diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2017-10-06 06:12:41 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2017-10-06 06:12:41 +0200 |
| commit | ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba (patch) | |
| tree | 031d15dcd26f5b737adddc5042a3ddabbb6051f7 /dts/Bindings/pinctrl/qcom,pmic-gpio.txt | |
| parent | 15af9fc8cc9e18409893d2375271d64cac76924a (diff) | |
| download | barebox-ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba.tar.gz barebox-ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba.tar.xz | |
dts: update to v4.14-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,pmic-gpio.txt')
| -rw-r--r-- | dts/Bindings/pinctrl/qcom,pmic-gpio.txt | 26 |
1 files changed, 25 insertions, 1 deletions
diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt index 8d893a8746..5b12c57e7f 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt @@ -16,6 +16,7 @@ PMIC's from Qualcomm. "qcom,pm8941-gpio" "qcom,pm8994-gpio" "qcom,pma8084-gpio" + "qcom,pmi8994-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 gpio1-gpio22 for pma8084 + gpio1-gpio10 for pmi8994 - function: Usage: required @@ -98,7 +100,10 @@ to specify in a pin configuration subnode: "dtest1", "dtest2", "dtest3", - "dtest4" + "dtest4", + And following values are supported by LV/MV GPIO subtypes: + "func3", + "func4" - bias-disable: Usage: optional @@ -183,6 +188,25 @@ to specify in a pin configuration subnode: Value type: <none> Definition: The specified pins are configured in open-source mode. +- qcom,analog-pass: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in analog-pass-through mode. + +- qcom,atest: + Usage: optional + Value type: <u32> + Definition: Selects ATEST rail to route to GPIO when it's configured + in analog-pass-through mode. + Valid values are 1-4 corresponding to ATEST1 to ATEST4. + +- qcom,dtest-buffer: + Usage: optional + Value type: <u32> + Definition: Selects DTEST rail to route to GPIO when it's configured + as digital input. + Valid values are 1-4 corresponding to DTEST1 to DTEST4. + Example: pm8921_gpio: gpio@150 { |