Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 28 insertions, 0 deletions

diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt
new file mode 100644
index 0000000000..56edb55206
--- /dev/null
+++ b/dts/Bindings/mfd/stmpe.txt
@@ -0,0 +1,28 @@
+* ST Microelectronics STMPE Multi-Functional Device
+
+STMPE is an MFD device which may expose the following inbuilt devices: gpio,
+keypad, touchscreen, adc, pwm, rotator.
+
+Required properties:
+ - compatible                   : "st,stmpe[610|801|811|1601|2401|2403]"
+ - reg                          : I2C/SPI address of the device
+
+Optional properties:
+ - interrupts                   : The interrupt outputs from the controller
+ - interrupt-controller         : Marks the device node as an interrupt controller
+ - interrupt-parent             : Specifies which IRQ controller we're connected to
+ - wakeup-source                : Marks the input device as wakable
+ - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+
+Example:
+
+	stmpe1601: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <26 0x4>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+
+		wakeup-source;
+		st,autosleep-timeout = <1024>;
+	};