dts: update to v5.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

17 files changed, 1023 insertions, 7 deletions

diff --git a/dts/Bindings/iio/accel/adi,adxl367.yaml b/dts/Bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 0000000000..d259e796c1
--- /dev/null
+++ b/dts/Bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/dts/Bindings/iio/adc/adi,ad7280a.yaml b/dts/Bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 0000000000..a694d5794d
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml b/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml
index efed361215..31f840d593 100644
--- a/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 maintainers:
-  - Ludovic Desroches <ludovic.desroches@atmel.com>
   - Eugen Hristev <eugen.hristev@microchip.com>
 
 properties:
@@ -72,7 +71,6 @@ required:
   - atmel,min-sample-rate-hz
   - atmel,max-sample-rate-hz
   - atmel,startup-time-ms
-  - atmel,trigger-edge-type
 
 examples:
   - |
diff --git a/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index b939f9652e..65581ad4b8 100644
--- a/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -34,6 +34,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
diff --git a/dts/Bindings/iio/adc/microchip,mcp3201.yaml b/dts/Bindings/iio/adc/microchip,mcp3201.yaml
index cbbac4ce56..fcc1ba53b2 100644
--- a/dts/Bindings/iio/adc/microchip,mcp3201.yaml
+++ b/dts/Bindings/iio/adc/microchip,mcp3201.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Oskar Andero <oskar.andero@gmail.com>
 
 description: |
-   Family of simple ADCs with an I2C inteface.
+   Family of simple ADCs with a SPI interface.
 
 properties:
   compatible:
diff --git a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
index 27e3108661..2a94db6888 100644
--- a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -51,7 +51,7 @@ examples:
         #size-cells = <0>;
         pmic_iadc: adc@3600 {
             compatible = "qcom,spmi-iadc";
-            reg = <0x3600 0x100>;
+            reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
             #io-channel-cells  = <1>;
diff --git a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
index 7b895784e0..57a3135608 100644
--- a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -74,9 +74,9 @@ examples:
         compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
         adc {
             compatible = "ti,palmas-gpadc";
-            interrupts = <18 0
-                          16 0
-                          17 0>;
+            interrupts = <18 0>,
+                         <16 0>,
+                         <17 0>;
             #io-channel-cells = <1>;
             ti,channel0-current-microamp = <5>;
             ti,channel3-current-microamp = <10>;
diff --git a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml
index 87992db389..3698b4b090 100644
--- a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml
+++ b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -92,6 +92,10 @@ properties:
     description: AMS Controller register space
     maxItems: 1
 
+  clocks:
+    items:
+      - description: AMS reference clock
+
   ranges:
     description:
       Maps the child address space for PS and/or PL.
@@ -181,12 +185,15 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
   - ranges
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
     bus {
         #address-cells = <2>;
         #size-cells = <2>;
@@ -196,6 +203,7 @@ examples:
             interrupt-parent = <&gic>;
             interrupts = <0 56 4>;
             reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
             #address-cells = <1>;
             #size-cells = <1>;
             #io-channel-cells = <1>;
diff --git a/dts/Bindings/iio/afe/temperature-sense-rtd.yaml b/dts/Bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 0000000000..336ce96371
--- /dev/null
+++ b/dts/Bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/dts/Bindings/iio/afe/temperature-transducer.yaml b/dts/Bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 0000000000..cfbf5350db
--- /dev/null
+++ b/dts/Bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/dts/Bindings/iio/amplifiers/adi,ada4250.yaml b/dts/Bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 0000000000..5277479be3
--- /dev/null
+++ b/dts/Bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/dac/adi,ltc2688.yaml b/dts/Bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 0000000000..48f9e7d294
--- /dev/null
+++ b/dts/Bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          ltc2688: ltc2688@0 {
+                  compatible = "adi,ltc2688";
+                  reg = <0>;
+
+                  vcc-supply = <&vcc>;
+                  iovcc-supply = <&vcc>;
+                  vref-supply = <&vref>;
+
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  channel@0 {
+                          reg = <0>;
+                          adi,toggle-mode;
+                          adi,overrange;
+                  };
+
+                  channel@1 {
+                          reg = <1>;
+                          adi,output-range-microvolt = <0 10000000>;
+
+                          clocks = <&clock_tgp3>;
+                          adi,toggle-dither-input = <2>;
+                  };
+          };
+    };
+
+...
diff --git a/dts/Bindings/iio/frequency/adi,admv1014.yaml b/dts/Bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 0000000000..2716c1e8fe
--- /dev/null
+++ b/dts/Bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscilator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/frequency/adi,admv4420.yaml b/dts/Bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 0000000000..da7fe85ec9
--- /dev/null
+++ b/dts/Bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Cristian Pop <cristian.pop@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/proximity/semtech,sx9324.yaml b/dts/Bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 0000000000..b8a6ee1685
--- /dev/null
+++ b/dts/Bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };
diff --git a/dts/Bindings/iio/proximity/semtech,sx9360.yaml b/dts/Bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 0000000000..63e1a1fd00
--- /dev/null
+++ b/dts/Bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };
diff --git a/dts/Bindings/iio/st,st-sensors.yaml b/dts/Bindings/iio/st,st-sensors.yaml
index 71de5631eb..9735a20482 100644
--- a/dts/Bindings/iio/st,st-sensors.yaml
+++ b/dts/Bindings/iio/st,st-sensors.yaml
@@ -46,6 +46,9 @@ properties:
           - st,lsm330d-accel
           - st,lsm330dl-accel
           - st,lsm330dlc-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
       - description: STMicroelectronics Gyroscopes
         enum:
           - st,l3g4200d-gyro