summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/media/i2c/toshiba,et8ek8.txt
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2017-03-10 08:56:15 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2017-03-10 08:56:15 +0100
commit957bb6b6bcebc4c36f5f284dfb58d489e81016c6 (patch)
tree593d098617017987daaf8ce339e0eb29ea09fdde /dts/Bindings/media/i2c/toshiba,et8ek8.txt
parentcc2392cf4f2d5208be427e9ffdeafba192f05cbe (diff)
downloadbarebox-957bb6b6bcebc4c36f5f284dfb58d489e81016c6.tar.gz
dts: update to v4.11-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/i2c/toshiba,et8ek8.txt')
-rw-r--r--dts/Bindings/media/i2c/toshiba,et8ek8.txt48
1 files changed, 48 insertions, 0 deletions
diff --git a/dts/Bindings/media/i2c/toshiba,et8ek8.txt b/dts/Bindings/media/i2c/toshiba,et8ek8.txt
new file mode 100644
index 0000000..0b7b6a4
--- /dev/null
+++ b/dts/Bindings/media/i2c/toshiba,et8ek8.txt
@@ -0,0 +1,48 @@
+Toshiba et8ek8 5MP sensor
+
+Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "toshiba,et8ek8"
+- reg: I2C address (0x3e, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), 2.8 volts
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor. Camera
+ driver will set this frequency on the external clock. The clock frequency is
+ a pre-determined frequency known to be suitable to the board.
+- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor
+ is in hardware standby mode when the signal is in the low state.
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ cam1: camera@3e {
+ compatible = "toshiba,et8ek8";
+ reg = <0x3e>;
+ vana-supply = <&vaux4>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+ port {
+ csi_cam1: endpoint {
+ remote-endpoint = <&csi_out1>;
+ };
+ };
+ };
+};