Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 36 insertions, 0 deletions

diff --git a/dts/Bindings/ata/ahci-platform.txt b/dts/Bindings/ata/ahci-platform.txt
new file mode 100644
index 0000000000..48b285ffa3
--- /dev/null
+++ b/dts/Bindings/ata/ahci-platform.txt
@@ -0,0 +1,36 @@
+* AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, one of "snps,spear-ahci",
+                      "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+                      "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
+                      "fsl,imx6q-ahci" or "snps,dwc-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- clocks            : a list of phandle + clock specifier pairs
+- target-supply     : regulator for SATA target power
+
+"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
+- clocks            : must contain the sata, sata_ref and ahb clocks
+- clock-names       : must contain "ahb" for the ahb clock
+
+Examples:
+        sata@ffe08000 {
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+        };
+
+	ahci: sata@01c18000 {
+		compatible = "allwinner,sun4i-a10-ahci";
+		reg = <0x01c18000 0x1000>;
+		interrupts = <56>;
+		clocks = <&pll6 0>, <&ahb_gates 25>;
+		target-supply = <&reg_ahci_5v>;
+	};