summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/fpga
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2017-10-06 06:12:41 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2017-10-06 06:12:41 +0200
commitebde8820a04dd73a09f50ba84b8cf8ec3773d6ba (patch)
tree031d15dcd26f5b737adddc5042a3ddabbb6051f7 /dts/Bindings/fpga
parent15af9fc8cc9e18409893d2375271d64cac76924a (diff)
downloadbarebox-ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba.tar.gz
dts: update to v4.14-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/fpga')
-rw-r--r--dts/Bindings/fpga/altera-passive-serial.txt29
-rw-r--r--dts/Bindings/fpga/xilinx-pr-decoupler.txt36
-rw-r--r--dts/Bindings/fpga/xilinx-slave-serial.txt1
3 files changed, 65 insertions, 1 deletions
diff --git a/dts/Bindings/fpga/altera-passive-serial.txt b/dts/Bindings/fpga/altera-passive-serial.txt
new file mode 100644
index 0000000..48478bc
--- /dev/null
+++ b/dts/Bindings/fpga/altera-passive-serial.txt
@@ -0,0 +1,29 @@
+Altera Passive Serial SPI FPGA Manager
+
+Altera FPGAs support a method of loading the bitstream over what is
+referred to as "passive serial".
+The passive serial link is not technically SPI, and might require extra
+circuits in order to play nicely with other SPI slaves on the same bus.
+
+See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+Required properties:
+- compatible: Must be one of the following:
+ "altr,fpga-passive-serial",
+ "altr,fpga-arria10-passive-serial"
+- reg: SPI chip select of the FPGA
+- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
+- nstat-gpios: status pin (referred to as nSTATUS in the manual)
+
+Optional properties:
+- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
+
+Example:
+ fpga: fpga@0 {
+ compatible = "altr,fpga-passive-serial";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ };
diff --git a/dts/Bindings/fpga/xilinx-pr-decoupler.txt b/dts/Bindings/fpga/xilinx-pr-decoupler.txt
new file mode 100644
index 0000000..8dcfba9
--- /dev/null
+++ b/dts/Bindings/fpga/xilinx-pr-decoupler.txt
@@ -0,0 +1,36 @@
+Xilinx LogiCORE Partial Reconfig Decoupler Softcore
+
+The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
+decouplers / fpga bridges.
+The controller can decouple/disable the bridges which prevents signal
+changes from passing through the bridge. The controller can also
+couple / enable the bridges which allows traffic to pass through the
+bridge normally.
+
+The Driver supports only MMIO handling. A PR region can have multiple
+PR Decouplers which can be handled independently or chained via decouple/
+decouple_status signals.
+
+Required properties:
+- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by
+ "xlnx,pr-decoupler"
+- regs : base address and size for decoupler module
+- clocks : input clock to IP
+- clock-names : should contain "aclk"
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
+
+Example:
+ fpga-bridge@100000450 {
+ compatible = "xlnx,pr-decoupler-1.00",
+ "xlnx-pr-decoupler";
+ regs = <0x10000045 0x10>;
+ clocks = <&clkc 15>;
+ clock-names = "aclk";
+ bridge-enable = <0>;
+ };
diff --git a/dts/Bindings/fpga/xilinx-slave-serial.txt b/dts/Bindings/fpga/xilinx-slave-serial.txt
index 9766f74..cfa4ed4 100644
--- a/dts/Bindings/fpga/xilinx-slave-serial.txt
+++ b/dts/Bindings/fpga/xilinx-slave-serial.txt
@@ -31,7 +31,6 @@ Example for full FPGA configuration:
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
- status = "okay";
fpga_mgr_spi: fpga-mgr@0 {
compatible = "xlnx,fpga-slave-serial";