ 23 /*RTC*/ -+ 0 /*MCO1*/ -+ 0 /*MCO2*/ -+ >; -+ -+ st,pkcs = < -+ CLK_CKPER_HSE -+ CLK_FMC_ACLK -+ CLK_QSPI_ACLK -+ CLK_ETH_DISABLED -+ CLK_SDMMC12_PLL4P -+ CLK_DSI_DSIPLL -+ CLK_STGEN_HSE -+ CLK_USBPHY_HSE -+ CLK_SPI2S1_PLL3Q -+ CLK_SPI2S23_PLL3Q -+ CLK_SPI45_HSI -+ CLK_SPI6_HSI -+ CLK_I2C46_HSI -+ CLK_SDMMC3_PLL4P -+ CLK_USBO_USBPHY -+ CLK_ADC_CKPER -+ CLK_CEC_LSE -+ CLK_I2C12_HSI -+ CLK_I2C35_HSI -+ CLK_UART1_HSI -+ CLK_UART24_HSI -+ CLK_UART35_HSI -+ CLK_UART6_HSI -+ CLK_UART78_HSI -+ CLK_SPDIF_PLL4P -+ CLK_FDCAN_PLL4R -+ CLK_SAI1_PLL3Q -+ CLK_SAI2_PLL3Q -+ CLK_SAI3_PLL3Q -+ CLK_SAI4_PLL3Q -+ CLK_RNG1_LSI -+ CLK_RNG2_LSI -+ CLK_LPTIM1_PCLK1 -+ CLK_LPTIM23_PCLK3 -+ CLK_LPTIM45_LSE -+ >; -+ -+ /* VCO = 1300.0 MHz => P = 650 (CPU) */ -+ pll1: st,pll@0 { -+ cfg = < 2 80 0 0 0 PQR(1,0,0) >; -+ frac = < 0x800 >; -+ }; -+ -+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ -+ pll2: st,pll@1 { -+ cfg = < 2 65 1 0 0 PQR(1,1,1) >; -+ frac = < 0x1400 >; -+ }; -+ -+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ -+ pll3: st,pll@2 { -+ cfg = < 1 33 1 16 36 PQR(1,1,1) >; -+ frac = < 0x1a04 >; -+ }; -+ -+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ -+ pll4: st,pll@3 { -+ cfg = < 3 98 5 7 7 PQR(1,1,1) >; -+ }; -+}; -+ -+&bsec { -+ board_id: board_id@ec { -+ reg = <0xec 0x4>; -+ status = "okay"; -+ secure-status = "okay"; -+ }; -+}; --- -2.25.0 - diff --git a/configs/platform-v7a/patches/tf-a-v2.3/series b/configs/platform-v7a/patches/tf-a-v2.3/series deleted file mode 100644 index 2f7ede3..0000000 --- a/configs/platform-v7a/patches/tf-a-v2.3/series +++ /dev/null @@ -1 +0,0 @@ -0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch |