dts: update to v5.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 58 deletions

diff --git a/dts/Bindings/phy/brcm-sata-phy.txt b/dts/Bindings/phy/brcm-sata-phy.txt
deleted file mode 100644
index c03ad21984..0000000000
--- a/dts/Bindings/phy/brcm-sata-phy.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Broadcom SATA3 PHY
-
-Required properties:
-- compatible: should be one or more of
-     "brcm,bcm7216-sata-phy"
-     "brcm,bcm7425-sata-phy"
-     "brcm,bcm7445-sata-phy"
-     "brcm,iproc-ns2-sata-phy"
-     "brcm,iproc-nsp-sata-phy"
-     "brcm,phy-sata3"
-     "brcm,iproc-sr-sata-phy"
-     "brcm,bcm63138-sata-phy"
-- address-cells: should be 1
-- size-cells: should be 0
-- reg: register ranges for the PHY PCB interface
-- reg-names: should be "phy" and "phy-ctrl"
-     The "phy-ctrl" registers are only required for
-     "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
-
-Sub-nodes:
-  Each port's PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- reg: the PHY number
-- phy-cells: generic PHY binding; must be 0
-
-Sub-nodes optional properties:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-     This property is not applicable for "brcm,iproc-ns2-sata-phy",
-     "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
-
-- brcm,rxaeq-mode: string that indicates the desired RX equalizer
-  mode, possible values are:
-	"off" (equivalent to not specifying the property)
-	"auto"
-	"manual" (brcm,rxaeq-value is used in that case)
-
-- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
-  equalizer value that should be used. Allowed range is 0..63.
-
-Example
-	sata-phy@f0458100 {
-		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
-		reg-names = "phy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		sata-phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};