dts: update to v5.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

30 files changed, 930 insertions, 280 deletions

diff --git a/dts/Bindings/iio/accel/bma180.txt b/dts/Bindings/iio/accel/bma180.txt
index f53237270b..33da4a6fdb 100644
--- a/dts/Bindings/iio/accel/bma180.txt
+++ b/dts/Bindings/iio/accel/bma180.txt
@@ -1,15 +1,21 @@
-* Bosch BMA180 / BMA25x triaxial acceleration sensor
+* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
 
+https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
 http://omapworld.com/BMA180_111_1002839.pdf
 http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
 
 Required properties:
 
   - compatible : should be one of:
+    "bosch,bma023"
+    "bosch,bma150"
     "bosch,bma180"
     "bosch,bma250"
     "bosch,bma254"
+    "bosch,smb380"
   - reg : the I2C address of the sensor
+  - vdd-supply : regulator phandle connected to the VDD pin
+  - vddio-supply : regulator phandle connected to the VDDIO pin
 
 Optional properties:
 
diff --git a/dts/Bindings/iio/adc/adi,ad7124.yaml b/dts/Bindings/iio/adc/adi,ad7124.yaml
index f0934b295e..deb34deff0 100644
--- a/dts/Bindings/iio/adc/adi,ad7124.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7124.yaml
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
@@ -83,9 +83,8 @@ patternProperties:
           1: REFIN2(+)/REFIN2(−).
           3: AVDD
           If this field is left empty, internal reference is selected.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 3]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt
diff --git a/dts/Bindings/iio/adc/adi,ad9467.yaml b/dts/Bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 0000000000..c4f57fa6aa
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 High-Speed ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9467
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad9467";
+          reg = <0>;
+          clocks = <&adc_clk>;
+          clock-names = "adc-clk";
+        };
+    };
+...
diff --git a/dts/Bindings/iio/adc/adi,axi-adc.yaml b/dts/Bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 0000000000..0924b2b497
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-adc@44a00000 {
+          compatible = "adi,axi-adc-10.0.a";
+          reg = <0x44a00000 0x10000>;
+          dmas = <&rx_dma 0>;
+          dma-names = "rx";
+
+          adi,adc-dev = <&spi_adc>;
+    };
+...
diff --git a/dts/Bindings/iio/adc/lltc,ltc2496.yaml b/dts/Bindings/iio/adc/lltc,ltc2496.yaml
index 118809a032..6a991e9f78 100644
--- a/dts/Bindings/iio/adc/lltc,ltc2496.yaml
+++ b/dts/Bindings/iio/adc/lltc,ltc2496.yaml
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <lars@metafoo.de>
- - Michael Hennerich <Michael.Hennerich@analog.com>
- - Stefan Popa <stefan.popa@analog.com>
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Stefan Popa <stefan.popa@analog.com>
 
 properties:
   compatible:
@@ -18,8 +18,7 @@ properties:
 
   vref-supply:
     description: phandle to an external regulator providing the reference voltage
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   reg:
     description: spi chipselect number according to the usual spi bindings
diff --git a/dts/Bindings/iio/adc/maxim,max1241.yaml b/dts/Bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 0000000000..f562505f5e
--- /dev/null
+++ b/dts/Bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 1>;
+        };
+    };
diff --git a/dts/Bindings/iio/adc/microchip,mcp3911.yaml b/dts/Bindings/iio/adc/microchip,mcp3911.yaml
index 8ffeceb6ab..95ab285f4e 100644
--- a/dts/Bindings/iio/adc/microchip,mcp3911.yaml
+++ b/dts/Bindings/iio/adc/microchip,mcp3911.yaml
@@ -38,10 +38,9 @@ properties:
 
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
 
   vref-supply:
     description: |
diff --git a/dts/Bindings/iio/adc/rockchip-saradc.txt b/dts/Bindings/iio/adc/rockchip-saradc.txt
deleted file mode 100644
index c2c50b5987..0000000000
--- a/dts/Bindings/iio/adc/rockchip-saradc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Rockchip Successive Approximation Register (SAR) A/D Converter bindings
-
-Required properties:
-- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
-   - "rockchip,saradc": for rk3188, rk3288
-   - "rockchip,rk3066-tsadc": for rk3036
-   - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
-   - "rockchip,rk3399-saradc": for rk3399
-   - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108
-
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
-               the peripheral clock.
-- vref-supply: The regulator supply ADC reference voltage.
-- #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names if need support
-	  this option. See ../reset/reset.txt for details.
-- reset-names: Must include the name "saradc-apb".
-
-Example:
-	saradc: saradc@2006c000 {
-		compatible = "rockchip,saradc";
-		reg = <0x2006c000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
-		clock-names = "saradc", "apb_pclk";
-		resets = <&cru SRST_SARADC>;
-		reset-names = "saradc-apb";
-		#io-channel-cells = <1>;
-		vref-supply = <&vcc18>;
-	};
diff --git a/dts/Bindings/iio/adc/rockchip-saradc.yaml b/dts/Bindings/iio/adc/rockchip-saradc.yaml
new file mode 100644
index 0000000000..bcff82a423
--- /dev/null
+++ b/dts/Bindings/iio/adc/rockchip-saradc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,saradc
+      - const: rockchip,rk3066-tsadc
+      - const: rockchip,rk3399-saradc
+      - items:
+          - enum:
+            - rockchip,px30-saradc
+            - rockchip,rk3308-saradc
+            - rockchip,rk3328-saradc
+            - rockchip,rv1108-saradc
+          - const: rockchip,rk3399-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: saradc
+      - const: apb_pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: saradc-apb
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    saradc: saradc@2006c000 {
+      compatible = "rockchip,saradc";
+      reg = <0x2006c000 0x100>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+      clock-names = "saradc", "apb_pclk";
+      resets = <&cru SRST_SARADC>;
+      reset-names = "saradc-apb";
+      vref-supply = <&vcc18>;
+      #io-channel-cells = <1>;
+    };
diff --git a/dts/Bindings/iio/adc/st,stm32-adc.yaml b/dts/Bindings/iio/adc/st,stm32-adc.yaml
index dd8eb15aeb..28417b31b5 100644
--- a/dts/Bindings/iio/adc/st,stm32-adc.yaml
+++ b/dts/Bindings/iio/adc/st,stm32-adc.yaml
@@ -76,8 +76,7 @@ properties:
     description:
       Phandle to system configuration controller. It can be used to control the
       analog circuitry on stm32mp1.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
 
   interrupt-controller: true
 
@@ -247,8 +246,7 @@ patternProperties:
           Resolution (bits) to use for conversions:
             - can be 6, 8, 10 or 12 on stm32f4
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
 
       st,adc-channels:
         description: |
@@ -256,8 +254,7 @@ patternProperties:
             - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
             - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
               stm32mp1.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
 
       st,adc-diff-channels:
         description: |
@@ -270,18 +267,17 @@ patternProperties:
           required. Both properties can be used together. Some channels can be
           used as single-ended and some other ones as differential (mixed). But
           channels can't be configured both as single-ended and differential.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "vinp" indicates positive input number
-                  minimum: 0
-                  maximum: 19
-                - description: |
-                    "vinn" indicates negative input number
-                  minimum: 0
-                  maximum: 19
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "vinp" indicates positive input number
+              minimum: 0
+              maximum: 19
+            - description: |
+                "vinn" indicates negative input number
+              minimum: 0
+              maximum: 19
 
       st,min-sample-time-nsecs:
         description:
@@ -291,8 +287,7 @@ patternProperties:
           array that matches "st,adc-channels" and/or "st,adc-diff-channels"
           list, to set sample time resp. for all channels, or independently for
           each channel.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
 
     allOf:
       - if:
diff --git a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index b1627441a0..d61bc011e8 100644
--- a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -95,16 +95,14 @@ patternProperties:
           On stm32h7 and stm32mp1:
           - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
           - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string-array
+        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
@@ -112,11 +110,10 @@ patternProperties:
           - 0: FastSinC
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - items:
-              minimum: 0
-              maximum: 5
+        $ref: /schemas/types.yaml#/definitions/uint32
+        items:
+          minimum: 0
+          maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -130,8 +127,7 @@ patternProperties:
           - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
         items:
           enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-channel-clk-src:
         description: |
@@ -142,8 +138,7 @@ patternProperties:
           - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
         items:
           enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-alt-channel:
         description:
diff --git a/dts/Bindings/iio/chemical/ams,ccs811.yaml b/dts/Bindings/iio/chemical/ams,ccs811.yaml
new file mode 100644
index 0000000000..52341c8bac
--- /dev/null
+++ b/dts/Bindings/iio/chemical/ams,ccs811.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS CCS811 VOC Sensor
+
+maintainers:
+  - Narcisa Vasile <narcisaanamaria12@gmail.com>
+
+description: |
+  Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality.
+
+properties:
+  compatible:
+    enum:
+      - ams,ccs811
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the nRESET line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: GPIO connected to the nWAKE line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      voc@5b {
+        compatible = "ams,ccs811";
+        reg = <0x5b>;
+        reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+        wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/iio/chemical/atlas,sensor.yaml b/dts/Bindings/iio/chemical/atlas,sensor.yaml
index edcd2904d5..69e8931e0a 100644
--- a/dts/Bindings/iio/chemical/atlas,sensor.yaml
+++ b/dts/Bindings/iio/chemical/atlas,sensor.yaml
@@ -4,19 +4,21 @@
 $id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atlas Scientific OEM sensors
+title: Atlas Scientific OEM + EZO sensors
 
 maintainers:
   - Matt Ranostay <matt.ranostay@konsulko.com>
 
 description: |
-  Atlas Scientific OEM sensors connected via I2C
+  Atlas Scientific OEM + EZO sensors connected via I2C
 
   Datasheets:
     http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf
     http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
     http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
     http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf
 
 properties:
   compatible:
@@ -25,6 +27,8 @@ properties:
       - atlas,ec-sm
       - atlas,orp-sm
       - atlas,ph-sm
+      - atlas,rtd-sm
+      - atlas,co2-ezo
 
   reg:
      maxItems: 1
diff --git a/dts/Bindings/iio/common.yaml b/dts/Bindings/iio/common.yaml
new file mode 100644
index 0000000000..97ffcb7704
--- /dev/null
+++ b/dts/Bindings/iio/common.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  This document defines device tree properties common to several iio
+  sensors. It doesn't constitue a device tree binding specification by itself but
+  is meant to be referenced by device tree bindings.
+
+  When referenced from sensor tree bindings the properties defined in this
+  document are defined as follows. The sensor tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  proximity-near-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For proximity sensors whether an object can be considered near to the
+      device depends on parameters like sensor position, covering glass and
+      aperture. This value gives an indication to userspace for which
+      sensor readings this is the case.
+
+      Raw proximity values equal or above this level should be
+      considered 'near' to the device (an object is near to the
+      sensor).
+
+...
diff --git a/dts/Bindings/iio/dac/ltc2632.txt b/dts/Bindings/iio/dac/ltc2632.txt
index 338c3220f0..1ab9570cf2 100644
--- a/dts/Bindings/iio/dac/ltc2632.txt
+++ b/dts/Bindings/iio/dac/ltc2632.txt
@@ -1,4 +1,4 @@
-Linear Technology LTC2632/2636 DAC
+Linear Technology LTC2632/2634/2636 DAC
 
 Required properties:
  - compatible: Has to contain one of the following:
@@ -8,6 +8,12 @@ Required properties:
 	lltc,ltc2632-h12
 	lltc,ltc2632-h10
 	lltc,ltc2632-h8
+	lltc,ltc2634-l12
+	lltc,ltc2634-l10
+	lltc,ltc2634-l8
+	lltc,ltc2634-h12
+	lltc,ltc2634-h10
+	lltc,ltc2634-h8
 	lltc,ltc2636-l12
 	lltc,ltc2636-l10
 	lltc,ltc2636-l8
diff --git a/dts/Bindings/iio/dac/st,stm32-dac.txt b/dts/Bindings/iio/dac/st,stm32-dac.txt
deleted file mode 100644
index bf2925c671..0000000000
--- a/dts/Bindings/iio/dac/st,stm32-dac.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics STM32 DAC
-
-The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
-may be configured in 8 or 12-bit mode. It has two output channels, each with
-its own converter.
-It has built-in noise and triangle waveform generator and supports external
-triggers for conversions. The DAC's output buffer allows a high drive output
-current.
-
-Contents of a stm32 dac root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-dac-core"
-  "st,stm32h7-dac-core"
-- reg: Offset and length of the device's register set.
-- clocks: Must contain an entry for pclk (which feeds the peripheral bus
-  interface)
-- clock-names: Must be "pclk".
-- vref-supply: Phandle to the vref+ input analog reference supply.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" for each DAC channel may be defined to set
-  DAC_OUTx pin in mode of operation for analog output on external pin.
-
-Contents of a stm32 dac child node:
------------------------------------
-DAC core node should contain at least one subnode, representing a
-DAC instance/channel available on the machine.
-
-Required properties:
-- compatible: Must be "st,stm32-dac".
-- reg: Must be either 1 or 2, to define (single) channel in use
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
-  Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
-	dac: dac@40007400 {
-		compatible = "st,stm32h7-dac-core";
-		reg = <0x40007400 0x400>;
-		clocks = <&clk>;
-		clock-names = "pclk";
-		vref-supply = <&reg_vref>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dac_out1 &dac_out2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dac1: dac@1 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <1>;
-		};
-
-		dac2: dac@2 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <2>;
-		};
-	};
diff --git a/dts/Bindings/iio/dac/st,stm32-dac.yaml b/dts/Bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 0000000000..393f700594
--- /dev/null
+++ b/dts/Bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 DAC bindings
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/iio/gyroscope/bmg160.txt b/dts/Bindings/iio/gyroscope/bmg160.txt
index 78e18a1e9c..bb43d1ad9c 100644
--- a/dts/Bindings/iio/gyroscope/bmg160.txt
+++ b/dts/Bindings/iio/gyroscope/bmg160.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 
-  - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+  - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro"
   - reg : the I2C address of the sensor (0x69)
 
 Optional properties:
diff --git a/dts/Bindings/iio/imu/adi,adis16475.yaml b/dts/Bindings/iio/imu/adi,adis16475.yaml
new file mode 100644
index 0000000000..208faaffa5
--- /dev/null
+++ b/dts/Bindings/iio/imu/adi,adis16475.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16475 and similar IMUs
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices ADIS16475 and similar IMUs
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16475-1
+      - adi,adis16475-2
+      - adi,adis16475-3
+      - adi,adis16477-1
+      - adi,adis16477-2
+      - adi,adis16477-3
+      - adi,adis16470
+      - adi,adis16465-1
+      - adi,adis16465-2
+      - adi,adis16465-3
+      - adi,adis16467-1
+      - adi,adis16467-2
+      - adi,adis16467-3
+      - adi,adis16500
+      - adi,adis16505-1
+      - adi,adis16505-2
+      - adi,adis16505-3
+      - adi,adis16507-1
+      - adi,adis16507-2
+      - adi,adis16507-3
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified,
+      it will be asserted during driver probe. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,sync-mode:
+    description:
+      Configures the device SYNC pin. The following modes are supported
+      0 - output_sync
+      1 - direct_sync
+      2 - scaled_sync
+      3 - pulse_sync
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+  adi,scaled-output-hz:
+    description:
+      This property must be present if the clock mode is scaled-sync through
+      clock-names property. In this mode, the input clock can have a range
+      of 1Hz to 128HZ which must be scaled to originate an allowable sample
+      rate. This property specifies that rate.
+    minimum: 1900
+    maximum: 2100
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adis16500
+              - adi,adis16505-1
+              - adi,adis16505-2
+              - adi,adis16505-3
+              - adi,adis16507-1
+              - adi,adis16507-2
+              - adi,adis16507-3
+
+    then:
+      properties:
+        adi,sync-mode:
+          minimum: 0
+          maximum: 2
+
+  - if:
+      properties:
+        adi,sync-mode:
+          enum: [1, 2, 3]
+
+    then:
+      dependencies:
+        adi,sync-mode: [ clocks ]
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adis16475: adis16475-3@0 {
+                    compatible = "adi,adis16475-3";
+                    reg = <0>;
+                    spi-cpha;
+                    spi-cpol;
+                    spi-max-frequency = <2000000>;
+                    interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+                    interrupt-parent = <&gpio>;
+            };
+    };
+...
diff --git a/dts/Bindings/iio/imu/bmi160.txt b/dts/Bindings/iio/imu/bmi160.txt
deleted file mode 100644
index 900c169de0..0000000000
--- a/dts/Bindings/iio/imu/bmi160.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
-and externally connectable Magnetometer
-
-https://www.bosch-sensortec.com/bst/products/all_products/bmi160
-
-Required properties:
- - compatible : should be "bosch,bmi160"
- - reg : the I2C address or SPI chip select number of the sensor
- - spi-max-frequency : set maximum clock frequency (only for SPI)
-
-Optional properties:
- - interrupts : interrupt mapping for IRQ
- - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
-   input, set to "INT2" if INT2 pin should be used instead
- - drive-open-drain : set if the specified interrupt pin should be configured as
-   open drain. If not set, defaults to push-pull.
-
-Examples:
-
-bmi160@68 {
-	compatible = "bosch,bmi160";
-	reg = <0x68>;
-
-	interrupt-parent = <&gpio4>;
-	interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "INT1";
-};
-
-bmi160@0 {
-	compatible = "bosch,bmi160";
-	reg = <0>;
-	spi-max-frequency = <10000000>;
-
-	interrupt-parent = <&gpio2>;
-	interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-names = "INT2";
-};
diff --git a/dts/Bindings/iio/imu/bosch,bmi160.yaml b/dts/Bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 0000000000..0d0ef84e22
--- /dev/null
+++ b/dts/Bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+  connectable Magnetometer
+  https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+  compatible:
+    const: bosch,bmi160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+    description: |
+      set to "INT1" if INT1 pin should be used as interrupt input, set
+      to "INT2" if INT2 pin should be used instead
+
+  drive-open-drain:
+    description: |
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@68 {
+                compatible = "bosch,bmi160";
+                reg = <0x68>;
+                interrupt-parent = <&gpio4>;
+                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "INT1";
+        };
+    };
+  - |
+    // Example for SPI
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@0 {
+                compatible = "bosch,bmi160";
+                reg = <0>;
+                spi-max-frequency = <10000000>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "INT2";
+        };
+    };
diff --git a/dts/Bindings/iio/light/amstaos,tsl2563.yaml b/dts/Bindings/iio/light/amstaos,tsl2563.yaml
new file mode 100644
index 0000000000..e201a06d8f
--- /dev/null
+++ b/dts/Bindings/iio/light/amstaos,tsl2563.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2560
+      - amstaos,tsl2561
+      - amstaos,tsl2562
+      - amstaos,tsl2563
+
+  reg:
+    maxItems: 1
+
+  amstaos,cover-comp-gain:
+    description: Multiplier for gain compensation
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 16]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@29 {
+        compatible = "amstaos,tsl2563";
+        reg = <0x29>;
+        amstaos,cover-comp-gain = <16>;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/light/tsl2563.txt b/dts/Bindings/iio/light/tsl2563.txt
deleted file mode 100644
index f91e809e73..0000000000
--- a/dts/Bindings/iio/light/tsl2563.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* AMS TAOS TSL2563 ambient light sensor
-
-Required properties:
-
-  - compatible : should be "amstaos,tsl2563"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - amstaos,cover-comp-gain : integer used as multiplier for gain
-                              compensation (default = 1)
-
-Example:
-
-tsl2563@29 {
-	compatible = "amstaos,tsl2563";
-	reg = <0x29>;
-	amstaos,cover-comp-gain = <16>;
-};
diff --git a/dts/Bindings/iio/light/tsl2772.yaml b/dts/Bindings/iio/light/tsl2772.yaml
index e8f7d1ada5..d812298579 100644
--- a/dts/Bindings/iio/light/tsl2772.yaml
+++ b/dts/Bindings/iio/light/tsl2772.yaml
@@ -33,13 +33,12 @@ properties:
 
   amstaos,proximity-diodes:
     description: Proximity diodes to enable
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 2
-        items:
-          minimum: 0
-          maximum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
 
   interrupts:
     maxItems: 1
diff --git a/dts/Bindings/iio/light/vcnl4000.txt b/dts/Bindings/iio/light/vcnl4000.txt
deleted file mode 100644
index 955af4555c..0000000000
--- a/dts/Bindings/iio/light/vcnl4000.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VISHAY VCNL4000 -  Ambient Light and proximity sensor
-
-This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
-
-Required properties:
-
-	-compatible: must be one of :
-        vishay,vcnl4000
-        vishay,vcnl4010
-        vishay,vcnl4020
-        vishay,vcnl4040
-        vishay,vcnl4200
-
-	-reg: I2C address of the sensor, should be one from below based on the model:
-        0x13
-        0x51
-        0x60
-
-Example:
-
-light-sensor@51 {
-	compatible = "vishay,vcnl4200";
-	reg = <0x51>;
-};
diff --git a/dts/Bindings/iio/light/vishay,vcnl4000.yaml b/dts/Bindings/iio/light/vishay,vcnl4000.yaml
new file mode 100644
index 0000000000..da8f2e8725
--- /dev/null
+++ b/dts/Bindings/iio/light/vishay,vcnl4000.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  Ambient light sensing with proximity detection over an i2c
+  interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl4000
+      - vishay,vcnl4010
+      - vishay,vcnl4020
+      - vishay,vcnl4040
+      - vishay,vcnl4200
+  reg:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+- |
+  i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@51 {
+              compatible = "vishay,vcnl4200";
+              reg = <0x51>;
+              proximity-near-level = <220>;
+      };
+  };
+...
diff --git a/dts/Bindings/iio/magnetometer/ak8974.txt b/dts/Bindings/iio/magnetometer/ak8974.txt
index baecc4a851..7f06eff3b5 100644
--- a/dts/Bindings/iio/magnetometer/ak8974.txt
+++ b/dts/Bindings/iio/magnetometer/ak8974.txt
@@ -2,7 +2,9 @@
 
 Required properties:
 
-- compatible : should be "asahi-kasei,ak8974"
+- compatible:
+    * "asahi-kasei,ak8974"
+    * "alps,hscdtd008a"
 - reg : the I2C address of the magnetometer
 
 Optional properties:
diff --git a/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml b/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml
new file mode 100644
index 0000000000..4190253336
--- /dev/null
+++ b/dts/Bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Proximity Sensor With Infrared Emitter
+
+maintainers:
+  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
+
+description: |
+  The VCNL3020 is a fully integrated proximity sensor. Fully integrated means
+  that the infrared emitter is included in the package. It has 16-bit
+  resolution. It includes a signal processing IC and features standard I2C
+  communication interface. It features an interrupt function.
+
+  Specifications about the devices can be found at:
+  https://www.vishay.com/docs/84150/vcnl3020.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl3020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  vishay,led-current-microamp:
+    description:
+      The driver current for the LED used in proximity sensing.
+    enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
+          100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+          180000, 190000, 200000]
+    default: 20000
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@13 {
+              compatible = "vishay,vcnl3020";
+              reg = <0x13>;
+              vishay,led-current-microamp = <200000>;
+        };
+    };
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
index 0ef64a4444..3213599c50 100644
--- a/dts/Bindings/iio/st-sensors.txt
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -50,6 +50,7 @@ Accelerometers:
 - st,lis3dhh
 - st,lis3de
 - st,lis2de12
+- st,lis2hh12
 
 Gyroscopes:
 - st,l3g4200d-gyro
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
index 8fb46de664..40ccbe7b5c 100644
--- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
@@ -42,10 +42,9 @@ properties:
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
 
   '#address-cells':
     const: 1
@@ -91,8 +90,7 @@ patternProperties:
           7 - Type T Thermocouple
           8 - Type B Thermocouple
           9 - Custom Thermocouple
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 1
         maximum: 9
 
@@ -121,8 +119,7 @@ patternProperties:
           more details look at table 69 and 70.
           Note should be signed, but dtc doesn't currently maintain the
           sign.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -138,8 +135,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a diode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
@@ -196,8 +192,7 @@ patternProperties:
           16 - RTD PT-1000 (0.00375)
           17 - RTD NI-120
           18 - RTD Custom
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 10
         maximum: 18
 
@@ -210,9 +205,8 @@ patternProperties:
         description:
           Identifies the number of wires used by the RTD. Setting this
           property to 5 means 4 wires with Kelvin Rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [2, 3, 4, 5]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 3, 4, 5]
 
       adi,rsense-share:
         description:
@@ -237,18 +231,16 @@ patternProperties:
         description:
           This property set the RTD curve used and the corresponding
           Callendar-VanDusen constants. Look at table 30 of the datasheet.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
 
       adi,custom-rtd:
         description:
           This is a table, where each entry should be a pair of
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK. For more details values look at table 74 and 75.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         items:
           minItems: 3
           maxItems: 64
@@ -260,7 +252,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^thermistor@":
     type: object
@@ -280,8 +272,7 @@ patternProperties:
           25 - Thermistor Spectrum 1003k 1kohm
           26 - Thermistor Custom Steinhart-Hart
           27 - Custom Thermistor
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 19
         maximum: 27
 
@@ -314,10 +305,9 @@ patternProperties:
           This property controls the magnitude of the excitation current
           applied to the thermistor. Value 0 set's the sensor in auto-range
           mode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
-                   250000, 500000, 1000000]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+          500000, 1000000]
 
       adi,custom-thermistor:
         description:
@@ -325,8 +315,7 @@ patternProperties:
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK only for custom thermistors. For more details look at table
           78 and 79.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -339,8 +328,7 @@ patternProperties:
           be programmed into the device memory using this property. For
           Steinhart sensors the coefficients are given in the raw
           format. Look at table 82 for more information.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
           minItems: 6
           maxItems: 6
@@ -349,7 +337,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^adc@":
     type: object
@@ -358,8 +346,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a direct adc.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
@@ -379,8 +366,7 @@ patternProperties:
 
       adi,sensor-type:
         description: Identifies the sensor as a rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms: