dts: update to v4.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 7 insertions, 1 deletions

diff --git a/dts/Bindings/media/video-interfaces.txt b/dts/Bindings/media/video-interfaces.txt
index 9cd2a36912..852041a748 100644
--- a/dts/Bindings/media/video-interfaces.txt
+++ b/dts/Bindings/media/video-interfaces.txt
@@ -76,6 +76,11 @@ Optional endpoint properties
   mode horizontal and vertical synchronization signals are provided to the
   slave device (data source) by the master device (data sink). In the master
   mode the data source device is also the source of the synchronization signals.
+- bus-type: data bus type. Possible values are:
+  0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
+  1 - MIPI CSI-2 C-PHY
+  2 - MIPI CSI1
+  3 - CCP2
 - bus-width: number of data lines actively used, valid for the parallel busses.
 - data-shift: on the parallel data busses, if bus-width is used to specify the
   number of data lines, data-shift can be used to specify which data lines are
@@ -112,7 +117,8 @@ Optional endpoint properties
   should be the combined length of data-lanes and clock-lanes properties.
   If the lane-polarities property is omitted, the value must be interpreted
   as 0 (normal). This property is valid for serial busses only.
-
+- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
+  with CCP2, for instance.
 
 Example
 -------