summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/interrupt-controller
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-04-25 11:22:32 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-04-28 09:08:46 +0200
commit00ce25c6dcdae5582ae4be37147ab33678adc995 (patch)
tree41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/interrupt-controller
parent0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff)
downloadbarebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/interrupt-controller')
-rw-r--r--dts/Bindings/interrupt-controller/abilis,tb10x-ictl.txt38
-rw-r--r--dts/Bindings/interrupt-controller/allwinner,sun4i-ic.txt18
-rw-r--r--dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt27
-rw-r--r--dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt110
-rw-r--r--dts/Bindings/interrupt-controller/cirrus,clps711x-intc.txt41
-rw-r--r--dts/Bindings/interrupt-controller/interrupts.txt112
-rw-r--r--dts/Bindings/interrupt-controller/lsi,zevio-intc.txt18
-rw-r--r--dts/Bindings/interrupt-controller/marvell,orion-intc.txt48
-rw-r--r--dts/Bindings/interrupt-controller/renesas,intc-irqpin.txt16
-rw-r--r--dts/Bindings/interrupt-controller/samsung,s3c24xx-irq.txt53
-rw-r--r--dts/Bindings/interrupt-controller/snps,dw-apb-ictl.txt32
11 files changed, 513 insertions, 0 deletions
diff --git a/dts/Bindings/interrupt-controller/abilis,tb10x-ictl.txt b/dts/Bindings/interrupt-controller/abilis,tb10x-ictl.txt
new file mode 100644
index 0000000..9d52d5a
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -0,0 +1,38 @@
+TB10x Top Level Interrupt Controller
+====================================
+
+The Abilis TB10x SOC contains a custom interrupt controller. It performs
+one-to-one mapping of external interrupt sources to CPU interrupts and
+provides support for reconfigurable trigger modes.
+
+Required properties
+-------------------
+
+- compatible: Should be "abilis,tb10x-ictl"
+- reg: specifies physical base address and size of register range.
+- interrupt-congroller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+ source connected to this controller. The value shall be 2.
+- interrupt-parent: Specifies the parent interrupt controller.
+- interrupts: Specifies the list of interrupt lines which are handled by
+ the interrupt controller in the parent controller's notation. Interrupts
+ are mapped one-to-one to parent interrupts.
+
+Example
+-------
+
+intc: interrupt-controller { /* Parent interrupt controller */
+ interrupt-controller;
+ #interrupt-cells = <1>; /* For example below */
+ /* ... */
+};
+
+tb10x_ictl: pic@2000 { /* TB10x interrupt controller */
+ compatible = "abilis,tb10x-ictl";
+ reg = <0x2000 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29 30 31>;
+};
diff --git a/dts/Bindings/interrupt-controller/allwinner,sun4i-ic.txt b/dts/Bindings/interrupt-controller/allwinner,sun4i-ic.txt
new file mode 100644
index 0000000..b290ca1
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -0,0 +1,18 @@
+Allwinner Sunxi Interrupt Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-a10-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "allwinner,sun4i-a10-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt b/dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
new file mode 100644
index 0000000..d1c5cda
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
@@ -0,0 +1,27 @@
+Allwinner Sunxi NMI Controller
+==============================
+
+Required properties:
+
+- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
+ "allwinner,sun6i-a31-sc-nmi"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2. The first cell is the IRQ number, the
+ second cell the trigger type as defined in interrupt.txt in this directory.
+- interrupt-parent: Specifies the parent interrupt controller.
+- interrupts: Specifies the interrupt line (NMI) which is handled by
+ the interrupt controller in the parent controller's notation. This value
+ shall be the NMI.
+
+Example:
+
+sc-nmi-intc@01c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 0 4>;
+};
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
new file mode 100644
index 0000000..7da578d
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -0,0 +1,110 @@
+BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
+
+The BCM2835 contains a custom top-level interrupt controller, which supports
+72 interrupt sources using a 2-level register scheme. The interrupt
+controller, or the HW block containing it, is referred to occasionally
+as "armctrl" in the SoC documentation, hence naming of this binding.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-armctrl-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+
+ The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+ pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+ 1/2" register.
+
+ The 2nd cell contains the interrupt number within the bank. Valid values
+ are 0..7 for bank 0, and 0..31 for bank 1.
+
+The interrupt sources are as follows:
+
+Bank 0:
+0: ARM_TIMER
+1: ARM_MAILBOX
+2: ARM_DOORBELL_0
+3: ARM_DOORBELL_1
+4: VPU0_HALTED
+5: VPU1_HALTED
+6: ILLEGAL_TYPE0
+7: ILLEGAL_TYPE1
+
+Bank 1:
+0: TIMER0
+1: TIMER1
+2: TIMER2
+3: TIMER3
+4: CODEC0
+5: CODEC1
+6: CODEC2
+7: VC_JPEG
+8: ISP
+9: VC_USB
+10: VC_3D
+11: TRANSPOSER
+12: MULTICORESYNC0
+13: MULTICORESYNC1
+14: MULTICORESYNC2
+15: MULTICORESYNC3
+16: DMA0
+17: DMA1
+18: VC_DMA2
+19: VC_DMA3
+20: DMA4
+21: DMA5
+22: DMA6
+23: DMA7
+24: DMA8
+25: DMA9
+26: DMA10
+27: DMA11
+28: DMA12
+29: AUX
+30: ARM
+31: VPUDMA
+
+Bank 2:
+0: HOSTPORT
+1: VIDEOSCALER
+2: CCP2TX
+3: SDC
+4: DSI0
+5: AVE
+6: CAM0
+7: CAM1
+8: HDMI0
+9: HDMI1
+10: PIXELVALVE1
+11: I2CSPISLV
+12: DSI1
+13: PWA0
+14: PWA1
+15: CPR
+16: SMI
+17: GPIO0
+18: GPIO1
+19: GPIO2
+20: GPIO3
+21: VC_I2C
+22: VC_SPI
+23: VC_I2SPCM
+24: VC_SDIO
+25: VC_UART
+26: SLIMBUS
+27: VEC
+28: CPG
+29: RNG
+30: VC_ARASANSDIO
+31: AVSPMON
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "brcm,bcm2835-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
diff --git a/dts/Bindings/interrupt-controller/cirrus,clps711x-intc.txt b/dts/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 0000000..759339c
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,clps711x-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID Name Description
+---------------------------
+1: BLINT Battery low (FIQ)
+3: MCINT Media changed (FIQ)
+4: CSINT CODEC sound
+5: EINT1 External 1
+6: EINT2 External 2
+7: EINT3 External 3
+8: TC1OI TC1 under flow
+9: TC2OI TC2 under flow
+10: RTCMI RTC compare match
+11: TINT 64Hz tick
+12: UTXINT1 UART1 transmit FIFO half empty
+13: URXINT1 UART1 receive FIFO half full
+14: UMSINT UART1 modem status changed
+15: SSEOTI SSI1 end of transfer
+16: KBDINT Keyboard
+17: SS2RX SSI2 receive FIFO half or greater full
+18: SS2TX SSI2 transmit FIFO less than half empty
+28: UTXINT2 UART2 transmit FIFO half empty
+29: URXINT2 UART2 receive FIFO half full
+32: DAIINT DAI interface (FIQ)
+
+Example:
+ intc: interrupt-controller {
+ compatible = "cirrus,clps711x-intc";
+ reg = <0x80000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/dts/Bindings/interrupt-controller/interrupts.txt b/dts/Bindings/interrupt-controller/interrupts.txt
new file mode 100644
index 0000000..1486497
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/interrupts.txt
@@ -0,0 +1,112 @@
+Specifying interrupt information for devices
+============================================
+
+1) Interrupt client nodes
+-------------------------
+
+Nodes that describe devices which generate interrupts must contain an either an
+"interrupts" property or an "interrupts-extended" property. These properties
+contain a list of interrupt specifiers, one per output interrupt. The format of
+the interrupt specifier is determined by the interrupt controller to which the
+interrupts are routed; see section 2 below for details.
+
+ Example:
+ interrupt-parent = <&intc1>;
+ interrupts = <5 0>, <6 0>;
+
+The "interrupt-parent" property is used to specify the controller to which
+interrupts are routed and contains a single phandle referring to the interrupt
+controller node. This property is inherited, so it may be specified in an
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form for use when a node needs
+to reference multiple interrupt parents. Each entry in this property contains
+both the parent phandle and the interrupt specifier. "interrupts-extended"
+should only be used when a device has multiple interrupt parents.
+
+ Example:
+ interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+A device node may contain either "interrupts" or "interrupts-extended", but not
+both. If both properties are present, then the operating system should log an
+error and use only the data in "interrupts".
+
+2) Interrupt controller nodes
+-----------------------------
+
+A device is marked as an interrupt controller with the "interrupt-controller"
+property. This is a empty, boolean property. An additional "#interrupt-cells"
+property defines the number of cells needed to specify a single interrupt.
+
+It is the responsibility of the interrupt controller's binding to define the
+length and format of the interrupt specifier. The following two variants are
+commonly used:
+
+ a) one cell
+ -----------
+ The #interrupt-cells property is set to 1 and the single cell defines the
+ index of the interrupt within the controller.
+
+ Example:
+
+ vic: intc@10140000 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140000 0x1000>;
+ };
+
+ sic: intc@10003000 {
+ compatible = "arm,versatile-sic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10003000 0x1000>;
+ interrupt-parent = <&vic>;
+ interrupts = <31>; /* Cascaded to vic */
+ };
+
+ b) two cells
+ ------------
+ The #interrupt-cells property is set to 2 and the first cell defines the
+ index of the interrupt within the controller, while the second cell is used
+ to specify any of the following flags:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+ Example:
+
+ i2c@7000c000 {
+ gpioext: gpio-adnp@41 {
+ compatible = "ad,gpio-adnp";
+ reg = <0x41>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <160 1>;
+
+ gpio-controller;
+ #gpio-cells = <1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ nr-gpios = <64>;
+ };
+
+ sx8634@2b {
+ compatible = "smtc,sx8634";
+ reg = <0x2b>;
+
+ interrupt-parent = <&gpioext>;
+ interrupts = <3 0x8>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ threshold = <0x40>;
+ sensitivity = <7>;
+ };
+ };
diff --git a/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt b/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 0000000..aee38e7
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
diff --git a/dts/Bindings/interrupt-controller/marvell,orion-intc.txt b/dts/Bindings/interrupt-controller/marvell,orion-intc.txt
new file mode 100644
index 0000000..2c11ac7
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/marvell,orion-intc.txt
@@ -0,0 +1,48 @@
+Marvell Orion SoC interrupt controllers
+
+* Main interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-intc"
+- reg: base address(es) of interrupt registers starting with CAUSE register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of first base address,
+- 1 maps to bit 1 of first base address,
+- 32 maps to bit 0 of second base address, and so on.
+
+Example:
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ /* Dove has 64 first level interrupts */
+ reg = <0x20200 0x10>, <0x20210 0x10>;
+ };
+
+* Bridge interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-bridge-intc"
+- reg: base address of bridge interrupt registers starting with CAUSE register
+- interrupts: bridge interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Optional properties:
+- marvell,#interrupts: number of interrupts provided by bridge interrupt
+ controller, defaults to 32 if not set
+
+Example:
+ bridge_intc: interrupt-controller {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ /* Dove bridge provides 5 interrupts */
+ marvell,#interrupts = <5>;
+ };
diff --git a/dts/Bindings/interrupt-controller/renesas,intc-irqpin.txt b/dts/Bindings/interrupt-controller/renesas,intc-irqpin.txt
new file mode 100644
index 0000000..1f8b0c5
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -0,0 +1,16 @@
+DT bindings for the R-/SH-Mobile irqpin controller
+
+Required properties:
+
+- compatible: has to be "renesas,intc-irqpin"
+- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
+ interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+ properties
+- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
+ if different from the default 4 bits
+- control-parent: disable and enable interrupts on the parent interrupt
+ controller, needed for some broken implementations
diff --git a/dts/Bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/dts/Bindings/interrupt-controller/samsung,s3c24xx-irq.txt
new file mode 100644
index 0000000..c54c5a9
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/samsung,s3c24xx-irq.txt
@@ -0,0 +1,53 @@
+Samsung S3C24XX Interrupt Controllers
+
+The S3C24XX SoCs contain a custom set of interrupt controllers providing a
+varying number of interrupt sources. The set consists of a main- and sub-
+controller and on newer SoCs even a second main controller.
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c2410-irq"
+ for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 4 and interrupt descriptor shall
+ have the following format:
+ <ctrl_num parent_irq ctrl_irq type>
+
+ ctrl_num contains the controller to use:
+ - 0 ... main controller
+ - 1 ... sub controller
+ - 2 ... second main controller on s3c2416 and s3c2450
+ parent_irq contains the parent bit in the main controller and will be
+ ignored in main controllers
+ ctrl_irq contains the interrupt bit of the controller
+ type contains the trigger type to use
+
+Example:
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2410-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells=<4>;
+ };
+
+ [...]
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupt-parent = <&subintc>;
+ interrupts = <1 28 0 4>, <1 28 1 4>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 0 3>, <0 8 0 3>;
+ };
diff --git a/dts/Bindings/interrupt-controller/snps,dw-apb-ictl.txt b/dts/Bindings/interrupt-controller/snps,dw-apb-ictl.txt
new file mode 100644
index 0000000..4929117
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -0,0 +1,32 @@
+Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+Synopsys DesignWare provides interrupt controller IP for APB known as
+dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
+APB bus, e.g. Marvell Armada 1500.
+
+Required properties:
+- compatible: shall be "snps,dw-apb-ictl"
+- reg: physical base address of the controller and length of memory mapped
+ region starting with ENABLE_LOW register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+- interrupts: interrupt reference to primary interrupt controller
+- interrupt-parent: (optional) reference specific primary interrupt controller
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of low interrupts,
+- 1 maps to bit 1 of low interrupts,
+- 32 maps to bit 0 of high interrupts,
+- 33 maps to bit 1 of high interrupts,
+- (optional) fast interrupts start at 64.
+
+Example:
+ aic: interrupt-controller@3000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3000 0xc00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };