Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

8 files changed, 308 insertions, 0 deletions

diff --git a/dts/Bindings/net/can/atmel-can.txt b/dts/Bindings/net/can/atmel-can.txt
new file mode 100644
index 0000000000..14e52a0d86
--- /dev/null
+++ b/dts/Bindings/net/can/atmel-can.txt
@@ -0,0 +1,14 @@
+* AT91 CAN *
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	can0: can@f000c000 {
+		compatible = "atmel,at91sam9x5-can";
+		reg = <0xf000c000 0x300>;
+		interrupts = <40 4 5>
+	};
diff --git a/dts/Bindings/net/can/c_can.txt b/dts/Bindings/net/can/c_can.txt
new file mode 100644
index 0000000000..8f1ae81228
--- /dev/null
+++ b/dts/Bindings/net/can/c_can.txt
@@ -0,0 +1,49 @@
+Bosch C_CAN/D_CAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible		: Should be "bosch,c_can" for C_CAN controllers and
+			  "bosch,d_can" for D_CAN controllers.
+- reg			: physical base address and size of the C_CAN/D_CAN
+			  registers map
+- interrupts		: property with a value describing the interrupt
+			  number
+
+Optional properties:
+- ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
+			  instance number
+
+Note: "ti,hwmods" field is used to fetch the base address and irq
+resources from TI, omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Example:
+
+Step1: SoC common .dtsi file
+
+	dcan1: d_can@481d0000 {
+		compatible = "bosch,d_can";
+		reg = <0x481d0000 0x2000>;
+		interrupts = <55>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
+(or)
+
+	dcan1: d_can@481d0000 {
+		compatible = "bosch,d_can";
+		ti,hwmods = "d_can1";
+		reg = <0x481d0000 0x2000>;
+		interrupts = <55>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
+Step 2: board specific .dts file
+
+	&dcan1 {
+		status = "okay";
+	};
diff --git a/dts/Bindings/net/can/cc770.txt b/dts/Bindings/net/can/cc770.txt
new file mode 100644
index 0000000000..77027bf646
--- /dev/null
+++ b/dts/Bindings/net/can/cc770.txt
@@ -0,0 +1,53 @@
+Memory mapped Bosch CC770 and Intel AN82527 CAN controller
+
+Note: The CC770 is a CAN controller from Bosch, which is 100%
+compatible with the old AN82527 from Intel, but with "bugs" being fixed.
+
+Required properties:
+
+- compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
+	for the AN82527.
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the controller. The size is usually 0x80.
+
+- interrupts : property with a value describing the interrupt source
+	(number and sensitivity) required for the controller.
+
+Optional properties:
+
+- bosch,external-clock-frequency : frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	controller is half of that value. If not specified, a default
+	value of 16000000 (16 MHz) is used.
+
+- bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
+	a resonable value will be calculated.
+
+- bosch,disconnect-rx0-input : see data sheet.
+
+- bosch,disconnect-rx1-input : see data sheet.
+
+- bosch,disconnect-tx1-output : see data sheet.
+
+- bosch,polarity-dominant : see data sheet.
+
+- bosch,divide-memory-clock : see data sheet.
+
+- bosch,iso-low-speed-mux : see data sheet.
+
+For further information, please have a look to the CC770 or AN82527.
+
+Examples:
+
+can@3,100 {
+	compatible = "bosch,cc770";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	bosch,external-clock-frequency = <16000000>;
+};
diff --git a/dts/Bindings/net/can/fsl-flexcan.txt b/dts/Bindings/net/can/fsl-flexcan.txt
new file mode 100644
index 0000000000..56d6cc336e
--- /dev/null
+++ b/dts/Bindings/net/can/fsl-flexcan.txt
@@ -0,0 +1,29 @@
+Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+Required properties:
+
+- compatible : Should be "fsl,<processor>-flexcan"
+
+  An implementation should also claim any of the following compatibles
+  that it is fully backwards compatible with:
+
+  - fsl,p1010-flexcan
+
+- reg : Offset and length of the register set for this device
+- interrupts : Interrupt tuple for this device
+
+Optional properties:
+
+- clock-frequency : The oscillator frequency driving the flexcan device
+
+- xceiver-supply: Regulator that powers the CAN transceiver
+
+Example:
+
+	can@1c000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <200000000>; // filled in by bootloader
+	};
diff --git a/dts/Bindings/net/can/grcan.txt b/dts/Bindings/net/can/grcan.txt
new file mode 100644
index 0000000000..34ef3498f8
--- /dev/null
+++ b/dts/Bindings/net/can/grcan.txt
@@ -0,0 +1,28 @@
+Aeroflex Gaisler GRCAN and GRHCAN CAN controllers.
+
+The GRCAN and CRHCAN CAN controllers are available in the GRLIB VHDL IP core
+library.
+
+Note: These properties are built from the AMBA plug&play in a Leon SPARC system
+(the ordinary environment for GRCAN and GRHCAN). There are no dts files for
+sparc.
+
+Required properties:
+
+- name : Should be "GAISLER_GRCAN", "01_03d", "GAISLER_GRHCAN" or "01_034"
+
+- reg : Address and length of the register set for the device
+
+- freq : Frequency of the external oscillator clock in Hz (the frequency of
+	the amba bus in the ordinary case)
+
+- interrupts : Interrupt number for this device
+
+Optional properties:
+
+- systemid : If not present or if the value of the least significant 16 bits
+	of this 32-bit property is smaller than GRCAN_TXBUG_SAFE_GRLIB_VERSION
+	a bug workaround is activated.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/dts/Bindings/net/can/microchip,mcp251x.txt b/dts/Bindings/net/can/microchip,mcp251x.txt
new file mode 100644
index 0000000000..ee3723beb7
--- /dev/null
+++ b/dts/Bindings/net/can/microchip,mcp251x.txt
@@ -0,0 +1,25 @@
+* Microchip MCP251X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+   - "microchip,mcp2510" for MCP2510.
+   - "microchip,mcp2515" for MCP2515.
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupt-parent: The parent interrupt controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+
+Example:
+	can0: can@1 {
+		compatible = "microchip,mcp2515";
+		reg = <1>;
+		clocks = <&clk24m>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <13 0x2>;
+		vdd-supply = <&reg5v0>;
+		xceiver-supply = <&reg5v0>;
+	};
diff --git a/dts/Bindings/net/can/mpc5xxx-mscan.txt b/dts/Bindings/net/can/mpc5xxx-mscan.txt
new file mode 100644
index 0000000000..2fa4fcd38f
--- /dev/null
+++ b/dts/Bindings/net/can/mpc5xxx-mscan.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				 "ref" for reference clock (XTAL)
+			   "ref" is default in case this property is not
+			   present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				"ref" for reference clock
+				"sys" for system clock
+			   If this property is not present, an optimal CAN
+			   clock source and frequency based on the system
+			   clock will be selected. If this is not possible,
+			   the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+			   clock divider can be specified. By default, a
+			   value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+	can@1300 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <12 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1300 0x80>;
+	};
+
+	can@1380 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <13 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1380 0x80>;
+		fsl,mscan-clock-source = "ref";
+		fsl,mscan-clock-divider = <3>;
+	};
diff --git a/dts/Bindings/net/can/sja1000.txt b/dts/Bindings/net/can/sja1000.txt
new file mode 100644
index 0000000000..b4a6d53fb0
--- /dev/null
+++ b/dts/Bindings/net/can/sja1000.txt
@@ -0,0 +1,57 @@
+Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+Required properties:
+
+- compatible : should be "nxp,sja1000".
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the SJA1000. The size is usually 0x80.
+
+- interrupts: property with a value describing the interrupt source
+	(number and sensitivity) required for the SJA1000.
+
+Optional properties:
+
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+	should be performed on the device.  Valid value is 1, 2 or 4.
+	Default to 1 (8 bits).
+
+- nxp,external-clock-frequency : Frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	SJA1000 is half of that value. If not specified, a default value
+	of 16000000 (16 MHz) is used.
+
+- nxp,tx-output-mode : operation mode of the TX output control logic:
+	<0x0> : bi-phase output mode
+	<0x1> : normal output mode (default)
+	<0x2> : test output mode
+	<0x3> : clock output mode
+
+- nxp,tx-output-config : TX output pin configuration:
+	<0x01> : TX0 invert
+	<0x02> : TX0 pull-down (default)
+	<0x04> : TX0 pull-up
+	<0x06> : TX0 push-pull
+	<0x08> : TX1 invert
+	<0x10> : TX1 pull-down
+	<0x20> : TX1 pull-up
+	<0x30> : TX1 push-pull
+
+- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
+
+For further information, please have a look to the SJA1000 data sheet.
+
+Examples:
+
+can@3,100 {
+	compatible = "nxp,sja1000";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	nxp,external-clock-frequency = <16000000>;
+};
+