dts: update to v6.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 44 deletions

diff --git a/dts/Bindings/sound/max98504.txt b/dts/Bindings/sound/max98504.txt
deleted file mode 100644
index 583ed5fdfb..0000000000
--- a/dts/Bindings/sound/max98504.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Maxim MAX98504 class D mono speaker amplifier
-
-This device supports I2C control interface and an IRQ output signal. It features
-a PCM and PDM digital audio interface (DAI) and a differential analog input.
-
-Required properties:
-
- - compatible : "maxim,max98504"
- - reg : should contain the I2C slave device address
- - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
-   as covered in ../regulator/regulator.txt
- - interrupts : should specify the interrupt line the device is connected to,
-   as described in ../interrupt-controller/interrupts.txt
-
-Optional properties:
-
- - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
-   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
- - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
-   applied during the "attack hold" and "timed hold" phase, the value must be
-   from 0...6 (dB) range
- - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
-   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
- - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
-   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
- - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
-   0...255 (VBATBROWN_RELEASE, register 0x001A)
-
-The default value when the above properties are not specified is 0,
-the maxim,brownout-threshold property must be specified to actually enable
-the PVDD brownout protection.
-
-Example:
-
- max98504@31 {
-	compatible = "maxim,max98504";
-	reg = <0x31>;
-	interrupt-parent = <&gpio_bank_0>;
-	interrupts = <2 0>;
-
-	DVDD-supply = <&regulator>;
-	DIOVDD-supply = <&regulator>;
-	PVDD-supply = <&regulator>;
-};