dts: update to v4.6-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 38 insertions, 2 deletions

diff --git a/dts/Bindings/net/can/ifi_canfd.txt b/dts/Bindings/net/can/ifi_canfd.txt
new file mode 100644
index 0000000000..20ea5c70ab
--- /dev/null
+++ b/dts/Bindings/net/can/ifi_canfd.txt
@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+  - compatible: Should be "ifi,canfd-1.0"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	canfd0: canfd@ff220000 {
+		compatible = "ifi,canfd-1.0";
+		reg = <0xff220000 0x00001000>;
+		interrupts = <0 43 0>;
+	};
diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt
index 002d8440bf..8d40ab27bc 100644
--- a/dts/Bindings/net/can/rcar_can.txt
+++ b/dts/Bindings/net/can/rcar_can.txt
@@ -6,6 +6,17 @@ Required properties:
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
 	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
+	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
+	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
+	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
+	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
+	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
 - clocks: phandles and clock specifiers for 3 CAN clock inputs.
@@ -13,6 +24,15 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
+Required properties for "renesas,can-r8a7795" compatible:
+In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be
+used by both CAN and CAN FD controller at the same time. It needs to be scaled
+to maximum frequency if any of these controllers use it. This is done using
+the below properties.
+
+- assigned-clocks: phandle of clkp2(CANFD) clock.
+- assigned-clock-rates: maximum frequency of this clock.
+
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
@@ -25,7 +45,7 @@ Example
 SoC common .dtsi file:
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
 		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
diff --git a/dts/Bindings/net/can/sja1000.txt b/dts/Bindings/net/can/sja1000.txt
index b4a6d53fb0..ac3160eca9 100644
--- a/dts/Bindings/net/can/sja1000.txt
+++ b/dts/Bindings/net/can/sja1000.txt
@@ -2,7 +2,7 @@ Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
 
 Required properties:
 
-- compatible : should be "nxp,sja1000".
+- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
 
 - reg : should specify the chip select, address offset and size required
 	to map the registers of the SJA1000. The size is usually 0x80.
@@ -14,6 +14,7 @@ Optional properties:
 
 - reg-io-width : Specify the size (in bytes) of the IO accesses that
 	should be performed on the device.  Valid value is 1, 2 or 4.
+	This property is ignored for technologic version.
 	Default to 1 (8 bits).
 
 - nxp,external-clock-frequency : Frequency of the external oscillator