Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 25 insertions, 0 deletions

diff --git a/dts/Bindings/gpio/gpio-fan.txt b/dts/Bindings/gpio/gpio-fan.txt
new file mode 100644
index 0000000000..2dd457a346
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-fan.txt
@@ -0,0 +1,25 @@
+Bindings for fan connected to GPIO lines
+
+Required properties:
+- compatible : "gpio-fan"
+- gpios: Specifies the pins that map to bits in the control value,
+  ordered MSB-->LSB.
+- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
+  control value that should be set to achieve them. This array
+  must have the RPM values in ascending order.
+
+Optional properties:
+- alarm-gpios: This pin going active indicates something is wrong with
+  the fan, and a udev event will be fired.
+
+Examples:
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+		alarm-gpios = <&gpio1 15 1>;
+	};