dts: update to v5.9-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

35 files changed, 789 insertions, 367 deletions

diff --git a/dts/Bindings/iio/accel/adi,adxl345.yaml b/dts/Bindings/iio/accel/adi,adxl345.yaml
index d124eba1ce..fd4eaa3d0a 100644
--- a/dts/Bindings/iio/accel/adi,adxl345.yaml
+++ b/dts/Bindings/iio/accel/adi,adxl345.yaml
@@ -12,8 +12,8 @@ maintainers:
 description: |
   Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
   both I2C & SPI interfaces.
-    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
 
 properties:
   compatible:
diff --git a/dts/Bindings/iio/accel/kionix,kxsd9.txt b/dts/Bindings/iio/accel/kionix,kxsd9.txt
deleted file mode 100644
index b25bf3a77e..0000000000
--- a/dts/Bindings/iio/accel/kionix,kxsd9.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Kionix KXSD9 Accelerometer device tree bindings
-
-Required properties:
- - compatible: 		should be set to "kionix,kxsd9"
- - reg:			i2c slave address
-
-Optional properties:
- - vdd-supply:		The input supply for VDD
- - iovdd-supply:	The input supply for IOVDD
- - interrupts:		The movement detection interrupt
- - mount-matrix:	See mount-matrix.txt
-
-Example:
-
-kxsd9@18 {
-	compatible = "kionix,kxsd9";
-	reg = <0x18>;
-	interrupt-parent = <&foo>;
-	interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-	iovdd-supply = <&bar>;
-	vdd-supply = <&baz>;
-};
diff --git a/dts/Bindings/iio/accel/kionix,kxsd9.yaml b/dts/Bindings/iio/accel/kionix,kxsd9.yaml
new file mode 100644
index 0000000000..d61ab4fa3d
--- /dev/null
+++ b/dts/Bindings/iio/accel/kionix,kxsd9.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXSD9 Accelerometer
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  3 axis 12 bit accelerometer with +-8G range on all axes. Also has a
+  12 bit auxiliary ADC channel. Interface is either SPI or I2C.
+
+properties:
+  compatible:
+    const: kionix,kxsd9
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@18 {
+            compatible = "kionix,kxsd9";
+            reg = <0x18>;
+            iovdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            mount-matrix = "-0.984807753012208", "0",  "-0.173648177666930",
+                           "0",                  "-1", "0",
+                           "-0.173648177666930", "0",  "0.984807753012208";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "kionix,kxsd9";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/adc/adi,ad7606.yaml b/dts/Bindings/iio/adc/adi,ad7606.yaml
index 5117ad68a5..cbb8819d70 100644
--- a/dts/Bindings/iio/adc/adi,ad7606.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7606.yaml
@@ -53,10 +53,10 @@ properties:
 
   standby-gpios:
     description:
-       Must be the device tree identifier of the STBY pin. This pin is used
-       to place the AD7606 into one of two power-down modes, Standby mode or
-       Shutdown mode. As the line is active low, it should be marked
-       GPIO_ACTIVE_LOW.
+      Must be the device tree identifier of the STBY pin. This pin is used
+      to place the AD7606 into one of two power-down modes, Standby mode or
+      Shutdown mode. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
     maxItems: 1
 
   adi,first-data-gpios:
diff --git a/dts/Bindings/iio/adc/ingenic,adc.txt b/dts/Bindings/iio/adc/ingenic,adc.txt
deleted file mode 100644
index cd9048cf9d..0000000000
--- a/dts/Bindings/iio/adc/ingenic,adc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Ingenic JZ47xx ADC controller IIO bindings
-
-Required properties:
-
-- compatible: Should be one of:
-  * ingenic,jz4725b-adc
-  * ingenic,jz4740-adc
-  * ingenic,jz4770-adc
-- reg: ADC controller registers location and length.
-- clocks: phandle to the SoC's ADC clock.
-- clock-names: Must be set to "adc".
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
-  by index.
-
-ADC clients must use the format described in iio-bindings.txt, giving
-a phandle and IIO specifier pair ("io-channels") to the ADC controller.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-adc: adc@10070000 {
-	compatible = "ingenic,jz4740-adc";
-	#io-channel-cells = <1>;
-
-	reg = <0x10070000 0x30>;
-
-	clocks = <&cgu JZ4740_CLK_ADC>;
-	clock-names = "adc";
-
-	interrupt-parent = <&intc>;
-	interrupts = <18>;
-};
-
-adc-keys {
-	...
-	compatible = "adc-keys";
-	io-channels = <&adc INGENIC_ADC_AUX>;
-	io-channel-names = "buttons";
-	...
-};
-
-battery {
-	...
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	...
-};
diff --git a/dts/Bindings/iio/adc/ingenic,adc.yaml b/dts/Bindings/iio/adc/ingenic,adc.yaml
new file mode 100644
index 0000000000..9f414dbdae
--- /dev/null
+++ b/dts/Bindings/iio/adc/ingenic,adc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx ADC controller IIO bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Industrial I/O subsystem bindings for ADC controller found in
+  Ingenic JZ47xx SoCs.
+
+  ADC clients must use the format described in iio-bindings.txt, giving
+  a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4725b-adc
+      - ingenic,jz4740-adc
+      - ingenic,jz4770-adc
+
+  '#io-channel-cells':
+    const: 1
+    description:
+      Must be set to <1> to indicate channels are selected by index.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    adc@10070000 {
+            compatible = "ingenic,jz4740-adc";
+            #io-channel-cells = <1>;
+
+            reg = <0x10070000 0x30>;
+
+            clocks = <&cgu JZ4740_CLK_ADC>;
+            clock-names = "adc";
+
+            interrupt-parent = <&intc>;
+            interrupts = <18>;
+    };
diff --git a/dts/Bindings/iio/adc/maxim,max1238.yaml b/dts/Bindings/iio/adc/maxim,max1238.yaml
index a0ebb46801..cccd3033a5 100644
--- a/dts/Bindings/iio/adc/maxim,max1238.yaml
+++ b/dts/Bindings/iio/adc/maxim,max1238.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-   Family of simple ADCs with i2c inteface and internal references.
+  Family of simple ADCs with i2c inteface and internal references.
 
 properties:
   compatible:
diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
deleted file mode 100644
index c878768812..0000000000
--- a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
+++ /dev/null
@@ -1,173 +0,0 @@
-Qualcomm's SPMI PMIC ADC
-
-- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
-  voltage. The VADC is a 15-bit sigma-delta ADC.
-- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
-  voltage. The VADC is a 16-bit sigma-delta ADC.
-
-VADC node:
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,spmi-vadc".
-                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
-                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
-                Should contain "qcom,pms405-adc" for PMS405 PMIC
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: VADC base address in the SPMI PMIC register map.
-
-- #address-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. Child node 'reg' property should define ADC
-            channel number.
-
-- #size-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be zero.
-
-- #io-channel-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. For details about IIO bindings see:
-            Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-- interrupts:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: End of conversion interrupt.
-
-Channel node properties:
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: ADC channel number.
-            See include/dt-bindings/iio/qcom,spmi-vadc.h
-
-- label:
-    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
-    Value type: <empty>
-    Definition: ADC input of the platform as seen in the schematics.
-            For thermistor inputs connected to generic AMUX or GPIO inputs
-            these can vary across platform for the same pins. Hence select
-            the platform schematics name for this channel.
-
-- qcom,decimation:
-    Usage: optional
-    Value type: <u32>
-    Definition: This parameter is used to decrease ADC sampling rate.
-            Quicker measurements can be made by reducing decimation ratio.
-            - For compatible property "qcom,spmi-vadc", valid values are
-              512, 1024, 2048, 4096. If property is not found, default value
-              of 512 will be used.
-            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
-              and 840. If property is not found, default value of 840 is used.
-            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
-              512 and 1024. If property is not present, default value is 1024.
-
-- qcom,pre-scaling:
-    Usage: optional
-    Value type: <u32 array>
-    Definition: Used for scaling the channel input signal before the signal is
-            fed to VADC. The configuration for this node is to know the
-            pre-determined ratio and use it for post scaling. Select one from
-            the following options.
-            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
-            If property is not found default value depending on chip will be used.
-
-- qcom,ratiometric:
-    Usage: optional
-    Value type: <empty>
-    Definition: Channel calibration type.
-            - For compatible property "qcom,spmi-vadc", if this property is
-              specified VADC will use the VDD reference (1.8V) and GND for
-              channel calibration. If property is not found, channel will be
-              calibrated with 0.625V and 1.25V reference channels, also
-              known as absolute calibration.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              if this property is specified VADC will use the VDD reference
-              (1.875V) and GND for channel calibration. If property is not found,
-              channel will be calibrated with 0V and 1.25V reference channels,
-              also known as absolute calibration.
-
-- qcom,hw-settle-time:
-    Usage: optional
-    Value type: <u32>
-    Definition: Time between AMUX getting configured and the ADC starting
-            conversion. The 'hw_settle_time' is an index used from valid values
-            and programmed in hardware to achieve the hardware settling delay.
-            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
-              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
-              and 2ms * (hw_settle_time - 10) otherwise.
-              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms.
-              If property is not found, channel will use 0us.
-            - For compatible property "qcom,spmi-adc5", delay = 15us for
-              value 0, 100us * (value) for values < 11,
-              and 2ms * (value - 10) otherwise.
-              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms
-              Certain controller digital versions have valid values of
-              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
-              If property is not found, channel will use 15us.
-
-- qcom,avg-samples:
-    Usage: optional
-    Value type: <u32>
-    Definition: Number of samples to be used for measurement.
-            Averaging provides the option to obtain a single measurement
-            from the ADC that is an average of multiple samples. The value
-            selected is 2^(value).
-            - For compatible property "qcom,spmi-vadc", valid values
-              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
-              If property is not found, 1 sample will be used.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              valid values are: 1, 2, 4, 8, 16
-              If property is not found, 1 sample will be used.
-
-NOTE:
-
-For compatible property "qcom,spmi-vadc" following channels, also known as
-reference point channels, are used for result calibration and their channel
-configuration nodes should be defined:
-VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
-VADC_GND_REF and VADC_VDD_VADC.
-
-Example:
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <linux/irq.h>
-/* ... */
-
-	/* VADC node */
-	pmic_vadc: vadc@3100 {
-		compatible = "qcom,spmi-vadc";
-		reg = <0x3100>;
-		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-
-		/* Channel node */
-		adc-chan@VADC_LR_MUX10_USB_ID {
-			reg = <VADC_LR_MUX10_USB_ID>;
-			qcom,decimation = <512>;
-			qcom,ratiometric;
-			qcom,hw-settle-time = <200>;
-			qcom,avg-samples = <1>;
-			qcom,pre-scaling = <1 3>;
-		};
-	};
-
-	/* IIO client node */
-	usb {
-		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
-		io-channel-names = "vadc";
-	};
diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml
new file mode 100644
index 0000000000..0ca992465a
--- /dev/null
+++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+  voltage. The VADC is a 15-bit sigma-delta ADC.
+  SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
+  voltage. The VADC is a 16-bit sigma-delta ADC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,pms405-adc
+          - const: qcom,spmi-adc-rev2
+
+      - items:
+          - enum:
+              - qcom,spmi-vadc
+              - qcom,spmi-adc5
+              - qcom,spmi-adc-rev2
+              - qcom,spmi-adc7
+
+  reg:
+    description: VADC base address in the SPMI PMIC register map
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#io-channel-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#io-channel-cells'
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+      For compatible property "qcom,spmi-vadc" following channels, also known as
+      reference point channels, are used for result calibration and their channel
+      configuration nodes should be defined:
+      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+      VADC_GND_REF and VADC_VDD_VADC.
+
+    properties:
+      reg:
+        description: |
+          ADC channel number.
+          See include/dt-bindings/iio/qcom,spmi-vadc.h
+          For PMIC7 ADC, the channel numbers are specified separately per PMIC
+          in the PMIC-specific files in include/dt-bindings/iio/.
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+            ADC input of the platform as seen in the schematics.
+            For thermistor inputs connected to generic AMUX or GPIO inputs
+            these can vary across platform for the same pins. Hence select
+            the platform schematics name for this channel.
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+
+      qcom,pre-scaling:
+        description: |
+            Used for scaling the channel input signal before the signal is
+            fed to VADC. The configuration for this node is to know the
+            pre-determined ratio and use it for post scaling. It is a pair of
+            integers, denoting the numerator and denominator of the fraction by which
+            input signal is multiplied. For example, <1 3> indicates the signal is scaled
+            down to 1/3 of its value before ADC measurement.
+            If property is not found default value depending on chip will be used.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 1
+              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+          - items:
+              - const: 10
+              - const: 81
+
+      qcom,ratiometric:
+        description: |
+            Channel calibration type.
+            - For compatible property "qcom,spmi-vadc", if this property is
+              specified VADC will use the VDD reference (1.8V) and GND for
+              channel calibration. If property is not found, channel will be
+              calibrated with 0.625V and 1.25V reference channels, also
+              known as absolute calibration.
+            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
+              "qcom,spmi-adc-rev2", if this property is specified VADC will use
+              the VDD reference (1.875V) and GND for channel calibration. If
+              property is not found, channel will be calibrated with 0V and 1.25V
+              reference channels, also known as absolute calibration.
+        type: boolean
+
+      qcom,hw-settle-time:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Time between AMUX getting configured and the ADC starting
+            conversion. The 'hw_settle_time' is an index used from valid values
+            and programmed in hardware to achieve the hardware settling delay.
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Number of samples to be used for measurement.
+            Averaging provides the option to obtain a single measurement
+            from the ADC that is an average of multiple samples. The value
+            selected is 2^(value).
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-vadc
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 512, 1024, 2048, 4096 ]
+              default: 512
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-rev2
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 256, 512, 1024 ]
+              default: 1024
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc5
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 250, 420, 840 ]
+              default: 840
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10, 16, 32, 64, 128 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc7
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 85, 340, 1360 ]
+              default: 1360
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000,
+                      8000, 16000, 32000, 64000, 128000 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+examples:
+  - |
+    spmi_bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      /* VADC node */
+      pmic_vadc: adc@3100 {
+        compatible = "qcom,spmi-vadc";
+        reg = <0x3100>;
+        interrupts = <0x0 0x31 0x0 0x1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #io-channel-cells = <1>;
+        io-channel-ranges;
+
+        /* Channel node */
+        adc-chan@39 {
+          reg = <0x39>;
+          qcom,decimation = <512>;
+          qcom,ratiometric;
+          qcom,hw-settle-time = <200>;
+          qcom,avg-samples = <1>;
+          qcom,pre-scaling = <1 3>;
+        };
+
+        adc-chan@9 {
+          reg = <0x9>;
+        };
+
+        adc-chan@a {
+          reg = <0xa>;
+        };
+
+        adc-chan@e {
+          reg = <0xe>;
+        };
+
+        adc-chan@f {
+          reg = <0xf>;
+        };
+      };
+    };
diff --git a/dts/Bindings/iio/adc/rockchip-saradc.yaml b/dts/Bindings/iio/adc/rockchip-saradc.yaml
index bcff82a423..1bb7619778 100644
--- a/dts/Bindings/iio/adc/rockchip-saradc.yaml
+++ b/dts/Bindings/iio/adc/rockchip-saradc.yaml
@@ -17,10 +17,10 @@ properties:
       - const: rockchip,rk3399-saradc
       - items:
           - enum:
-            - rockchip,px30-saradc
-            - rockchip,rk3308-saradc
-            - rockchip,rk3328-saradc
-            - rockchip,rv1108-saradc
+              - rockchip,px30-saradc
+              - rockchip,rk3308-saradc
+              - rockchip,rk3328-saradc
+              - rockchip,rv1108-saradc
           - const: rockchip,rk3399-saradc
 
   reg:
diff --git a/dts/Bindings/iio/adc/ti,ads8688.yaml b/dts/Bindings/iio/adc/ti,ads8688.yaml
new file mode 100644
index 0000000000..97fe6cbb2e
--- /dev/null
+++ b/dts/Bindings/iio/adc/ti,ads8688.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+   SPI 16bit ADCs with 4/8 channels.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads8684
+      - ti,ads8688
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: Optional external reference.  If not supplied, assume
+      REFSEL input tied low to enable the internal reference.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8688";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/adc/ti-ads8688.txt b/dts/Bindings/iio/adc/ti-ads8688.txt
deleted file mode 100644
index a02337d7ef..0000000000
--- a/dts/Bindings/iio/adc/ti-ads8688.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Texas Instruments' ADS8684 and ADS8688 ADC chip
-
-Required properties:
- - compatible: Should be "ti,ads8684" or "ti,ads8688"
- - reg: spi chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-adc@0 {
-	compatible = "ti,ads8688";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml
index 1c6d49685e..5342360e96 100644
--- a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: HMC425A 6-bit Digital Step Attenuator
 
 maintainers:
-- Michael Hennerich <michael.hennerich@analog.com>
-- Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Digital Step Attenuator IIO device with gpio interface.
diff --git a/dts/Bindings/iio/chemical/atlas,sensor.yaml b/dts/Bindings/iio/chemical/atlas,sensor.yaml
index 69e8931e0a..9a89b34bdd 100644
--- a/dts/Bindings/iio/chemical/atlas,sensor.yaml
+++ b/dts/Bindings/iio/chemical/atlas,sensor.yaml
@@ -31,10 +31,10 @@ properties:
       - atlas,co2-ezo
 
   reg:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
-     maxItems: 1
+    maxItems: 1
 
 required:
   - compatible
diff --git a/dts/Bindings/iio/chemical/sensirion,scd30.yaml b/dts/Bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 0000000000..40d87346ff
--- /dev/null
+++ b/dts/Bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd30
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  sensirion,sel-gpios:
+    description: GPIO connected to the SEL line
+    maxItems: 1
+
+  sensirion,pwm-gpios:
+    description: GPIO connected to the PWM line
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@61 {
+        compatible = "sensirion,scd30";
+        reg = <0x61>;
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    serial {
+      co2-sensor {
+        compatible = "sensirion,scd30";
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/iio/dac/adi,ad5770r.yaml b/dts/Bindings/iio/dac/adi,ad5770r.yaml
index 58d81ca434..82424e06be 100644
--- a/dts/Bindings/iio/dac/adi,ad5770r.yaml
+++ b/dts/Bindings/iio/dac/adi,ad5770r.yaml
@@ -61,17 +61,17 @@ properties:
         const: 0
 
       adi,range-microamp:
-          description: Output range of the channel.
-          oneOf:
-            - items:
-                - const: 0
-                - const: 300000
-            - items:
-                - const: -60000
-                - const: 0
-            - items:
-                - const: -60000
-                - const: 300000
+        description: Output range of the channel.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 300000
+          - items:
+              - const: -60000
+              - const: 0
+          - items:
+              - const: -60000
+              - const: 300000
 
   channel@1:
     description: Represents an external channel which are
@@ -84,10 +84,10 @@ properties:
         const: 1
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 140000, 250000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [140000, 250000]
 
   channel@2:
     description: Represents an external channel which are
@@ -100,10 +100,10 @@ properties:
         const: 2
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 55000, 150000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [55000, 150000]
 
 patternProperties:
   "^channel@([3-5])$":
@@ -116,19 +116,19 @@ patternProperties:
         maximum: 5
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 45000, 100000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [45000, 100000]
 
 required:
-- reg
-- channel@0
-- channel@1
-- channel@2
-- channel@3
-- channel@4
-- channel@5
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
 
 examples:
   - |
diff --git a/dts/Bindings/iio/dac/ti,dac7612.txt b/dts/Bindings/iio/dac/ti,dac7612.txt
index 639c94ed83..17af395b99 100644
--- a/dts/Bindings/iio/dac/ti,dac7612.txt
+++ b/dts/Bindings/iio/dac/ti,dac7612.txt
@@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
 
 The internal DACs are loaded when the LOADDACS pin is pulled down.
 
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+https://www.ti.com/lit/ds/sbas106/sbas106.pdf
 
 Required Properties:
 - compatible: Should be one of:
diff --git a/dts/Bindings/iio/iio-bindings.txt b/dts/Bindings/iio/iio-bindings.txt
index af33267727..aa63cac732 100644
--- a/dts/Bindings/iio/iio-bindings.txt
+++ b/dts/Bindings/iio/iio-bindings.txt
@@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
 output on a device. The length of an IIO specifier is defined by the
 value of a #io-channel-cells property in the IIO provider node.
 
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
 
 ==IIO providers==
 
diff --git a/dts/Bindings/iio/imu/bosch,bmi160.yaml b/dts/Bindings/iio/imu/bosch,bmi160.yaml
index 0d0ef84e22..33d8e9fd14 100644
--- a/dts/Bindings/iio/imu/bosch,bmi160.yaml
+++ b/dts/Bindings/iio/imu/bosch,bmi160.yaml
@@ -37,6 +37,15 @@ properties:
       set if the specified interrupt pin should be configured as
       open drain. If not set, defaults to push-pull.
 
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  vddio-supply:
+    description: provide VDD IO power to the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix
+
 required:
   - compatible
   - reg
@@ -52,9 +61,14 @@ examples:
         bmi160@68 {
                 compatible = "bosch,bmi160";
                 reg = <0x68>;
+                vdd-supply = <&pm8916_l17>;
+                vddio-supply = <&pm8916_l6>;
                 interrupt-parent = <&gpio4>;
                 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
                 interrupt-names = "INT1";
+                mount-matrix = "0", "1", "0",
+                               "-1", "0", "0",
+                               "0", "0", "1";
         };
     };
   - |
diff --git a/dts/Bindings/iio/imu/invensense,icm42600.yaml b/dts/Bindings/iio/imu/invensense,icm42600.yaml
new file mode 100644
index 0000000000..abd8d25e11
--- /dev/null
+++ b/dts/Bindings/iio/imu/invensense,icm42600.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-426xx Inertial Measurement Unit
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+  accelerometer.
+
+  It has a configurable host interface that supports I3C, I2C and SPI serial
+  communication, features a 2kB FIFO and 2 programmable interrupts with
+  ultra-low-power wake-on-motion support to minimize system power consumption.
+
+  Other industry-leading features include InvenSense on-chip APEX Motion
+  Processing engine for gesture recognition, activity classification, and
+  pedometer, along with programmable digital filters, and an embedded
+  temperature sensor.
+
+  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
+
+properties:
+  compatible:
+    enum:
+      - invensense,icm42600
+      - invensense,icm42602
+      - invensense,icm42605
+      - invensense,icm42622
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42605@68 {
+          compatible = "invensense,icm42605";
+          reg = <0x68>;
+          interrupt-parent = <&gpio2>;
+          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+          vdd-supply = <&vdd>;
+          vddio-supply = <&vddio>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42602@0 {
+          compatible = "invensense,icm42602";
+          reg = <0>;
+          spi-max-frequency = <24000000>;
+          spi-cpha;
+          spi-cpol;
+          interrupt-parent = <&gpio1>;
+          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+          vdd-supply = <&vdd>;
+          vddio-supply = <&vddio>;
+        };
+    };
diff --git a/dts/Bindings/iio/light/apds9300.txt b/dts/Bindings/iio/light/apds9300.txt
index aa199e09a4..3aa6db3ee9 100644
--- a/dts/Bindings/iio/light/apds9300.txt
+++ b/dts/Bindings/iio/light/apds9300.txt
@@ -1,6 +1,6 @@
 * Avago APDS9300 ambient light sensor
 
-http://www.avagotech.com/docs/AV02-1077EN
+https://www.avagotech.com/docs/AV02-1077EN
 
 Required properties:
 
diff --git a/dts/Bindings/iio/light/apds9960.txt b/dts/Bindings/iio/light/apds9960.txt
index 3af325ad19..c53ddb81c4 100644
--- a/dts/Bindings/iio/light/apds9960.txt
+++ b/dts/Bindings/iio/light/apds9960.txt
@@ -1,6 +1,6 @@
 * Avago APDS9960 gesture/RGB/ALS/proximity sensor
 
-http://www.avagotech.com/docs/AV02-4191EN
+https://www.avagotech.com/docs/AV02-4191EN
 
 Required properties:
 
diff --git a/dts/Bindings/iio/light/opt3001.txt b/dts/Bindings/iio/light/opt3001.txt
index 47b13eb8f4..9e6f2998e7 100644
--- a/dts/Bindings/iio/light/opt3001.txt
+++ b/dts/Bindings/iio/light/opt3001.txt
@@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
 requires the use of interrupts. Without interrupts, only the simple reading
 of the current light value is supported through the IIO API.
 
-http://www.ti.com/product/opt3001
+https://www.ti.com/product/opt3001
 
 Required properties:
   - compatible: should be "ti,opt3001"
diff --git a/dts/Bindings/iio/light/vishay,vcnl4000.yaml b/dts/Bindings/iio/light/vishay,vcnl4000.yaml
index da8f2e8725..58887a4f9c 100644
--- a/dts/Bindings/iio/light/vishay,vcnl4000.yaml
+++ b/dts/Bindings/iio/light/vishay,vcnl4000.yaml
@@ -36,15 +36,15 @@ required:
 additionalProperties: false
 
 examples:
-- |
-  i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      light-sensor@51 {
-              compatible = "vishay,vcnl4200";
-              reg = <0x51>;
-              proximity-near-level = <220>;
-      };
-  };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@51 {
+            compatible = "vishay,vcnl4200";
+            reg = <0x51>;
+            proximity-near-level = <220>;
+        };
+    };
 ...
diff --git a/dts/Bindings/iio/light/vl6180.txt b/dts/Bindings/iio/light/vl6180.txt
index 2c52952715..fb9137d85d 100644
--- a/dts/Bindings/iio/light/vl6180.txt
+++ b/dts/Bindings/iio/light/vl6180.txt
@@ -1,6 +1,6 @@
 STMicro VL6180 -  ALS, range and proximity sensor
 
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
 
 Required properties:
 
diff --git a/dts/Bindings/iio/magnetometer/ak8975.txt b/dts/Bindings/iio/magnetometer/ak8975.txt
deleted file mode 100644
index aa67ceb0d4..0000000000
--- a/dts/Bindings/iio/magnetometer/ak8975.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* AsahiKASEI AK8975 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "asahi-kasei,ak8975"
-  - reg : the I2C address of the magnetometer
-
-Optional properties:
-
-  - gpios : should be device tree identifier of the magnetometer DRDY pin
-  - vdd-supply: an optional regulator that needs to be on to provide VDD
-  - mount-matrix: an optional 3x3 mounting rotation matrix
-
-Example:
-
-ak8975@c {
-        compatible = "asahi-kasei,ak8975";
-        reg = <0x0c>;
-        gpios = <&gpj0 7 0>;
-        vdd-supply = <&ldo_3v3_gnss>;
-        mount-matrix = "-0.984807753012208",  /* x0 */
-                       "0",                   /* y0 */
-                       "-0.173648177666930",  /* z0 */
-                       "0",                   /* x1 */
-                       "-1",                  /* y1 */
-                       "0",                   /* z1 */
-                       "-0.173648177666930",  /* x2 */
-                       "0",                   /* y2 */
-                       "0.984807753012208";   /* z2 */
-};
diff --git a/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
new file mode 100644
index 0000000000..f0b336ac39
--- /dev/null
+++ b/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AsahiKASEI AK8975 magnetometer sensor
+
+maintainers:
+  - Jonathan Albrieux <jonathan.albrieux@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - asahi-kasei,ak8975
+          - asahi-kasei,ak8963
+          - asahi-kasei,ak09911
+          - asahi-kasei,ak09912
+      - enum:
+          - ak8975
+          - ak8963
+          - ak09911
+          - ak09912
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description: |
+      AK8975 has a "Data ready" pin (DRDY) which informs that data
+      is ready to be read and is possible to listen on it. If used,
+      this should be active high. Prefer interrupt over this.
+
+  interrupts:
+    maxItems: 1
+    description: interrupt for DRDY pin. Triggered on rising edge.
+
+  vdd-supply:
+    description: |
+      an optional regulator that needs to be on to provide VDD power to
+      the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  reset-gpios:
+    description: |
+      an optional pin needed for AK09911 to set the reset state. This should
+      be usually active low
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@c {
+            compatible = "asahi-kasei,ak8975";
+            reg = <0x0c>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&ldo_3v3_gnss>;
+            reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+        };
+    };
diff --git a/dts/Bindings/iio/magnetometer/bmc150_magn.txt b/dts/Bindings/iio/magnetometer/bmc150_magn.txt
index fd5fca90fb..22912e43b6 100644
--- a/dts/Bindings/iio/magnetometer/bmc150_magn.txt
+++ b/dts/Bindings/iio/magnetometer/bmc150_magn.txt
@@ -4,7 +4,11 @@ http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS00
 
 Required properties:
 
-  - compatible : should be "bosch,bmc150_magn"
+  - compatible : should be one of:
+                 "bosch,bmc150_magn"
+                 "bosch,bmc156_magn"
+                 "bosch,bmm150"
+                 "bosch,bmm150_magn" (DEPRECATED, use bosch,bmm150)
   - reg : the I2C address of the magnetometer
 
 Optional properties:
diff --git a/dts/Bindings/iio/multiplexer/io-channel-mux.txt b/dts/Bindings/iio/multiplexer/io-channel-mux.txt
index c827940025..89647d7143 100644
--- a/dts/Bindings/iio/multiplexer/io-channel-mux.txt
+++ b/dts/Bindings/iio/multiplexer/io-channel-mux.txt
@@ -21,7 +21,7 @@ controller state. The mux controller state is described in
 
 Example:
 	mux: mux-controller {
-		compatible = "mux-gpio";
+		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
 
 		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
diff --git a/dts/Bindings/iio/potentiometer/mcp41010.txt b/dts/Bindings/iio/potentiometer/mcp41010.txt
index 566711b995..4f245e8469 100644
--- a/dts/Bindings/iio/potentiometer/mcp41010.txt
+++ b/dts/Bindings/iio/potentiometer/mcp41010.txt
@@ -1,7 +1,7 @@
 * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
 
 Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
 
 The node for this driver must be a child node of a SPI controller, hence
 all mandatory properties described in
diff --git a/dts/Bindings/iio/potentiostat/lmp91000.txt b/dts/Bindings/iio/potentiostat/lmp91000.txt
index e6d0c2eb34..f3ab02b0dd 100644
--- a/dts/Bindings/iio/potentiostat/lmp91000.txt
+++ b/dts/Bindings/iio/potentiostat/lmp91000.txt
@@ -1,7 +1,7 @@
 * Texas Instruments LMP91000 series of potentiostats
 
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
+LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
 
 Required properties:
 
diff --git a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml
index 64c18f1693..be2be4b556 100644
--- a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml
@@ -13,7 +13,7 @@ description: |
   Bindings for the All Sensors DLH series pressure sensors.
 
   Specifications about the sensors can be found at:
-    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
 
 properties:
   compatible:
diff --git a/dts/Bindings/iio/proximity/devantech-srf04.yaml b/dts/Bindings/iio/proximity/devantech-srf04.yaml
index f86f8b23ef..ce79527983 100644
--- a/dts/Bindings/iio/proximity/devantech-srf04.yaml
+++ b/dts/Bindings/iio/proximity/devantech-srf04.yaml
@@ -17,9 +17,9 @@ description: |
     until it is received once again
 
   Specifications about the devices can be found at:
-  http://www.robot-electronics.co.uk/htm/srf04tech.htm
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
 
-  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
 
 properties:
   compatible:
diff --git a/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml b/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml
index 4190253336..51dba64037 100644
--- a/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml
+++ b/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -39,8 +39,8 @@ properties:
     description:
       The driver current for the LED used in proximity sensing.
     enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
-          100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
-          180000, 190000, 200000]
+           100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+           180000, 190000, 200000]
     default: 20000
 
 required:
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
index 40ccbe7b5c..0f79d9a01c 100644
--- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
@@ -307,7 +307,7 @@ patternProperties:
           mode.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
-          500000, 1000000]
+               500000, 1000000]
 
       adi,custom-thermistor:
         description: