dts: update to v5.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

8 files changed, 229 insertions, 123 deletions

diff --git a/dts/Bindings/iio/health/afe4403.txt b/dts/Bindings/iio/health/afe4403.txt
deleted file mode 100644
index 8e412054d6..0000000000
--- a/dts/Bindings/iio/health/afe4403.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Texas Instruments AFE4403 Heart rate and Pulse Oximeter
-
-Required properties:
- - compatible		: Should be "ti,afe4403".
- - reg			: SPI chip select address of device.
- - tx-supply		: Regulator supply to transmitting LEDs.
- - interrupts		: The interrupt line the device ADC_RDY pin is
-			  connected to. For details refer to,
-			  ../../interrupt-controller/interrupts.txt.
-
-Optional properties:
- - reset-gpios		: GPIO used to reset the device.
-			  For details refer to, ../../gpio/gpio.txt.
-
-For other required and optional properties of SPI slave nodes
-please refer to ../../spi/spi-bus.txt.
-
-Example:
-
-&spi0 {
-	heart_mon@0 {
-		compatible = "ti,afe4403";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		tx-supply = <&vbat>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/dts/Bindings/iio/health/afe4404.txt b/dts/Bindings/iio/health/afe4404.txt
deleted file mode 100644
index 0b52830a0d..0000000000
--- a/dts/Bindings/iio/health/afe4404.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Texas Instruments AFE4404 Heart rate and Pulse Oximeter
-
-Required properties:
- - compatible		: Should be "ti,afe4404".
- - reg			: I2C address of the device.
- - tx-supply		: Regulator supply to transmitting LEDs.
- - interrupts		: The interrupt line the device ADC_RDY pin is
-			  connected to. For details refer to,
-			  ../interrupt-controller/interrupts.txt.
-
-Optional properties:
- - reset-gpios		: GPIO used to reset the device.
-			  For details refer to, ../gpio/gpio.txt.
-
-Example:
-
-&i2c2 {
-	heart_mon@58 {
-		compatible = "ti,afe4404";
-		reg = <0x58>;
-
-		tx-supply = <&vbat>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/dts/Bindings/iio/health/max30100.txt b/dts/Bindings/iio/health/max30100.txt
deleted file mode 100644
index 0054908a6e..0000000000
--- a/dts/Bindings/iio/health/max30100.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Maxim MAX30100 heart rate and pulse oximeter sensor
-
-* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf
-
-Required properties:
-  - compatible: must be "maxim,max30100"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic
-  interrupt client node bindings.
-
-Optional properties:
-  - maxim,led-current-microamp: configuration for LED current in microamperes
-    while the engine is running. First indexed value is the configuration for
-    the RED LED, and second value is for the IR LED.
-
-    Refer to the datasheet for the allowed current values.
-
-Example:
-
-max30100@57 {
-	compatible = "maxim,max30100";
-	reg = <0x57>;
-	maxim,led-current-microamp = <24000 50000>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/dts/Bindings/iio/health/max30102.txt b/dts/Bindings/iio/health/max30102.txt
deleted file mode 100644
index 7ef7ae40ae..0000000000
--- a/dts/Bindings/iio/health/max30102.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Maxim MAX30102 heart rate and pulse oximeter sensor
-Maxim MAX30105 optical particle-sensing module
-
-* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
-* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
-
-Required properties:
-  - compatible: must be "maxim,max30102" or "maxim,max30105"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic
-  interrupt client node bindings.
-
-Optional properties:
-  - maxim,red-led-current-microamp: configuration for red LED current
-  - maxim,ir-led-current-microamp: configuration for IR LED current
-  - maxim,green-led-current-microamp: configuration for green LED current
-    (max30105 only)
-
-    Note that each step is approximately 200 microamps, ranging from 0 uA to
-    50800 uA.
-
-Example:
-
-max30102@57 {
-	compatible = "maxim,max30102";
-	reg = <0x57>;
-	maxim,red-led-current-microamp = <7000>;
-	maxim,ir-led-current-microamp = <7000>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/dts/Bindings/iio/health/maxim,max30100.yaml b/dts/Bindings/iio/health/maxim,max30100.yaml
new file mode 100644
index 0000000000..64b8626370
--- /dev/null
+++ b/dts/Bindings/iio/health/maxim,max30100.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30100 heart rate and pulse oximeter sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    const: maxim,max30100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,led-current-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      LED current whilst the engine is running. First indexed value is
+      the configuration for the RED LED, and second value is for the IR LED.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30100";
+            reg = <0x57>;
+            maxim,led-current-microamp = <24000 50000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/health/maxim,max30102.yaml b/dts/Bindings/iio/health/maxim,max30102.yaml
new file mode 100644
index 0000000000..c13c10c8d6
--- /dev/null
+++ b/dts/Bindings/iio/health/maxim,max30102.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max30102
+      - maxim,max30105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,red-led-current-microamp:
+    description: RED LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,ir-led-current-microamp:
+    description: IR LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,green-led-current-microamp:
+    description: Green LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max30100
+    then:
+      properties:
+        maxim,green-led-current-microamp: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30102";
+            reg = <0x57>;
+            maxim,red-led-current-microamp = <7000>;
+            maxim,ir-led-current-microamp = <7000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/health/ti,afe4403.yaml b/dts/Bindings/iio/health/ti,afe4403.yaml
new file mode 100644
index 0000000000..d861526c5c
--- /dev/null
+++ b/dts/Bindings/iio/health/ti,afe4403.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4403 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4403
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios: true
+
+  spi-max-frequency: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart_mon@0 {
+            compatible = "ti,afe4403";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/health/ti,afe4404.yaml b/dts/Bindings/iio/health/ti,afe4404.yaml
new file mode 100644
index 0000000000..3b4d6c48b8
--- /dev/null
+++ b/dts/Bindings/iio/health/ti,afe4404.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4403
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart_mon@58 {
+            compatible = "ti,afe4404";
+            reg = <0x58>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...