dts: update to v4.4-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 10 insertions, 1 deletions

diff --git a/dts/Bindings/sound/tdm-slot.txt b/dts/Bindings/sound/tdm-slot.txt
index 6a2c84247f..34cf70e2cb 100644
--- a/dts/Bindings/sound/tdm-slot.txt
+++ b/dts/Bindings/sound/tdm-slot.txt
@@ -4,11 +4,15 @@ This specifies audio DAI's TDM slot.
 
 TDM slot properties:
 dai-tdm-slot-num : Number of slots in use.
-dai-tdm-slot-width :  Width in bits for each slot.
+dai-tdm-slot-width : Width in bits for each slot.
+dai-tdm-slot-tx-mask : Transmit direction slot mask, optional
+dai-tdm-slot-rx-mask : Receive direction slot mask, optional
 
 For instance:
 	dai-tdm-slot-num = <2>;
 	dai-tdm-slot-width = <8>;
+	dai-tdm-slot-tx-mask = <0 1>;
+	dai-tdm-slot-rx-mask = <1 0>;
 
 And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
 to specify a explicit mapping of the channels and the slots. If it's absent
@@ -18,3 +22,8 @@ tx and rx masks.
 For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
 for an active slot as default, and the default active bits are at the LSB of
 the masks.
+
+The explicit masks are given as array of integers, where the first
+number presents bit-0 (LSB), second presents bit-1, etc. Any non zero
+number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask()
+does not do anything, if either mask is set non zero value.