summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/platformconfig
Commit message (Collapse)AuthorAgeFilesLines
* ptxdist: version bump 2022.04.0 -> 2022.05.0HEADnextmasterRobert Schwebel2022-05-061-2/+2
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: rpi: unify rpi{2, 3, cm3}.hdimg into common rpi.hdimgOleksij Rempel2022-04-261-2/+0
| | | | | | | | | | | | | | barebox has had the ability to generate an extra image that's bootable like a kernel for a while now. With small adjustment, we can let the videocore use this image and pass it the appropriate device tree depending on the board used. Moving this decision into the VideoCore allows us to use the same image for both Raspberry Pi 2, Rasperry Pi 3 and Raspberry Pi CM3. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20220426083821.1829442-3-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: update v2022.01.0 → v2022.04.0Ahmad Fatoum2022-04-261-2/+2
| | | | | | | | | | | | | | Config changes are those of olddefconfig with the exception of CONFIG_FS_UBIFS_COMPRESSION_ZSTD for the i.MX6 barebox: We already have UBIFS support enabled, so it makes sense to allow mounting UBIFS with zstd as well. This update imports two barebox patches to address regressions due to recent Raspberry Pi upstream rework. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20220426083821.1829442-2-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2022.03.0 -> 2022.04.0Robert Schwebel2022-04-091-2/+2
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: kernel: version bump 5.15 -> 5.17Robert Schwebel2022-03-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 5.16, there is a bug that results in this backtrace: [    0.000000] L2C: platform modifies aux control register: 0x02020000 -> 0x02420000 [    0.000000] L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000 [    0.009001] Failed to initialize '/bus@40000000/motherboard-bus@40000000/iofpga@7,00000000/timer@12000': -22 [    0.011756] smp_twd: clock not found -2 [    0.922280] irq: type mismatch, failed to map hwirq-75 for interrupt-controller@1e001000! [    1.493972] physmap-flash 48000000.psram: map_probe failed [    1.668170] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM [    1.668867] Modules linked in: [    1.669245] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.16.0 #1 [    1.669593] Hardware name: ARM-Versatile Express [    1.669953] PC is at crypto_unregister_alg+0xf8/0x100 [    1.670857] LR is at 0x0 [    1.671324] pc : [<c04bcc84>]    lr : [<00000000>]    psr: 20000013 [    1.671595] sp : c18c7ea0  ip : 00000000  fp : c0d7e100 [    1.671826] r10: c0e55858  r9 : c100c000  r8 : 00000000 [    1.672067] r7 : c100c41c  r6 : 00000001  r5 : c198ad00  r4 : c1c23080 [    1.672354] r3 : 00000002  r2 : ffffffff  r1 : 00000001  r0 : c0f9e0d0 [    1.672702] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none [    1.673012] Control: 10c5387d  Table: 6000406a  DAC: 00000051 [    1.673309] Register r0 information: non-slab/vmalloc memory [    1.674112] Register r1 information: non-paged memory [    1.674405] Register r2 information: non-paged memory [    1.674629] Register r3 information: non-paged memory [    1.674853] Register r4 information: slab kmalloc-512 start c1c23000 pointer offset 128 size 512 [    1.675788] Register r5 information: slab task_struct start c198ad00 pointer offset 0 [    1.676170] Register r6 information: non-paged memory [    1.676474] Register r7 information: non-slab/vmalloc memory [    1.676727] Register r8 information: NULL pointer [    1.676938] Register r9 information: non-slab/vmalloc memory [    1.677182] Register r10 information: non-slab/vmalloc memory [    1.677429] Register r11 information: non-slab/vmalloc memory [    1.677686] Register r12 information: NULL pointer [    1.677923] Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) We work around this by switching on CONFIG_CRYPTO_CBC=y. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2022.02.0 -> 2022.0.0Robert Schwebel2022-03-221-3/+2
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2022.01.0 -> 2022.02.0Robert Schwebel2022-03-011-2/+6
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: update v2021.11.0 → v2022.01.0Ahmad Fatoum2022-01-221-2/+2
| | | | | | | | | | | | Freshest barebox release incorporates the OMAP patches we have in the BSP. Bump up the release and drop these two patches in return. The release also introduced CONFIG_STM32_BSEC_WRITE, which enables blowing e-fuses on STM32MP1 SoCs, e.g. to persist an Ethernet address. We support a couple of STM32MP1 boards, so it makes sense to enable this option. All other Kconfig changes are those of olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* ptxdist: version bump 2021.12.0 -> 2022.01.0Robert Schwebel2022-01-221-2/+4
| | | | | | Update to the latest ptxdist release. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2021.11.0 -> 2021.12.0Robert Schwebel2021-12-091-2/+3
| | | | | | | | | | A new ptxdist version has been released, update. ptxdist-2021.12.0 has genimage-15 which has a strikter check for partitions that overlay: specify holes in the barebox partition that allow to overlap with MBR. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: kernel: version bump v5.14 -> v5.15Robert Schwebel2021-12-071-2/+2
| | | | | | We have a new kernel, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.08.0 → v2021.11.0Ahmad Fatoum2021-11-261-2/+2
| | | | | | | | Update to latest barebox release. Config changes are the default. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20211126064836.1306873-2-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2021.06.0 -> 2021.11.0Robert Schwebel2021-11-241-7/+7
| | | | | | | We missed some ptxdist updates, so it might be a good time to catch up now. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-{rpi,v7a,v8a,x86_64}: kernel: version bump 5.13.4 -> 5.14Robert Schwebel2021-08-301-2/+2
| | | | | | Linus released a new kernel, so we update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.07.0 → v2021.08.0Ahmad Fatoum2021-08-241-2/+2
| | | | | | | | | Update to latest barebox release. Config changes are the default. In return we can drop the one patch that went upstream in the mean time. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210824125248.22580-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: generate image for STM32MP7C-EV1Ahmad Fatoum2021-07-221-2/+4
| | | | | | | | | | | | | | The STM32MP157C-EV1 Evaluation board is the full-feature demonstration and development platform for STMicroelectronics Arm®-based dual Cortex®-A7 32 bits and Cortex®-M4 32 bits MPUs in the STM32MP1 Series. The small siblings DK1 and DK2 are already supported. Add now support for the EV1 as well, so DistroKit can be used out-of-the-box with all the official STM32MP1 development kits. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210722133520.17946-4-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: kernel: version bump v5.11 → v5.13.4Ahmad Fatoum2021-07-221-2/+2
| | | | | | | | | | | There's been two Linux releases since the last bump, so it's about time we update. The config changes by olddefconfig look normal, so they are taken as is. Only thing standing out is the removal of /dev/kmem. It will likely not be missed. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210722133520.17946-2-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.05.0 → v2021.07.0Ahmad Fatoum2021-07-221-2/+2
| | | | | | | | | | | | | | | barebox v2021.07.0 now comes with support for first stage boot on the SAMA5D3. The SAMA5D3 has a v7a CPU but lacks NEON, so it doesn't make sense to enable for the v7a platform. Unfortunately, barebox master is upset if you don't build both sama5d2 and sama5d3 at the same time. Instead of working around this in the defconfig and enabling a board we don't need and may forget to disable, import a small patch. We should be able to drop this with v2021.08.0. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210722133520.17946-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: tf-a: update to v2.5 for LXA MC-1 supportAhmad Fatoum2021-07-061-2/+2
| | | | | | | | | | The v2.5 release of the ARM trusted firmware now contains support for the Linux Automation MC-1, allowing us to drop our board support patches. Use it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210706045740.20866-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: migrate 2021.04.0 -> 2021.06.0Roland Hieber2021-06-201-2/+2
| | | | | | | | Migrate all platforms with default options. Signed-off-by: Roland Hieber <rhi@pengutronix.de> Link: https://lore.pengutronix.de/20210620180725.5193-1-rhi@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.04.0 → v2021.05.0Ahmad Fatoum2021-06-021-2/+2
| | | | | | | | | | | | | | | | Updating to v2021.05.0 lets us drop the single patch we have, as it went upstream in revised form. Kconfig changes are those produced by oldconfig. One notable new option is CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG, which allows barebox to embed its configuration as /env/data/config analogously to /proc/config.gz, which we already enable for Linux. This is not enabled here, but might be something we want to use eventually. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210602111803.15832-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.02.0 → v2021.04.0Ahmad Fatoum2021-04-231-2/+2
| | | | | | | | | | | | | | | | | | | | | Updating to v2021.04.0 lets us drop the patches we have, but unfortunately we need to import a new patch in return to fix a USB/Ethernet breakage on barebox-rpi2. Kconfig changes are those produced by oldconfig, except for the following: - BTHREAD: new feature that's not used by default, but could use some extra coverage. Enable it for all configuration, except for am335x-mlo, where we have a restrictive size limitation. - MACH_STM32MP15X_EV1: The EV1 is the full featured STM32MP1 evaluation kit. In preperation for supporting this, enable its newly added barebox support. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210421073820.1318-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: migrate 2021.03.0 -> 2021.04.0Roland Hieber2021-04-231-2/+2
| | | | | | | | Migrate with default settings to the new PTXdist version, which was released today. Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: enable GCC_PLUGINSRobert Schwebel2021-03-151-1/+1
| | | | | | | | | PTXdist 2021.03.0 has a bug: without this, the v7a platform cannot be built. This basically reverts 510c23705bc999bda9d0b040418dfebe94fc9c68. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: Add support for Raspberry Pi CM3Uwe Kleine-König2021-03-151-1/+3
| | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* v7a: barebox update 2020.09.0 -> 2021.02.0Uwe Kleine-König2021-03-151-2/+2
| | | | | | | | | | | | | | One new patch is required to fix a regression for USB on rpi3. Also USB on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2 config now. For the beaglebone two patches are added fixing a regression related to a dts sync from upstream. All three patches were already sent to the barebox mailing list. Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* ptxdist: migrate to 2021.03.0Roland Hieber2021-03-151-2/+3
| | | | | | New version came out today, but the diff is uneventful. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: tf-a: update to v2.4Ahmad Fatoum2021-03-151-2/+2
| | | | | | | | | | | | | | | | | Trusted Firmware-A v2.4 was released last month and adds amongst others, enhancements to make use of the trusted boot chain possible with upstream components. The patch stack has now been posted upstream in hope we can eventually drop it: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7339 https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7340 For now, it was rebased with following modifications: - Sync with upstream device tree and new TF-A requirements - CLK_ETH_PLL4P is enabled for possible PTP use Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platform-v7a: linux: version bump 5.8 -> 5.11Robert Schwebel2021-02-231-2/+2
| | | | | | The patch for lxa-mc1 is mainline, remove it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2021.01.0 -> 2021.02.0Roland Hieber2021-02-091-2/+18
| | | | | | | A new PTXdist version was released last week, which also includes a kconfig update from v5.1 to v5.11-rc3. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* ptxdist: version bump 2020.09.0 -> 2021.01.0Robert Schwebel2021-02-021-3/+3
| | | | Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platforms: make DTC_OFTREE_DTS_PATH layer-awareRoland Hieber2021-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | This ports PTXdist commit 4f058f4c37fa9fb1465a: | commit 4f058f4c37fa9fb1465a77757a35c48e5e4a9179 | Author: Michael Olbrich <m.olbrich@pengutronix.de> | Date: 2018-07-31 16:12:58 | | dtc: support layers in DTC_OFTREE_DTS_PATH by default | | PTXDIST_PLATFORMCONFIG_SUBDIR is a relative path and will be searched in | all layers. | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de> Link: https://git.pengutronix.de/cgit/ptxdist/commit/?id=4f058f4c37fa9fb1465a Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: sama5d2: generate image for Groboard Giantboard as wellAhmad Fatoum2020-11-011-0/+2
| | | | | | | Add the same bit of boilerplate we added for the EK1 to get an image generated for the giant board as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: at91: add sama5d2-based giant board device treeAhmad Fatoum2020-11-011-1/+1
| | | | | | | | | | | The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC. The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the SiP as well as a MicroSD slot on the PCB. The device tree is taken from the one in barebox itself based on the vendor's DTS available at https://github.com/Groboards/giantboard-tools Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: generate image for sama5d27 SOM1 Evaluation KitAhmad Fatoum2020-11-011-1/+3
| | | | | | | | | | With the previous barebox and kernel changes, we can combine it with the DistroKit-v7a rootfs to get an image to boot on the sama5d27-som1-ek. Do this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> [rebased to master] Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: add new rule for sama5d2 supportAhmad Fatoum2020-11-011-0/+1
| | | | | | | | | | | | | Later commits will have the v7a platform generate an image for Cortex-A5 based sama5d2 as well. Import here a new barebox-at91 rule that extends the barebox-common rule to provide support for the two sama5d27 boards supported by barebox: barebox-sama5d27-som1-ek.img barebox-sama5d27-som1-ek-xload-mmc.img barebox-groboards-sama5d27-giantboard.img barebox-groboards-sama5d27-giantboard-xload-mmc.img Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump v2020.08.1 → v2020.09.0Ahmad Fatoum2020-11-011-2/+2
| | | | | | | | | | | | | The previous upgrade to v2020.08.1 gave us first stage boot support on the sama5d2, but had slight multi-image breakage because the fresh giantboard support on the sama5d27 messed up the EK1 environment support: it set nv.boot.default=mmc1 in the built-in environment when none should've been set. This is fixed in v2020.09.0, which is imported here. The config changes are those of olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platforms: host-dtc: version bump 1.5.1 -> 1.6.0Roland Hieber2020-11-011-2/+2
| | | | | | | | | | Version 1.6.0 includes a fix for building on hosts with gcc 10. This ports PTXdist commit 7990fbf116f66f82796b (2020-05-24, Michael Olbrich: "host-dtc: update default version to 1.6.0"). Link: https://lkml.org/lkml/2020/4/1/1206 Link: https://git.pengutronix.de/cgit/ptxdist/commit/?id=7990fbf116f66f82796b Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox: version bump 2020.06.0 -> 2020.08.1Roland Hieber2020-09-151-2/+2
| | | | | | | | | | Update to the most recent barebox release, which includes our patch. CONFIG_USB_GADGET_FASTBOOT_* have been renamed to CONFIG_FASTBOOT_*, for all other new options use the default values. Tested-by: Roland Hieber <rhi@pengutronix.de> on qemu-vexpress, rpi3-b Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* PTXdist: migrate 2020.08.0 -> 2020.09.0Roland Hieber2020-09-151-2/+5
| | | | | | Migrate to the most current PTXdist version with default settings. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: kernel: version bump 5.8 -> 5.8.9Roland Hieber2020-09-141-2/+2
|
* v7a: update to OSELAS.Toolchain 2020.08.0Roland Hieber2020-08-311-3/+3
| | | | | | Update to the latest toolchain, which was released this week. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* ptxdist: version bump 2020.07.0 -> 2020.08.0Robert Schwebel2020-08-101-3/+3
| | | | | | | | | A new ptxdist version is out. We set PTXCONF_KERNEL_CONFIG_BASE_VERSION=y in all platforms, as DistroKit is a base layer for other BSPs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: kernel version bump 5.6.2 -> 5.8Holger Assmann2020-08-101-2/+2
| | | | | | | | | | | | | | | | | | | The latest kernel release now contains the device trees for the Linux Automation MC-1. We can thus drop them from the BSP. On the Kconfig front, we dropped CONFIG_MMC_OMAP(_HS) in favor of CONFIG_MMC_SDHCI_OMAP. For a while now, Linux has had a sdhci-omap driver for TI's OMAP SoCs making use of the SDHCI core library. This was in addition to the older omap-hsmmc driver, which didn't. Linux commit 0b4edf11187 ("ARM: dts: Move am33xx and am43xx mmc nodes tosdhci-omap driver") first included in v5.8 changes the device tree compatible of the mmc nodes on the am33xx and am43xx SoCs away from the omap-hsmmc to the SDHCI driver. Add the new compatibles, so we aren't broken by the change. Co-authored-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
* ptxdist: version bump 2020.06.0 -> 2020.07.0Robert Schwebel2020-07-151-2/+3
| | | | | | A new ptxdist version is out, update. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2020.04.0 → v2020.06.0Ahmad Fatoum2020-06-171-2/+2
| | | | | | | | | | | | | | This allows us to drop the patch stack we had for Linux Automation MC-1 support. The series went into barebox with a fix that makes a warning about the eMMC environment go away. In return we import a single patch to address a breakage on the rpi3b platform. Being a bug fix, we should be able to drop the patch along with v2020.07.0. On the Kconfig front, CONFIG_OF_NET was dropped upstream, because it was an unreferenced symbol. All Kconfig changes are the result of an olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* ptxdist: version bump 2020.05.0 -> 2020.06.0Robert Schwebel2020-06-171-2/+2
| | | | | | A new ptxdist version is out, so we update our configs. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* ptxdist: version bump 2020.04.0 -> 2020.05.0Robert Schwebel2020-05-081-2/+2
| | | | | | A new ptxdist version is out, update DistroKit. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: generate image for Linux Automation MC-1Ahmad Fatoum2020-04-271-0/+2
| | | | | | | With TF-A and barebox support added in previous commits, everything is now in place for having DistroKit generate a MC-1 rootfs image. Do so. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: stm32mp: add Linux Automation MC-1 device treeAhmad Fatoum2020-04-271-2/+2
| | | | | | | | | | | The device tree is based on the one in linux-stm32/stm32-next, which will probably be merged for Linux v5.8-rc1. Instead of waiting that long, we import it here with some stuff removed/changed, so it's usable without the prerequisite patches. We can drop them again, when we upgrade to v5.8-rc1. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>