Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 26 insertions, 0 deletions

diff --git a/dts/Bindings/clock/vf610-clock.txt b/dts/Bindings/clock/vf610-clock.txt
new file mode 100644
index 0000000000..c80863d344
--- /dev/null
+++ b/dts/Bindings/clock/vf610-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+	compatible = "fsl,vf610-ccm";
+	reg = <0x4006b000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@40028000 {
+	compatible = "fsl,vf610-uart";
+	reg = <0x40028000 0x1000>;
+	interrupts = <0 62 0x04>;
+	clocks = <&clks VF610_CLK_UART1>;
+	clock-names = "ipg";
+};