Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 26 insertions, 0 deletions

diff --git a/dts/Bindings/serial/arc-uart.txt b/dts/Bindings/serial/arc-uart.txt
new file mode 100644
index 0000000000..5cae2eb686
--- /dev/null
+++ b/dts/Bindings/serial/arc-uart.txt
@@ -0,0 +1,26 @@
+* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards
+
+Required properties:
+- compatible		: "snps,arc-uart"
+- reg			: offset and length of the register set for the device.
+- interrupts		: device interrupt
+- clock-frequency	: the input clock frequency for the UART
+- current-speed		: baud rate for UART
+
+e.g.
+
+arcuart0: serial@c0fc1000 {
+	compatible = "snps,arc-uart";
+	reg = <0xc0fc1000 0x100>;
+	interrupts = <5>;
+	clock-frequency = <80000000>;
+	current-speed = <115200>;
+	status = "okay";
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+	serial0 = &arcuart0;
+};