Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 19 insertions, 0 deletions

diff --git a/dts/Bindings/net/allwinner,sun4i-emac.txt b/dts/Bindings/net/allwinner,sun4i-emac.txt
new file mode 100644
index 0000000000..10640b17c8
--- /dev/null
+++ b/dts/Bindings/net/allwinner,sun4i-emac.txt
@@ -0,0 +1,19 @@
+* Allwinner EMAC ethernet controller
+
+Required properties:
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+              "allwinner,sun4i-emac")
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: see ethernet.txt file in the same directory.
+- clocks: A phandle to the reference clock for this device
+
+Example:
+
+emac: ethernet@01c0b000 {
+       compatible = "allwinner,sun4i-a10-emac";
+       reg = <0x01c0b000 0x1000>;
+       interrupts = <55>;
+       clocks = <&ahb_gates 17>;
+       phy = <&phy0>;
+};