diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-25 11:22:32 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-28 09:08:46 +0200 |
commit | 00ce25c6dcdae5582ae4be37147ab33678adc995 (patch) | |
tree | 41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/regulator/tps62360-regulator.txt | |
parent | 0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff) | |
download | barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz |
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:
git://xenbits.xen.org/people/ianc/device-tree-rebasing.git
The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.
To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/regulator/tps62360-regulator.txt')
-rw-r--r-- | dts/Bindings/regulator/tps62360-regulator.txt | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/dts/Bindings/regulator/tps62360-regulator.txt b/dts/Bindings/regulator/tps62360-regulator.txt new file mode 100644 index 0000000000..1b20c3dbcd --- /dev/null +++ b/dts/Bindings/regulator/tps62360-regulator.txt @@ -0,0 +1,44 @@ +TPS62360 Voltage regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps62360" + "ti,tps62361", + "ti,tps62362", + "ti,tps62363", +- reg: I2C slave address + +Optional properties: +- ti,enable-vout-discharge: Enable output discharge. This is boolean value. +- ti,enable-pull-down: Enable pull down. This is boolean value. +- ti,vsel0-gpio: GPIO for controlling VSEL0 line. + If this property is missing, then assume that there is no GPIO + for vsel0 control. +- ti,vsel1-gpio: Gpio for controlling VSEL1 line. + If this property is missing, then assume that there is no GPIO + for vsel1 control. +- ti,vsel0-state-high: Initial state of vsel0 input is high. + If this property is missing, then assume the state as low (0). +- ti,vsel1-state-high: Initial state of vsel1 input is high. + If this property is missing, then assume the state as low (0). + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + abc: tps62360 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on + ti,vsel0-gpio = <&gpio1 16 0>; + ti,vsel1-gpio = <&gpio1 17 0>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-force-pwm; + ti,enable-vout-discharge; + }; |