Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 81 insertions, 0 deletions

diff --git a/dts/Bindings/arm/arch_timer.txt b/dts/Bindings/arm/arch_timer.txt
new file mode 100644
index 0000000000..06fc760259
--- /dev/null
+++ b/dts/Bindings/arm/arch_timer.txt
@@ -0,0 +1,81 @@
+* ARM architected timer
+
+ARM cores may have a per-core architected timer, which provides per-cpu timers,
+or a memory mapped architected timer, which provides up to 8 frames with a
+physical and optional virtual timer per frame.
+
+The per-core architected timer is attached to a GIC to deliver its
+per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+to deliver its interrupts via SPIs.
+
+** CP15 Timer node properties:
+
+- compatible : Should at least contain one of
+	"arm,armv7-timer"
+	"arm,armv8-timer"
+
+- interrupts : Interrupt list for secure, non-secure, virtual and
+  hypervisor timers, in that order.
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+Example:
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+** Memory mapped timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer-mem".
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+- reg : The control frame base address.
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the CPU can address a frame's registers.
+
+A timer node has up to 8 frame sub-nodes, each with the following properties:
+
+- frame-number: 0 to 7.
+
+- interrupts : Interrupt list for physical and virtual timers in that order.
+  The virtual timer interrupt is optional.
+
+- reg : The first and second view base addresses in that order. The second view
+  base address is optional.
+
+- status : "disabled" indicates the frame is not available for use. Optional.
+
+Example:
+
+	timer@f0000000 {
+		compatible = "arm,armv7-timer-mem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0xf0000000 0x1000>;
+		clock-frequency = <50000000>;
+
+		frame@f0001000 {
+			frame-number = <0>
+			interrupts = <0 13 0x8>,
+				     <0 14 0x8>;
+			reg = <0xf0001000 0x1000>,
+			      <0xf0002000 0x1000>;
+		};
+
+		frame@f0003000 {
+			frame-number = <1>
+			interrupts = <0 15 0x8>;
+			reg = <0xf0003000 0x1000>;
+			status = "disabled";
+		};
+	};