summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/platformconfig
Commit message (Collapse)AuthorAgeFilesLines
* v7a: barebox: version bump v2021.02.0 → v2021.04.0Ahmad Fatoum2021-04-231-2/+2
| | | | | | | | | | | | | | | | | | | | | Updating to v2021.04.0 lets us drop the patches we have, but unfortunately we need to import a new patch in return to fix a USB/Ethernet breakage on barebox-rpi2. Kconfig changes are those produced by oldconfig, except for the following: - BTHREAD: new feature that's not used by default, but could use some extra coverage. Enable it for all configuration, except for am335x-mlo, where we have a restrictive size limitation. - MACH_STM32MP15X_EV1: The EV1 is the full featured STM32MP1 evaluation kit. In preperation for supporting this, enable its newly added barebox support. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210421073820.1318-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: migrate 2021.03.0 -> 2021.04.0Roland Hieber2021-04-231-2/+2
| | | | | | | | Migrate with default settings to the new PTXdist version, which was released today. Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: enable GCC_PLUGINSRobert Schwebel2021-03-151-1/+1
| | | | | | | | | PTXdist 2021.03.0 has a bug: without this, the v7a platform cannot be built. This basically reverts 510c23705bc999bda9d0b040418dfebe94fc9c68. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: Add support for Raspberry Pi CM3Uwe Kleine-König2021-03-151-1/+3
| | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* v7a: barebox update 2020.09.0 -> 2021.02.0Uwe Kleine-König2021-03-151-2/+2
| | | | | | | | | | | | | | One new patch is required to fix a regression for USB on rpi3. Also USB on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2 config now. For the beaglebone two patches are added fixing a regression related to a dts sync from upstream. All three patches were already sent to the barebox mailing list. Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* ptxdist: migrate to 2021.03.0Roland Hieber2021-03-151-2/+3
| | | | | | New version came out today, but the diff is uneventful. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: tf-a: update to v2.4Ahmad Fatoum2021-03-151-2/+2
| | | | | | | | | | | | | | | | | Trusted Firmware-A v2.4 was released last month and adds amongst others, enhancements to make use of the trusted boot chain possible with upstream components. The patch stack has now been posted upstream in hope we can eventually drop it: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7339 https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7340 For now, it was rebased with following modifications: - Sync with upstream device tree and new TF-A requirements - CLK_ETH_PLL4P is enabled for possible PTP use Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platform-v7a: linux: version bump 5.8 -> 5.11Robert Schwebel2021-02-231-2/+2
| | | | | | The patch for lxa-mc1 is mainline, remove it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2021.01.0 -> 2021.02.0Roland Hieber2021-02-091-2/+18
| | | | | | | A new PTXdist version was released last week, which also includes a kconfig update from v5.1 to v5.11-rc3. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* ptxdist: version bump 2020.09.0 -> 2021.01.0Robert Schwebel2021-02-021-3/+3
| | | | Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platforms: make DTC_OFTREE_DTS_PATH layer-awareRoland Hieber2021-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | This ports PTXdist commit 4f058f4c37fa9fb1465a: | commit 4f058f4c37fa9fb1465a77757a35c48e5e4a9179 | Author: Michael Olbrich <m.olbrich@pengutronix.de> | Date: 2018-07-31 16:12:58 | | dtc: support layers in DTC_OFTREE_DTS_PATH by default | | PTXDIST_PLATFORMCONFIG_SUBDIR is a relative path and will be searched in | all layers. | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de> Link: https://git.pengutronix.de/cgit/ptxdist/commit/?id=4f058f4c37fa9fb1465a Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: sama5d2: generate image for Groboard Giantboard as wellAhmad Fatoum2020-11-011-0/+2
| | | | | | | Add the same bit of boilerplate we added for the EK1 to get an image generated for the giant board as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: at91: add sama5d2-based giant board device treeAhmad Fatoum2020-11-011-1/+1
| | | | | | | | | | | The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC. The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the SiP as well as a MicroSD slot on the PCB. The device tree is taken from the one in barebox itself based on the vendor's DTS available at https://github.com/Groboards/giantboard-tools Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: generate image for sama5d27 SOM1 Evaluation KitAhmad Fatoum2020-11-011-1/+3
| | | | | | | | | | With the previous barebox and kernel changes, we can combine it with the DistroKit-v7a rootfs to get an image to boot on the sama5d27-som1-ek. Do this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> [rebased to master] Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: add new rule for sama5d2 supportAhmad Fatoum2020-11-011-0/+1
| | | | | | | | | | | | | Later commits will have the v7a platform generate an image for Cortex-A5 based sama5d2 as well. Import here a new barebox-at91 rule that extends the barebox-common rule to provide support for the two sama5d27 boards supported by barebox: barebox-sama5d27-som1-ek.img barebox-sama5d27-som1-ek-xload-mmc.img barebox-groboards-sama5d27-giantboard.img barebox-groboards-sama5d27-giantboard-xload-mmc.img Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump v2020.08.1 → v2020.09.0Ahmad Fatoum2020-11-011-2/+2
| | | | | | | | | | | | | The previous upgrade to v2020.08.1 gave us first stage boot support on the sama5d2, but had slight multi-image breakage because the fresh giantboard support on the sama5d27 messed up the EK1 environment support: it set nv.boot.default=mmc1 in the built-in environment when none should've been set. This is fixed in v2020.09.0, which is imported here. The config changes are those of olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platforms: host-dtc: version bump 1.5.1 -> 1.6.0Roland Hieber2020-11-011-2/+2
| | | | | | | | | | Version 1.6.0 includes a fix for building on hosts with gcc 10. This ports PTXdist commit 7990fbf116f66f82796b (2020-05-24, Michael Olbrich: "host-dtc: update default version to 1.6.0"). Link: https://lkml.org/lkml/2020/4/1/1206 Link: https://git.pengutronix.de/cgit/ptxdist/commit/?id=7990fbf116f66f82796b Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox: version bump 2020.06.0 -> 2020.08.1Roland Hieber2020-09-151-2/+2
| | | | | | | | | | Update to the most recent barebox release, which includes our patch. CONFIG_USB_GADGET_FASTBOOT_* have been renamed to CONFIG_FASTBOOT_*, for all other new options use the default values. Tested-by: Roland Hieber <rhi@pengutronix.de> on qemu-vexpress, rpi3-b Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* PTXdist: migrate 2020.08.0 -> 2020.09.0Roland Hieber2020-09-151-2/+5
| | | | | | Migrate to the most current PTXdist version with default settings. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: kernel: version bump 5.8 -> 5.8.9Roland Hieber2020-09-141-2/+2
|
* v7a: update to OSELAS.Toolchain 2020.08.0Roland Hieber2020-08-311-3/+3
| | | | | | Update to the latest toolchain, which was released this week. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* ptxdist: version bump 2020.07.0 -> 2020.08.0Robert Schwebel2020-08-101-3/+3
| | | | | | | | | A new ptxdist version is out. We set PTXCONF_KERNEL_CONFIG_BASE_VERSION=y in all platforms, as DistroKit is a base layer for other BSPs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: kernel version bump 5.6.2 -> 5.8Holger Assmann2020-08-101-2/+2
| | | | | | | | | | | | | | | | | | | The latest kernel release now contains the device trees for the Linux Automation MC-1. We can thus drop them from the BSP. On the Kconfig front, we dropped CONFIG_MMC_OMAP(_HS) in favor of CONFIG_MMC_SDHCI_OMAP. For a while now, Linux has had a sdhci-omap driver for TI's OMAP SoCs making use of the SDHCI core library. This was in addition to the older omap-hsmmc driver, which didn't. Linux commit 0b4edf11187 ("ARM: dts: Move am33xx and am43xx mmc nodes tosdhci-omap driver") first included in v5.8 changes the device tree compatible of the mmc nodes on the am33xx and am43xx SoCs away from the omap-hsmmc to the SDHCI driver. Add the new compatibles, so we aren't broken by the change. Co-authored-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
* ptxdist: version bump 2020.06.0 -> 2020.07.0Robert Schwebel2020-07-151-2/+3
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2020.04.0 → v2020.06.0Ahmad Fatoum2020-06-171-2/+2
| | | | | | | | | | | | | | This allows us to drop the patch stack we had for Linux Automation MC-1 support. The series went into barebox with a fix that makes a warning about the eMMC environment go away. In return we import a single patch to address a breakage on the rpi3b platform. Being a bug fix, we should be able to drop the patch along with v2020.07.0. On the Kconfig front, CONFIG_OF_NET was dropped upstream, because it was an unreferenced symbol. All Kconfig changes are the result of an olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* ptxdist: version bump 2020.05.0 -> 2020.06.0Robert Schwebel2020-06-171-2/+2
| | | | | | A new ptxdist version is out, so we update our configs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2020.04.0 -> 2020.05.0Robert Schwebel2020-05-081-2/+2
| | | | | | A new ptxdist version is out, update DistroKit. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: generate image for Linux Automation MC-1Ahmad Fatoum2020-04-271-0/+2
| | | | | | | With TF-A and barebox support added in previous commits, everything is now in place for having DistroKit generate a MC-1 rootfs image. Do so. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: stm32mp: add Linux Automation MC-1 device treeAhmad Fatoum2020-04-271-2/+2
| | | | | | | | | | | The device tree is based on the one in linux-stm32/stm32-next, which will probably be merged for Linux v5.8-rc1. Instead of waiting that long, we import it here with some stuff removed/changed, so it's usable without the prerequisite patches. We can drop them again, when we upgrade to v5.8-rc1. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: tf-a: add support for Linux Automation MC-1Ahmad Fatoum2020-04-261-1/+1
| | | | | | | | | | | | | The MC-1 can boot from SD-Card with the DK2 TF-A, but for use in production, it's meant to boot from eMMC. Patch in the MC-1 device tree, which enables the appropriate SDMMC controller. RAM timings are those of the DK-2, which have worked so far, but should be reconsidered prior to upstreaming. [Note: eMMC boot doesn't yet work, presumably due to hardware issues.] Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: tf-a: version bump v2.2 -> v2.3Ahmad Fatoum2020-04-261-3/+3
| | | | | | | | | | | | | | TF-A v2.3 brings in support for multi-image STM32MP1 builds, which means less boilerplate for us, because we can build images for multiple STM32MP1 boards at once with the same rule. We want to do this in the follow-up commit, so bump the version now. With this update, all boot device drivers are disabled by default. We can afford continuing to waste a few kilobytes in the first stage bootloader and in the future, we might want to support boards that don't boot from SDMMC anyway, so just (re-)enable all of them. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* ptxdist: migrate 2020.03.0 -> 2020.04.0 with defaultsAhmad Fatoum2020-04-261-2/+2
| | | | | | | | | With this release, the TF-A rule went upstream in revised form, so it's dropped as part of the migration. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> [adapted to current next] Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump 2020.02.0 -> 2020.04.0Ahmad Fatoum2020-04-151-2/+2
| | | | | | | | | This lets us drop the am335x USB fixes, because they were already in the v2020.03.0 release. Only new enabled config option is CONFIG_USB_GADGET_FASTBOOT_CMD_OEM, which was non-configurable before. Marking it as enabled avoid a regression for people using `fastboot oem exec` Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* kernel: version bump 5.5 -> 5.6.2Robert Schwebel2020-04-031-2/+2
| | | | | | A new kernel is out, update all platforms. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2020.02.0 -> 2020.03.0Robert Schwebel2020-03-271-2/+2
| | | | | | A new ptxdist version is out, update the configs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: add stm32mp157c-dk2 SD-Card imageAhmad Fatoum2020-03-051-1/+3
| | | | | | | | Both STM32MP BootROM and TF-A expect the subsequent bootloader stage to come from a GPT partition when booting from SD-Card. Add a genimage config that describes this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: stm32mp: enable TF-A for first stageAhmad Fatoum2020-03-051-1/+17
| | | | | | | The STM32MP uses TF-A as first stage boot loader. Configure it appropriately for use. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* rules: add ARM Trusted Firmware-AAhmad Fatoum2020-03-051-0/+1
| | | | | | | | | | | | | | | Trusted Firmware-A (TF-A) is a reference implementation of secure world software for Arm A-Profile architectures (Armv8-A and Armv7-A). TF-A is used as first-stage bootloader on the STM32MP1. We'll use barebox for second-stage only for now, thus add a rule for TF-A. Tested-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> [oldconfiged rpi an v8a platforms while applying] Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Link: https://www.mail-archive.com/ptxdist@pengutronix.de/msg15828.html
* v7a: barebox: add new stm32mp ruleAhmad Fatoum2020-03-051-0/+1
| | | | | | | | | | | | Since v2019.12.0, barebox now has SD/MMC and Ethernet support for the STM32MP1. Thus there is nothing holding us back from extending DistroKit's v7a platform to support the SoC. Add a barebox-stm32mp rule as first step. The barebox rule add here is only meant as second-stage bootloader (SSBL). First-stage (FSBL) will be TF-A introduced in a later patch. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump 2020.01.0 -> 2020.02.0Ahmad Fatoum2020-02-191-2/+2
| | | | | | | | | | | | | | | | | | | | | barebox v2020.02.0 has just been released. Drop the now upstream rpi patches, oldconfig the configs and use it. As seen in the config diffs, two of our configuration options have changed with this release: CONFIG_CLOCKSOURCE_ARMV8_TIMER=y: barebox support for ARMv7 (and ARMv8) architected timers on >= ARMv7 has now been reenabled. This should improve clocksource accuracy on the rpi3 and vexpress. The name will be changed to indicate that it's not ARMv8 specific in v2020.03.0. CONFIG_DEFAULT_ENVIRONMENT=n in am335x-mlo: This symbol became selectable even without CONFIG_ENV_HANDLING. We didn't use the environment before for this configuration, so we probably don't want to start now, so this is left disabled. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* ptxdist: version bump 2020.01.0 -> 2020.02.0Robert Schwebel2020-02-161-2/+2
| | | | | | A new ptxdist version is out, update the configs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* kernel: version bump 5.4 -> 5.5Robert Schwebel2020-01-291-2/+2
| | | | | | A new kernel is out, so let's update DistroKit. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2019.12.0 -> 2020.01.0Robert Schwebel2020-01-231-2/+2
| | | | | | A new ptxdist version is out, update the configs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: barebox: version bump 2019.12.0 -> 2020.01.0Ahmad Fatoum2020-01-141-2/+2
| | | | | | | barebox v2020.01.0 has just been released. Rebase the patch stack, oldconfig the configs and use it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platform-v7a: barebox: version bump 2019.11.0 -> 2019.12.0DistroKit-2019.12.0Sascha Hauer2019-12-201-2/+2
| | | | | | Use the latest and greatest. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ptxdist: migrate 2019.11.0 -> 2019.12.0 with defaultsRoland Hieber2019-12-101-8/+5
| | | | Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* kernel: version bump 5.3 -> 5.4Robert Schwebel2019-11-251-2/+2
| | | | | | Linux 5.4 is out, update the kernel on all platforms. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: barebox: version bump 2019.10.0 -> 2019.11.0Robert Schwebel2019-11-111-2/+2
| | | | | | A new barebox version is out, use it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2019.10.1 -> 2019.11.0Robert Schwebel2019-11-091-4/+5
| | | | | | A new ptxdist version is out, use it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump 2019.08.1 → 2019.10.0Ahmad Fatoum2019-11-041-2/+2
| | | | | | | There's a new barebox in town. Upgrade to it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 14:55:45 +0000