dts: update to v4.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 169 insertions, 0 deletions

diff --git a/dts/Bindings/leds/backlight/pwm-backlight.txt b/dts/Bindings/leds/backlight/pwm-backlight.txt
index 764db86d44..3108109066 100644
--- a/dts/Bindings/leds/backlight/pwm-backlight.txt
+++ b/dts/Bindings/leds/backlight/pwm-backlight.txt
@@ -17,6 +17,10 @@ Optional properties:
                "pwms" property (see PWM binding[0])
   - enable-gpios: contains a single GPIO specifier for the GPIO which enables
                   and disables the backlight (see GPIO binding[1])
+  - post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM
+                          and enabling the backlight using GPIO.
+  - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
+                      and setting PWM value to 0.
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 [1]: Documentation/devicetree/bindings/gpio/gpio.txt
@@ -32,4 +36,6 @@ Example:
 
 		power-supply = <&vdd_bl_reg>;
 		enable-gpios = <&gpio 58 0>;
+		post-pwm-on-delay-ms = <10>;
+		pwm-off-delay-ms = <10>;
 	};
diff --git a/dts/Bindings/leds/backlight/zii,rave-sp-backlight.txt b/dts/Bindings/leds/backlight/zii,rave-sp-backlight.txt
new file mode 100644
index 0000000000..ff5c921386
--- /dev/null
+++ b/dts/Bindings/leds/backlight/zii,rave-sp-backlight.txt
@@ -0,0 +1,23 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings
+
+RAVE SP backlight device is a "MFD cell" device corresponding to
+backlight functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-backlight"
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+	}
+
diff --git a/dts/Bindings/leds/leds-cr0014114.txt b/dts/Bindings/leds/leds-cr0014114.txt
new file mode 100644
index 0000000000..4255b19ad2
--- /dev/null
+++ b/dts/Bindings/leds/leds-cr0014114.txt
@@ -0,0 +1,54 @@
+Crane Merchandising System - cr0014114 LED driver
+-------------------------------------------------
+
+This LED Board is widely used in vending machines produced
+by Crane Merchandising Systems.
+
+Required properties:
+- compatible: "crane,cr0014114"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+LED sub-node properties:
+- label :
+	see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+	see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+led-controller@0 {
+	compatible = "crane,cr0014114";
+	reg = <0>;
+	spi-max-frequency = <50000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@0 {
+		reg = <0>;
+		label = "red:coin";
+	};
+	led@1 {
+		reg = <1>;
+		label = "green:coin";
+	};
+	led@2 {
+		reg = <2>;
+		label = "blue:coin";
+	};
+	led@3 {
+		reg = <3>;
+		label = "red:bill";
+	};
+	led@4 {
+		reg = <4>;
+		label = "green:bill";
+	};
+	led@5 {
+		reg = <5>;
+		label = "blue:bill";
+	};
+	...
+};
diff --git a/dts/Bindings/leds/leds-lm3601x.txt b/dts/Bindings/leds/leds-lm3601x.txt
new file mode 100644
index 0000000000..a88b2c41e7
--- /dev/null
+++ b/dts/Bindings/leds/leds-lm3601x.txt
@@ -0,0 +1,45 @@
+* Texas Instruments - lm3601x Single-LED Flash Driver
+
+The LM3601X are ultra-small LED flash drivers that
+provide a high level of adjustability.
+
+Required properties:
+	- compatible : Can be one of the following
+		"ti,lm36010"
+		"ti,lm36011"
+	- reg : I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Required child properties:
+	- reg : 0 - Indicates a IR mode
+		1 - Indicates a Torch (white LED) mode
+
+Required properties for flash LED child nodes:
+	See Documentation/devicetree/bindings/leds/common.txt
+	- flash-max-microamp : Range from 11mA - 1.5A
+	- flash-max-timeout-us : Range from 40ms - 1600ms
+	- led-max-microamp : Range from 2.4mA - 376mA
+
+Optional child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@64 {
+	compatible = "ti,lm36010";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x64>;
+
+	led@0 {
+		reg = <1>;
+		label = "white:torch";
+		led-max-microamp = <376000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1600000>;
+	};
+}
+
+For more product information please see the links below:
+http://www.ti.com/product/LM36010
+http://www.ti.com/product/LM36011
diff --git a/dts/Bindings/leds/leds-sc27xx-bltc.txt b/dts/Bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 0000000000..dddf84f9c7
--- /dev/null
+++ b/dts/Bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,41 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: Should be "sprd,sc2731-bltc".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: Specify the controller address.
+
+Required child properties:
+- reg: Port this LED is connected to.
+
+Optional child properties:
+- label: See Documentation/devicetree/bindings/leds/common.txt.
+
+Examples:
+
+led-controller@200 {
+	compatible = "sprd,sc2731-bltc";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x200>;
+
+	led@0 {
+		label = "red";
+		reg = <0x0>;
+	};
+
+	led@1 {
+		label = "green";
+		reg = <0x1>;
+	};
+
+	led@2 {
+		label = "blue";
+		reg = <0x2>;
+	};
+};