dts: update to v4.16-rc1

Also includeded:

ARM: dts: am33xx: do not delete no longer existing clocks

Several clocks are removed from the am33xx dts files with v4.16-rc1.
Remove the corresponding /delete-node/ directives aswell to avoid
dtc breakage.

Also included:

ARM: dts: imx6qdl: SolidRun: Fix upstream include

Upstream dts file way renamed, so change include name accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 11 insertions, 47 deletions

diff --git a/dts/Bindings/pci/samsung,exynos5440-pcie.txt b/dts/Bindings/pci/samsung,exynos5440-pcie.txt
index 34a11bfbfb..651d957d10 100644
--- a/dts/Bindings/pci/samsung,exynos5440-pcie.txt
+++ b/dts/Bindings/pci/samsung,exynos5440-pcie.txt
@@ -6,9 +6,6 @@ and thus inherits all the common properties defined in designware-pcie.txt.
 Required properties:
 - compatible: "samsung,exynos5440-pcie"
 - reg: base addresses and lengths of the PCIe controller,
-	the PHY controller, additional register for the PHY controller.
-	(Registers for the PHY controller are DEPRECATED.
-	 Use the PHY framework.)
 - reg-names : First name should be set to "elbi".
 	And use the "config" instead of getting the configuration address space
 	from "ranges".
@@ -23,49 +20,8 @@ For other common properties, refer to
 
 Example:
 
-SoC-specific DT Entry:
+SoC-specific DT Entry (with using PHY framework):
 
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000
-			0x270000 0x1000
-			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock 28>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <4>;
-	};
-
-	pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000
-			0x272000 0x1000
-			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock 29>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <4>;
-	};
-
-With using PHY framework:
 	pcie_phy0: pcie-phy@270000 {
 		...
 		reg = <0x270000 0x1000>, <0x271000 0x40>;
@@ -74,13 +30,21 @@ With using PHY framework:
 	};
 
 	pcie@290000 {
-		...
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
 		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
 		reg-names = "elbi", "config";
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
 		phys = <&pcie_phy0>;
 		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000
 			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
-		...
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <4>;
 	};
 
 Board-specific DT Entry: