Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 31 insertions, 0 deletions

diff --git a/dts/Bindings/mmc/mmc-spi-slot.txt b/dts/Bindings/mmc/mmc-spi-slot.txt
new file mode 100644
index 0000000000..0e5e2ec400
--- /dev/null
+++ b/dts/Bindings/mmc/mmc-spi-slot.txt
@@ -0,0 +1,31 @@
+MMC/SD/SDIO slot directly connected to a SPI bus
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmc_spi driver.
+
+Required properties:
+- spi-max-frequency : maximum frequency for this device (Hz).
+- voltage-ranges : two cells are required, first cell specifies minimum
+  slot voltage (mV), second cell specifies maximum slot voltage (mV).
+  Several ranges could be specified.
+
+Optional properties:
+- gpios : may specify GPIOs in this order: Card-Detect GPIO,
+  Write-Protect GPIO. Note that this does not follow the
+  binding from mmc.txt, for historical reasons.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Example:
+
+	mmc-slot@0 {
+		compatible = "fsl,mpc8323rdb-mmc-slot",
+			     "mmc-spi-slot";
+		reg = <0>;
+		gpios = <&qe_pio_d 14 1
+			 &qe_pio_d 15 0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <50000000>;
+		interrupts = <42>;
+		interrupt-parent = <&PIC>;
+	};