dts: update to v4.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 19 insertions, 9 deletions

diff --git a/dts/Bindings/soc/mediatek/scpsys.txt b/dts/Bindings/soc/mediatek/scpsys.txt
index b1d165b4d4..40056f7990 100644
--- a/dts/Bindings/soc/mediatek/scpsys.txt
+++ b/dts/Bindings/soc/mediatek/scpsys.txt
@@ -12,11 +12,13 @@ power/power_domain.txt. It provides the power domains defined in
 - include/dt-bindings/power/mt8173-power.h
 - include/dt-bindings/power/mt6797-power.h
 - include/dt-bindings/power/mt2701-power.h
+- include/dt-bindings/power/mt7622-power.h
 
 Required properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-scpsys"
 	- "mediatek,mt6797-scpsys"
+	- "mediatek,mt7622-scpsys"
 	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
@@ -26,6 +28,7 @@ Required properties:
                       enabled before enabling certain power domains.
 	Required clocks for MT2701: "mm", "mfg", "ethif"
 	Required clocks for MT6797: "mm", "mfg", "vdec"
+	Required clocks for MT7622: "hif_sel"
 	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:
diff --git a/dts/Bindings/soc/qcom/qcom,glink.txt b/dts/Bindings/soc/qcom/qcom,glink.txt
index 50fc20c6ce..b277eca861 100644
--- a/dts/Bindings/soc/qcom/qcom,glink.txt
+++ b/dts/Bindings/soc/qcom/qcom,glink.txt
@@ -1,11 +1,12 @@
-Qualcomm RPM GLINK binding
+Qualcomm GLINK edge binding
 
-This binding describes the Qualcomm RPM GLINK, a fifo based mechanism for
-communication with the Resource Power Management system on various Qualcomm
-platforms.
+This binding describes a Qualcomm GLINK edge, a fifo based mechanism for
+communication between subsystem-pairs on various Qualcomm platforms. Two types
+of edges can be described by the binding; the GLINK RPM edge and a SMEM based
+edge.
 
 - compatible:
-	Usage: required
+	Usage: required for glink-rpm
 	Value type: <stringlist>
 	Definition: must be "qcom,glink-rpm"
 
@@ -16,7 +17,7 @@ platforms.
 		    signal this processor about communication related events
 
 - qcom,rpm-msg-ram:
-	Usage: required
+	Usage: required for glink-rpm
 	Value type: <prop-encoded-array>
 	Definition: handle to RPM message memory resource
 
diff --git a/dts/Bindings/soc/qcom/qcom,gsbi.txt b/dts/Bindings/soc/qcom/qcom,gsbi.txt
index 2f5ede39be..fe1855f09d 100644
--- a/dts/Bindings/soc/qcom/qcom,gsbi.txt
+++ b/dts/Bindings/soc/qcom/qcom,gsbi.txt
@@ -78,7 +78,6 @@ Example for APQ8064:
 			interrupts = <0 152 0x0>;
 			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 			clock-names = "core", "iface";
-			status = "ok";
 		};
 	};
 
diff --git a/dts/Bindings/soc/rockchip/grf.txt b/dts/Bindings/soc/rockchip/grf.txt
index cc9f05d3cb..7dc5ce858a 100644
--- a/dts/Bindings/soc/rockchip/grf.txt
+++ b/dts/Bindings/soc/rockchip/grf.txt
@@ -21,6 +21,7 @@ Required Properties:
    - "rockchip,rk3328-grf", "syscon": for rk3328
    - "rockchip,rk3368-grf", "syscon": for rk3368
    - "rockchip,rk3399-grf", "syscon": for rk3399
+   - "rockchip,rv1108-grf", "syscon": for rv1108
 - compatible: PMUGRF should be one of the following:
    - "rockchip,rk3368-pmugrf", "syscon": for rk3368
    - "rockchip,rk3399-pmugrf", "syscon": for rk3399
@@ -28,6 +29,8 @@ Required Properties:
    - "rockchip,rk3288-sgrf", "syscon": for rk3288
 - compatible: USB2PHYGRF should be one of the followings
    - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
+- compatible: USBGRF should be one of the following
+   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
 - reg: physical base address of the controller and length of memory mapped
   region.
 
diff --git a/dts/Bindings/soc/rockchip/power_domain.txt b/dts/Bindings/soc/rockchip/power_domain.txt
index 01bfb6745f..301d2a9bc1 100644
--- a/dts/Bindings/soc/rockchip/power_domain.txt
+++ b/dts/Bindings/soc/rockchip/power_domain.txt
@@ -7,6 +7,7 @@ Required properties for power domain controller:
 - compatible: Should be one of the following.
 	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
 	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
+	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
 	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
 	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
 - #power-domain-cells: Number of cells in a power-domain specifier.
@@ -18,6 +19,7 @@ Required properties for power domain sub nodes:
 - reg: index of the power domain, should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
 	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
+	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
 	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
 	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
 - clocks (optional): phandles to clocks which need to be enabled while power domain
@@ -93,6 +95,7 @@ power domain to use.
 The index should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
 	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
+	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
 	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
 	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
 
diff --git a/dts/Bindings/soc/ti/sci-pm-domain.txt b/dts/Bindings/soc/ti/sci-pm-domain.txt
index c705db07d8..66e6265fb0 100644
--- a/dts/Bindings/soc/ti/sci-pm-domain.txt
+++ b/dts/Bindings/soc/ti/sci-pm-domain.txt
@@ -46,12 +46,13 @@ Required Properties:
 - power-domains: phandle pointing to the corresponding PM domain node
 		 and an ID representing the device.
 
-See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list
+of valid identifiers for k2g.
 
 Example (K2G):
 --------------------
 	uart0: serial@02530c00 {
 		compatible = "ns16550a";
 		...
-		power-domains = <&k2g_pds K2G_DEV_UART0>;
+		power-domains = <&k2g_pds 0x002c>;
 	};