dts: update to v4.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 22 insertions, 1 deletions

diff --git a/dts/Bindings/net/dsa/qca8k.txt b/dts/Bindings/net/dsa/qca8k.txt
index 9c67ee4890..bbcb255c31 100644
--- a/dts/Bindings/net/dsa/qca8k.txt
+++ b/dts/Bindings/net/dsa/qca8k.txt
@@ -2,7 +2,10 @@
 
 Required properties:
 
-- compatible: should be "qca,qca8337"
+- compatible: should be one of:
+    "qca,qca8334"
+    "qca,qca8337"
+
 - #size-cells: must be 0
 - #address-cells: must be 1
 
@@ -14,6 +17,20 @@ port and PHY id, each subnode describing a port needs to have a valid phandle
 referencing the internal PHY connected to it. The CPU port of this switch is
 always port 0.
 
+A CPU port node has the following optional node:
+
+- fixed-link            : Fixed-link subnode describing a link to a non-MDIO
+                          managed entity. See
+                          Documentation/devicetree/bindings/net/fixed-link.txt
+                          for details.
+
+For QCA8K the 'fixed-link' sub-node supports only the following properties:
+
+- 'speed' (integer, mandatory), to indicate the link speed. Accepted
+  values are 10, 100 and 1000
+- 'full-duplex' (boolean, optional), to indicate that full duplex is
+  used. When absent, half duplex is assumed.
+
 Example:
 
 
@@ -53,6 +70,10 @@ Example:
 					label = "cpu";
 					ethernet = <&gmac1>;
 					phy-mode = "rgmii";
+					fixed-link {
+						speed = 1000;
+						full-duplex;
+					};
 				};
 
 				port@1 {