Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 36 insertions, 0 deletions

diff --git a/dts/Bindings/mmc/sdhci-pxa.txt b/dts/Bindings/mmc/sdhci-pxa.txt
new file mode 100644
index 0000000000..86223c3eda
--- /dev/null
+++ b/dts/Bindings/mmc/sdhci-pxa.txt
@@ -0,0 +1,36 @@
+* Marvell sdhci-pxa v2/v3 controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
+
+Required properties:
+- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
+  "marvell,armada-380-sdhci".
+- reg:
+  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
+    the SDHCI registers.
+  * for "marvell,armada-380-sdhci", two register areas. The first one
+    for the SDHCI registers themselves, and the second one for the
+    AXI/Mbus bridge registers of the SDHCI unit.
+
+Optional properties:
+- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
+
+Example:
+
+sdhci@d4280800 {
+	compatible = "mrvl,pxav3-mmc";
+	reg = <0xd4280800 0x800>;
+	bus-width = <8>;
+	interrupts = <27>;
+	non-removable;
+	mrvl,clk-delay-cycles = <31>;
+};
+
+sdhci@d8000 {
+	compatible = "marvell,armada-380-sdhci";
+	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+	interrupts = <0 25 0x4>;
+	clocks = <&gateclk 17>;
+	mrvl,clk-delay-cycles = <0x1F>;
+};