dts: update to v5.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 46 deletions

diff --git a/dts/Bindings/clock/sifive/fu540-prci.txt b/dts/Bindings/clock/sifive/fu540-prci.txt
deleted file mode 100644
index 349808f4fb..0000000000
--- a/dts/Bindings/clock/sifive/fu540-prci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiFive FU540 PRCI bindings
-
-On the FU540 family of SoCs, most system-wide clock and reset integration
-is via the PRCI IP block.
-
-Required properties:
-- compatible: Should be "sifive,<chip>-prci".  Only one value is
-	supported: "sifive,fu540-c000-prci"
-- reg: Should describe the PRCI's register target physical address region
-- clocks: Should point to the hfclk device tree node and the rtcclk
-          device tree node.  The RTC clock here is not a time-of-day clock,
-	  but is instead a high-stability clock source for system timers
-	  and cycle counters.
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock via the clock ID
-macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
-These macros begin with PRCI_CLK_.
-
-The hfclk and rtcclk nodes are required, and represent physical
-crystals or resonators located on the PCB.  These nodes should be present
-underneath /, rather than /soc.
-
-Examples:
-
-/* under /, in PCB-specific DT data */
-hfclk: hfclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <33333333>;
-	clock-output-names = "hfclk";
-};
-rtcclk: rtcclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <1000000>;
-	clock-output-names = "rtcclk";
-};
-
-/* under /soc, in SoC-specific DT data */
-prci: clock-controller@10000000 {
-	compatible = "sifive,fu540-c000-prci";
-	reg = <0x0 0x10000000 0x0 0x1000>;
-	clocks = <&hfclk>, <&rtcclk>;
-	#clock-cells = <1>;
-};