summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-05-08 08:15:01 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-05-08 08:15:01 +0200
commit5f713938cb13447de8fdc27d93b2197d2e870cf4 (patch)
tree11b8a7c7796518edcdcc9f511ccec70131cccf68
parent6b85c20d46812bdbc062b863261c3e5100e30556 (diff)
downloadbarebox-5f713938cb13447de8fdc27d93b2197d2e870cf4.tar.gz
dts: update to v4.17-rc2
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-rw-r--r--dts/Bindings/thermal/exynos-thermal.txt23
-rw-r--r--dts/Bindings/thermal/thermal.txt16
-rw-r--r--dts/Bindings/timer/nuvoton,npcm7xx-timer.txt21
-rw-r--r--dts/Bindings/timer/nxp,tpm-timer.txt2
-rw-r--r--dts/src/mips/img/boston.dts6
5 files changed, 34 insertions, 34 deletions
diff --git a/dts/Bindings/thermal/exynos-thermal.txt b/dts/Bindings/thermal/exynos-thermal.txt
index 1b596fd..b957acf 100644
--- a/dts/Bindings/thermal/exynos-thermal.txt
+++ b/dts/Bindings/thermal/exynos-thermal.txt
@@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured):
- samsung,exynos5433-tmu: 8
- samsung,exynos7-tmu: 8
-Following properties are mandatory (depending on SoC):
-- samsung,tmu_gain: Gain value for internal TMU operation.
-- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
-- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
-- samsung,tmu_efuse_value: Default level of temperature - it is needed when
- in factory fusing produced wrong value
-- samsung,tmu_min_efuse_value: Minimum temperature fused value
-- samsung,tmu_max_efuse_value: Maximum temperature fused value
-- samsung,tmu_first_point_trim: First point trimming value
-- samsung,tmu_second_point_trim: Second point trimming value
-- samsung,tmu_default_temp_offset: Default temperature offset
-- samsung,tmu_cal_type: Callibration type
-
** Optional properties:
- vtmu-supply: This entry is optional and provides the regulator node supplying
@@ -78,7 +65,7 @@ Example 1):
clocks = <&clock 383>;
clock-names = "tmu_apbif";
vtmu-supply = <&tmu_regulator_node>;
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Example 2):
@@ -89,7 +76,7 @@ Example 2):
interrupts = <0 58 0>;
clocks = <&clock 21>;
clock-names = "tmu_apbif";
- #include "exynos5440-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
@@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 184 0>;
clocks = <&clock 318>, <&clock 318>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu3: tmu@1006c000 {
@@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 185 0>;
clocks = <&clock 318>, <&clock 319>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_gpu: tmu@100a0000 {
@@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 215 0>;
clocks = <&clock 319>, <&clock 318>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Note: For multi-instance tmu each instance should have an alias correctly
diff --git a/dts/Bindings/thermal/thermal.txt b/dts/Bindings/thermal/thermal.txt
index 1719d47..cc553f0 100644
--- a/dts/Bindings/thermal/thermal.txt
+++ b/dts/Bindings/thermal/thermal.txt
@@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to
the different fan speeds possible. Cooling states are referred to by
single unsigned integers, where larger numbers mean greater heat
dissipation. The precise set of cooling states associated with a device
-(as referred to by the cooling-min-level and cooling-max-level
-properties) should be defined in a particular device's binding.
+should be defined in a particular device's binding.
For more examples of cooling devices, refer to the example sections below.
Required properties:
@@ -69,15 +68,6 @@ Required properties:
See Cooling device maps section below for more details
on how consumers refer to cooling devices.
-Optional properties:
-- cooling-min-level: An integer indicating the smallest
- Type: unsigned cooling state accepted. Typically 0.
- Size: one cell
-
-- cooling-max-level: An integer indicating the largest
- Type: unsigned cooling state accepted.
- Size: one cell
-
* Trip points
The trip node is a node to describe a point in the temperature domain
@@ -226,8 +216,6 @@ cpus {
396000 950000
198000 850000
>;
- cooling-min-level = <0>;
- cooling-max-level = <3>;
#cooling-cells = <2>; /* min followed by max */
};
...
@@ -241,8 +229,6 @@ cpus {
*/
fan0: fan@48 {
...
- cooling-min-level = <0>;
- cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt b/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt
new file mode 100644
index 0000000..ea22dfe
--- /dev/null
+++ b/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt
@@ -0,0 +1,21 @@
+Nuvoton NPCM7xx timer
+
+Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit
+timer counters.
+
+Required properties:
+- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750.
+- reg : Offset and length of the register set for the device.
+- interrupts : Contain the timer interrupt with flags for
+ falling edge.
+- clocks : phandle of timer reference clock (usually a 25 MHz clock).
+
+Example:
+
+timer@f0008000 {
+ compatible = "nuvoton,npcm750-timer";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf0008000 0x50>;
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+};
+
diff --git a/dts/Bindings/timer/nxp,tpm-timer.txt b/dts/Bindings/timer/nxp,tpm-timer.txt
index b4aa7dd..f82087b 100644
--- a/dts/Bindings/timer/nxp,tpm-timer.txt
+++ b/dts/Bindings/timer/nxp,tpm-timer.txt
@@ -15,7 +15,7 @@ Required properties:
- interrupts : Should be the clock event device interrupt.
- clocks : The clocks provided by the SoC to drive the timer, must contain
an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "igp" and "per".
+- clock-names : Must include the following entries: "ipg" and "per".
Example:
tpm5: tpm@40260000 {
diff --git a/dts/src/mips/img/boston.dts b/dts/src/mips/img/boston.dts
index 1bd1054..65af3f6 100644
--- a/dts/src/mips/img/boston.dts
+++ b/dts/src/mips/img/boston.dts
@@ -51,6 +51,8 @@
ranges = <0x02000000 0 0x40000000
0x40000000 0 0x40000000>;
+ bus-range = <0x00 0xff>;
+
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci0_intc 1>,
<0 0 0 2 &pci0_intc 2>,
@@ -79,6 +81,8 @@
ranges = <0x02000000 0 0x20000000
0x20000000 0 0x20000000>;
+ bus-range = <0x00 0xff>;
+
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci1_intc 1>,
<0 0 0 2 &pci1_intc 2>,
@@ -107,6 +111,8 @@
ranges = <0x02000000 0 0x16000000
0x16000000 0 0x100000>;
+ bus-range = <0x00 0xff>;
+
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci2_intc 1>,
<0 0 0 2 &pci2_intc 2>,