dts: update to v6.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

21 files changed, 660 insertions, 171 deletions

diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfce850c20..d19d65c870 100644
--- a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -46,6 +46,7 @@ properties:
       - allwinner,sun8i-v3s-pinctrl
       - allwinner,sun9i-a80-pinctrl
       - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
       - allwinner,sun50i-a100-pinctrl
@@ -80,9 +81,6 @@ properties:
       - const: hosc
       - const: losc
 
-  resets:
-    maxItems: 1
-
   gpio-controller: true
   interrupt-controller: true
   gpio-line-names: true
@@ -127,20 +125,17 @@ patternProperties:
 
     additionalProperties: false
 
-  "^vcc-p[a-hlm]-supply$":
+  "^vcc-p[a-ilm]-supply$":
     description:
       Power supplies for pin banks.
 
 required:
   - "#gpio-cells"
-  - "#interrupt-cells"
   - compatible
   - reg
-  - interrupts
   - clocks
   - clock-names
   - gpio-controller
-  - interrupt-controller
 
 allOf:
   # FIXME: We should have the pin bank supplies here, but not a lot of
@@ -149,6 +144,19 @@ allOf:
 
   - $ref: "pinctrl.yaml#"
   - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - allwinner,sun50i-h616-r-pinctrl
+
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupts
+        - interrupt-controller
+
+  - if:
       properties:
         compatible:
           enum:
@@ -175,6 +183,18 @@ allOf:
       properties:
         compatible:
           enum:
+            - allwinner,sun20i-d1-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - allwinner,sun9i-a80-pinctrl
 
     then:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index c689bea7ce..d3a8911728 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible:     Should be one of the following:
                     "aspeed,ast2400-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 9db904a528..5d2c1b1fb7 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
   			"aspeed,ast2500-scu", "syscon", "simple-mfd"
   			"aspeed,g5-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 3666ac5b65..e92686d2f0 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible: Should be one of the following:
                 "aspeed,ast2600-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml
new file mode 100644
index 0000000000..45ea565ce2
--- /dev/null
+++ b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the i.MX common pinctrl binding.
+  (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-iomuxc
+      - fsl,imx8qxp-iomuxc
+      - fsl,imx8dxl-iomuxc
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 3 integers and represents the pin ID, the mux value
+          and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+          specified using a PIN_FUNC_ID macro, which can be found in
+          <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+          the pad setting value like pull-up on this pin. Please refer to the
+          appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "pin_id" indicates the pin ID
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+        compatible = "fsl,imx8qxp-iomuxc";
+
+        pinctrl_lpuart0: lpuart0grp {
+            fsl,pins = <
+                111 0 0x06000020
+                112 0 0x06000020
+            >;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
index 47a56b83a6..7a11beb8f2 100644
--- a/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -152,7 +152,7 @@ examples:
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
 
-      uid {
+      button-uid {
         label = "UID";
         linux,code = <102>;
         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
deleted file mode 100644
index e0e886b735..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Device tree binding for NVIDIA Tegra DPAUX pad controller
-========================================================
-
-The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
-which can be assigned to either the DPAUX channel or to an I2C
-controller.
-
-This document defines the device-specific binding for the DPAUX pad
-controller. Refer to pinctrl-bindings.txt in this directory for generic
-information about pin controller device tree bindings. Please refer to
-the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
-details on the DPAUX binding.
-
-Pin muxing:
------------
-
-Child nodes contain the pinmux configurations following the conventions
-from the pinctrl-bindings.txt document.
-
-Since only three configurations are possible, only three child nodes are
-needed to describe the pin mux'ing options for the DPAUX pads.
-Furthermore, given that the pad functions are only applicable to a
-single set of pads, the child nodes only need to describe the pad group
-the functions are being applied to rather than the individual pads.
-
-Required properties:
-- groups: Must be "dpaux-io"
-- function: Must be either "aux", "i2c" or "off".
-
-Example:
---------
-
-	dpaux@545c0000 {
-		...
-
-		state_dpaux_aux: pinmux-aux {
-			groups = "dpaux-io";
-			function = "aux";
-		};
-
-		state_dpaux_i2c: pinmux-i2c {
-			groups = "dpaux-io";
-			function = "i2c";
-		};
-
-		state_dpaux_off: pinmux-off {
-			groups = "dpaux-io";
-			function = "off";
-		};
-	};
-
-	...
-
-	i2c@7000d100 {
-		...
-		pinctrl-0 = <&state_dpaux_i2c>;
-		pinctrl-1 = <&state_dpaux_off>;
-		pinctrl-names = "default", "idle";
-	};
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8186.yaml b/dts/Bindings/pinctrl/pinctrl-mt8186.yaml
index 8a2bb86082..1eeb885ce0 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8186.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8186.yaml
@@ -28,6 +28,8 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-line-names: true
+
   reg:
     description: |
       Physical address base for gpio base registers. There are 8 different GPIO
@@ -105,31 +107,8 @@ patternProperties:
           drive-strength:
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-          mediatek,drive-strength-adv:
-            description: |
-              Describe the specific driving setup property.
-              For I2C pins, the existing generic driving setup can only support
-              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
-              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-              driving setup, the existing generic setup will be disabled.
-              The specific driving setup is controlled by E1E0EN.
-              When E1=0/E0=0, the strength is 0.125mA.
-              When E1=0/E0=1, the strength is 0.25mA.
-              When E1=1/E0=0, the strength is 0.5mA.
-              When E1=1/E0=1, the strength is 1mA.
-              EN is used to enable or disable the specific driving setup.
-              Valid arguments are described as below:
-              0: (E1, E0, EN) = (0, 0, 0)
-              1: (E1, E0, EN) = (0, 0, 1)
-              2: (E1, E0, EN) = (0, 1, 0)
-              3: (E1, E0, EN) = (0, 1, 1)
-              4: (E1, E0, EN) = (1, 0, 0)
-              5: (E1, E0, EN) = (1, 0, 1)
-              6: (E1, E0, EN) = (1, 1, 0)
-              7: (E1, E0, EN) = (1, 1, 1)
-              So the valid arguments are from 0 to 7.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
 
           bias-pull-down:
             oneOf:
@@ -291,7 +270,7 @@ examples:
           pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
                    <PINMUX_GPIO128__FUNC_SDA0>;
           bias-pull-up = <MTK_PULL_SET_RSEL_001>;
-          mediatek,drive-strength-adv = <7>;
+          drive-strength-microamp = <1000>;
         };
       };
     };
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
index c90a132fbc..e0e943e5b8 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
@@ -80,46 +80,30 @@ patternProperties:
               dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-          mediatek,drive-strength-adv:
-            description: |
-              Describe the specific driving setup property.
-              For I2C pins, the existing generic driving setup can only support
-              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
-              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-              driving setup, the existing generic setup will be disabled.
-              The specific driving setup is controlled by E1E0EN.
-              When E1=0/E0=0, the strength is 0.125mA.
-              When E1=0/E0=1, the strength is 0.25mA.
-              When E1=1/E0=0, the strength is 0.5mA.
-              When E1=1/E0=1, the strength is 1mA.
-              EN is used to enable or disable the specific driving setup.
-              Valid arguments are described as below:
-              0: (E1, E0, EN) = (0, 0, 0)
-              1: (E1, E0, EN) = (0, 0, 1)
-              2: (E1, E0, EN) = (0, 1, 0)
-              3: (E1, E0, EN) = (0, 1, 1)
-              4: (E1, E0, EN) = (1, 0, 0)
-              5: (E1, E0, EN) = (1, 0, 1)
-              6: (E1, E0, EN) = (1, 1, 0)
-              7: (E1, E0, EN) = (1, 1, 1)
-              So the valid arguments are from 0 to 7.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3, 4, 5, 6, 7]
-
-          mediatek,pull-up-adv:
-            description: |
-              Pull up settings for 2 pull resistors, R0 and R1. User can
-              configure those special pins. Valid arguments are described as below:
-              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
-              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
-              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
-              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3]
-
-          bias-pull-down: true
-
-          bias-pull-up: true
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull down type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull up type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
 
           bias-disable: true
 
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
index c5b755514c..66fe17e9e4 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
@@ -29,6 +29,8 @@ properties:
     description: gpio valid number range.
     maxItems: 1
 
+  gpio-line-names: true
+
   reg:
     description: |
       Physical address base for gpio base registers. There are 8 GPIO
@@ -49,7 +51,7 @@ properties:
     description: The interrupt outputs to sysirq.
     maxItems: 1
 
-  mediatek,rsel_resistance_in_si_unit:
+  mediatek,rsel-resistance-in-si-unit:
     type: boolean
     description: |
       Identifying i2c pins pull up/down type which is RSEL. It can support
@@ -98,31 +100,8 @@ patternProperties:
           drive-strength:
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-          mediatek,drive-strength-adv:
-            description: |
-              Describe the specific driving setup property.
-              For I2C pins, the existing generic driving setup can only support
-              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
-              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-              driving setup, the existing generic setup will be disabled.
-              The specific driving setup is controlled by E1E0EN.
-              When E1=0/E0=0, the strength is 0.125mA.
-              When E1=0/E0=1, the strength is 0.25mA.
-              When E1=1/E0=0, the strength is 0.5mA.
-              When E1=1/E0=1, the strength is 1mA.
-              EN is used to enable or disable the specific driving setup.
-              Valid arguments are described as below:
-              0: (E1, E0, EN) = (0, 0, 0)
-              1: (E1, E0, EN) = (0, 0, 1)
-              2: (E1, E0, EN) = (0, 1, 0)
-              3: (E1, E0, EN) = (0, 1, 1)
-              4: (E1, E0, EN) = (1, 0, 0)
-              5: (E1, E0, EN) = (1, 0, 1)
-              6: (E1, E0, EN) = (1, 1, 0)
-              7: (E1, E0, EN) = (1, 1, 1)
-              So the valid arguments are from 0 to 7.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
 
           bias-pull-down:
             oneOf:
@@ -142,7 +121,7 @@ patternProperties:
               "MTK_PUPD_SET_R1R0_11" define in mt8195.
               For pull down type is RSEL, it can add RSEL define & resistance
               value(ohm) to set different resistance by identifying property
-              "mediatek,rsel_resistance_in_si_unit".
+              "mediatek,rsel-resistance-in-si-unit".
               It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
               & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
               & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -161,7 +140,7 @@ patternProperties:
               };
               An example of using si unit resistance value(ohm):
               &pio {
-                mediatek,rsel_resistance_in_si_unit;
+                mediatek,rsel-resistance-in-si-unit;
               }
               pincontroller {
                 i2c0_pin {
@@ -190,7 +169,7 @@ patternProperties:
               "MTK_PUPD_SET_R1R0_11" define in mt8195.
               For pull up type is RSEL, it can add RSEL define & resistance
               value(ohm) to set different resistance by identifying property
-              "mediatek,rsel_resistance_in_si_unit".
+              "mediatek,rsel-resistance-in-si-unit".
               It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
               & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
               & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -209,7 +188,7 @@ patternProperties:
               };
               An example of using si unit resistance value(ohm):
               &pio {
-                mediatek,rsel_resistance_in_si_unit;
+                mediatek,rsel-resistance-in-si-unit;
               }
               pincontroller {
                 i2c0-pins {
@@ -302,7 +281,7 @@ examples:
           pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
                    <PINMUX_GPIO9__FUNC_SCL0>;
           bias-disable;
-          mediatek,drive-strength-adv = <7>;
+          drive-strength-microamp = <1000>;
         };
       };
     };
diff --git a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index b83c7f476e..931e5c190e 100644
--- a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -144,7 +144,7 @@ examples:
               #interrupt-cells = <2>;
               gpio-controller;
               #gpio-cells = <2>;
-              gpio-ranges = <&tlmm 0 80>;
+              gpio-ranges = <&tlmm 0 0 80>;
 
               serial3-pinmux {
                       pins = "gpio44", "gpio45";
diff --git a/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
new file mode 100644
index 0000000000..e035300914
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8909 TLMM block
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the MSM8909 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8909-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8909-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-msm8909-tlmm-state"
+
+$defs:
+  qcom-msm8909-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
+                      qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
+                bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
+                blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
+                blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
+                blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
+                cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
+                dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
+                ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
+                gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
+                pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
+                prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
+                qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
+                smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
+                wcss_bt, wcss_fm, wcss_wlan ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        pinctrl@1000000 {
+                compatible = "qcom,msm8909-tlmm";
+                reg = <0x1000000 0x300000>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio4";
+                                function = "blsp_uart1";
+                                bias-pull-up;
+                        };
+
+                        tx {
+                                pins = "gpio5";
+                                function = "blsp_uart1";
+                                bias-disable;
+                        };
+                };
+        };
+...
diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
index 6f2efc3772..694898f382 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -52,6 +52,7 @@ properties:
           - qcom,pmi8998-gpio
           - qcom,pmk8350-gpio
           - qcom,pmm8155au-gpio
+          - qcom,pmp8074-gpio
           - qcom,pmr735a-gpio
           - qcom,pmr735b-gpio
           - qcom,pms405-gpio
@@ -158,6 +159,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,pm8226-gpio
               - qcom,pm8350b-gpio
               - qcom,pm8950-gpio
     then:
@@ -233,6 +235,7 @@ allOf:
               - qcom,pm8150b-gpio
               - qcom,pm8150l-gpio
               - qcom,pmc8180c-gpio
+              - qcom,pmp8074-gpio
               - qcom,pms405-gpio
     then:
       properties:
@@ -415,6 +418,7 @@ $defs:
                  - gpio1-gpio10 for pmi8994
                  - gpio1-gpio4 for pmk8350
                  - gpio1-gpio10 for pmm8155au
+                 - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12)
                  - gpio1-gpio4 for pmr735a
                  - gpio1-gpio4 for pmr735b
                  - gpio1-gpio12 for pms405 (holes on gpio1, gpio9
diff --git a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index d32ee32776..33d1d37fdf 100644
--- a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -19,6 +19,11 @@ properties:
   compatible:
     const: qcom,sc7280-lpass-lpi-pinctrl
 
+  qcom,adsp-bypass-mode:
+    description:
+      Tells ADSP is in bypass mode.
+    type: boolean
+
   reg:
     minItems: 2
     maxItems: 2
diff --git a/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
new file mode 100644
index 0000000000..3908807a83
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6375 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6375 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6375-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm6375-tlmm-state"
+
+$defs:
+  qcom-sm6375-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
+                gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
+                m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
+                nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+                phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
+                qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
+                sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1 ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@500000 {
+                compatible = "qcom,sm6375-tlmm";
+                reg = <0x00500000 0x800000>;
+                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 157>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio18";
+                                function = "qup13_f2";
+                                bias-pull-up;
+                        };
+
+                        tx {
+                                pins = "gpio19";
+                                function = "qup13_f2";
+                                bias-disable;
+                        };
+                };
+        };
+...
diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml
index 2a57df75d8..4fc758fea7 100644
--- a/dts/Bindings/pinctrl/renesas,pfc.yaml
+++ b/dts/Bindings/pinctrl/renesas,pfc.yaml
@@ -45,6 +45,7 @@ properties:
       - renesas,pfc-r8a77995    # R-Car D3
       - renesas,pfc-r8a779a0    # R-Car V3U
       - renesas,pfc-r8a779f0    # R-Car S4-8
+      - renesas,pfc-r8a779g0    # R-Car V4H
       - renesas,pfc-sh73a0      # SH-Mobile AG5
 
   reg:
diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 52df1b1461..997b746391 100644
--- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -47,6 +47,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
   clocks:
     maxItems: 1
 
@@ -110,6 +121,8 @@ required:
   - gpio-controller
   - '#gpio-cells'
   - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
   - clocks
   - power-domains
   - resets
@@ -126,6 +139,8 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
             gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
             clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
             resets = <&cpg R9A07G044_GPIO_RSTN>,
                      <&cpg R9A07G044_GPIO_PORT_RESETN>,
diff --git a/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
new file mode 100644
index 0000000000..eac6245db7
--- /dev/null
+++ b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+description:
+  The Renesas RZ/V2M SoC features a combined Pin and GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 16 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-pinctrl # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZV2M_GPIO(8, 1)" for P8_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description: INEXINT[0..38] corresponding to individual pin inputs.
+    maxItems: 39
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZV2M_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>.
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength-microamp:
+          # Superset of supported values
+          enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000,
+                  9000, 9600, 11000, 12000, 13000, 18000 ]
+        slew-rate:
+          description: 0 is slow slew rate, 1 is fast slew rate
+          enum: [ 0, 1 ]
+        gpio-hog: true
+        gpios: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl: pinctrl@b6250000 {
+            compatible = "renesas,r9a09g011-pinctrl";
+            reg = <0xb6250000 0x800>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 352>;
+            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+            resets = <&cpg R9A09G011_PFC_PRESETN>;
+            power-domains = <&cpg>;
+
+            i2c2_pins: i2c2 {
+                    pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+                             <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+            };
+    };
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index 335ffc1353..d35dcc4f02 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -59,6 +59,7 @@ properties:
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
     properties:
       gpio-controller: true
       '#gpio-cells':
@@ -68,8 +69,7 @@ patternProperties:
         maxItems: 1
       clocks:
         maxItems: 1
-      reset:
-        minItems: 1
+      resets:
         maxItems: 1
       gpio-ranges:
         minItems: 1
diff --git a/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
index d8e75b3e64..15092fdd4b 100644
--- a/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -288,11 +288,14 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 examples:
   - |
     #include <dt-bindings/pinctrl/sppctl-sp7021.h>
 
-    pinctl@9c000100 {
+    pinctrl@9c000100 {
         compatible = "sunplus,sp7021-pctl";
         reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
               <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
diff --git a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 2722dc7bb0..1e2b9b627b 100644
--- a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -274,6 +274,10 @@ patternProperties:
           slew-rate:
             enum: [0, 1]
 
+          output-enable:
+            description:
+              This will internally disable the tri-state for MIO pins.
+
           drive-strength:
             description:
               Selects the drive strength for MIO pins, in mA.