Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 41 insertions, 0 deletions

diff --git a/dts/Bindings/sound/sirf-audio.txt b/dts/Bindings/sound/sirf-audio.txt
new file mode 100644
index 0000000000..c88882ca37
--- /dev/null
+++ b/dts/Bindings/sound/sirf-audio.txt
@@ -0,0 +1,41 @@
+* SiRF atlas6 and prima2 internal audio codec and port based audio setups
+
+Required properties:
+- compatible: "sirf,sirf-audio-card"
+- sirf,audio-platform: phandle for the platform node
+- sirf,audio-codec: phandle for the SiRF internal codec node
+
+Optional properties:
+- hp-pa-gpios: Need to be present if the board need control external
+  headphone amplifier.
+- spk-pa-gpios: Need to be present if the board need control external
+  speaker amplifier.
+- hp-switch-gpios: Need to be present if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Ext Spk
+ * Line In
+ * Mic
+
+SiRF internal audio codec pins:
+ * HPOUTL
+ * HPOUTR
+ * SPKOUT
+ * Ext Mic
+ * Mic Bias
+
+Example:
+
+sound {
+		compatible = "sirf,sirf-audio-card";
+		sirf,audio-codec = <&audiocodec>;
+		sirf,audio-platform = <&audioport>;
+		hp-pa-gpios = <&gpio 44 0>;
+		spk-pa-gpios = <&gpio 46 0>;
+		hp-switch-gpios = <&gpio 45 0>;
+};
+