summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2015-12-08 07:33:36 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2015-12-10 08:48:39 +0100
commita05d5c206c91b17eb13ab9631d93e0a9b6fb92f8 (patch)
tree69bb9a750c3f22308887a30b37e946b2738e33d4 /dts/Bindings/sound
parent48c682bcb09e2073d7eb07b4ce2ffbbf20d02d59 (diff)
downloadbarebox-a05d5c206c91b17eb13ab9631d93e0a9b6fb92f8.tar.gz
dts: update to v4.3-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/sound')
-rw-r--r--dts/Bindings/sound/cs4349.txt19
-rw-r--r--dts/Bindings/sound/ics43432.txt17
-rw-r--r--dts/Bindings/sound/max98357a.txt6
-rw-r--r--dts/Bindings/sound/nvidia,tegra30-hda.txt8
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt22
-rw-r--r--dts/Bindings/sound/renesas,rsrc-card.txt7
-rw-r--r--dts/Bindings/sound/rockchip-max98090.txt19
-rw-r--r--dts/Bindings/sound/rockchip-rt5645.txt17
-rw-r--r--dts/Bindings/sound/st,sti-asoc-card.txt155
9 files changed, 265 insertions, 5 deletions
diff --git a/dts/Bindings/sound/cs4349.txt b/dts/Bindings/sound/cs4349.txt
new file mode 100644
index 0000000..54c117b
--- /dev/null
+++ b/dts/Bindings/sound/cs4349.txt
@@ -0,0 +1,19 @@
+CS4349 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs4349"
+
+ - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+ - reset-gpios : a GPIO spec for the reset pin.
+
+Example:
+
+codec: cs4349@48 {
+ compatible = "cirrus,cs4349";
+ reg = <0x48>;
+ reset-gpios = <&gpio 54 0>;
+};
diff --git a/dts/Bindings/sound/ics43432.txt b/dts/Bindings/sound/ics43432.txt
new file mode 100644
index 0000000..b02e3a6
--- /dev/null
+++ b/dts/Bindings/sound/ics43432.txt
@@ -0,0 +1,17 @@
+Invensense ICS-43432 MEMS microphone with I2S output.
+
+There are no software configuration options for this device, indeed, the only
+host connection is the I2S interface. Apart from requirements on clock
+frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
+64 clock cycles in each stereo output frame; 24 of the 32 available bits
+contain audio data. A hardware pin determines if the device outputs data
+on the left or right channel of the I2S frame.
+
+Required properties:
+ - compatible : Must be "invensense,ics43432"
+
+Example:
+
+ ics43432: ics43432 {
+ compatible = "invensense,ics43432";
+ };
diff --git a/dts/Bindings/sound/max98357a.txt b/dts/Bindings/sound/max98357a.txt
index a7a149a..28645a2 100644
--- a/dts/Bindings/sound/max98357a.txt
+++ b/dts/Bindings/sound/max98357a.txt
@@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC.
Required properties:
- compatible : "maxim,max98357a"
-- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin
+
+Optional properties:
+- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
+ If this option is not specified then driver does not manage
+ the pin state (e.g. chip is always on).
Example:
diff --git a/dts/Bindings/sound/nvidia,tegra30-hda.txt b/dts/Bindings/sound/nvidia,tegra30-hda.txt
index 13e2ef4..275c6ea 100644
--- a/dts/Bindings/sound/nvidia,tegra30-hda.txt
+++ b/dts/Bindings/sound/nvidia,tegra30-hda.txt
@@ -8,10 +8,10 @@ Required properties:
- interrupts : The interrupt from the HDA controller.
- clocks : Must contain an entry for each required entry in clock-names.
See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
-- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
Example:
@@ -24,7 +24,7 @@ hda@0,70030000 {
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
- <&tegra_car 128>; /* hda2hdmi */
- <&tegra_car 111>, /* hda2codec_2x */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
};
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index b6b3a78..1173395 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -18,6 +18,12 @@ Required properties:
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
+- rcar_sound,ctu : Should contain CTU feature.
+ The number of CTU subnode should be same as HW.
+ see below for detail.
+- rcar_sound,mix : Should contain MIX feature.
+ The number of MIX subnode should be same as HW.
+ see below for detail.
- rcar_sound,dvc : Should contain DVC feature.
The number of DVC subnode should be same as HW.
see below for detail.
@@ -90,6 +96,22 @@ rcar_sound: sound@ec500000 {
};
};
+ rcar_sound,mix {
+ mix0: mix@0 { };
+ mix1: mix@1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu@0 { };
+ ctu01: ctu@1 { };
+ ctu02: ctu@2 { };
+ ctu03: ctu@3 { };
+ ctu10: ctu@4 { };
+ ctu11: ctu@5 { };
+ ctu12: ctu@6 { };
+ ctu13: ctu@7 { };
+ };
+
rcar_sound,src {
src0: src@0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/sound/renesas,rsrc-card.txt b/dts/Bindings/sound/renesas,rsrc-card.txt
index c641550..962748a 100644
--- a/dts/Bindings/sound/renesas,rsrc-card.txt
+++ b/dts/Bindings/sound/renesas,rsrc-card.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible : "renesas,rsrc-card,<board>"
Examples with soctypes are:
+ - "renesas,rsrc-card"
- "renesas,rsrc-card,lager"
- "renesas,rsrc-card,koelsch"
Optional properties:
@@ -29,6 +30,12 @@ Optional subnode properties:
- frame-inversion : bool property. Add this if the
dai-link uses frame clock inversion.
- convert-rate : platform specified sampling rate convert
+- audio-prefix : see audio-routing
+- audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources.
+ use audio-prefix if some components is using same sink/sources naming.
+ it can be used if compatible was "renesas,rsrc-card";
Required CPU/CODEC subnodes properties:
diff --git a/dts/Bindings/sound/rockchip-max98090.txt b/dts/Bindings/sound/rockchip-max98090.txt
new file mode 100644
index 0000000..a805aa9
--- /dev/null
+++ b/dts/Bindings/sound/rockchip-max98090.txt
@@ -0,0 +1,19 @@
+ROCKCHIP with MAX98090 CODEC
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-max98090"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+ connected to the CODEC
+- rockchip,audio-codec: The phandle of the MAX98090 audio codec
+- rockchip,headset-codec: The phandle of Ext chip for jack detection
+
+Example:
+
+sound {
+ compatible = "rockchip,rockchip-audio-max98090";
+ rockchip,model = "ROCKCHIP-I2S";
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,audio-codec = <&max98090>;
+ rockchip,headset-codec = <&headsetcodec>;
+};
diff --git a/dts/Bindings/sound/rockchip-rt5645.txt b/dts/Bindings/sound/rockchip-rt5645.txt
new file mode 100644
index 0000000..411a62b
--- /dev/null
+++ b/dts/Bindings/sound/rockchip-rt5645.txt
@@ -0,0 +1,17 @@
+ROCKCHIP with RT5645/RT5650 CODECS
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-rt5645"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+ connected to the CODEC
+- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec
+
+Example:
+
+sound {
+ compatible = "rockchip,rockchip-audio-rt5645";
+ rockchip,model = "ROCKCHIP-I2S";
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,audio-codec = <&rt5645>;
+};
diff --git a/dts/Bindings/sound/st,sti-asoc-card.txt b/dts/Bindings/sound/st,sti-asoc-card.txt
new file mode 100644
index 0000000..028fa1c
--- /dev/null
+++ b/dts/Bindings/sound/st,sti-asoc-card.txt
@@ -0,0 +1,155 @@
+STMicroelectronics sti ASoC cards
+
+The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
+codec or external codecs.
+
+sti sound drivers allows to expose sti SoC audio interface through the
+generic ASoC simple card. For details about sound card declaration please refer to
+Documentation/devicetree/bindings/sound/simple-card.txt.
+
+1) sti-uniperiph-dai: audio dai device.
+---------------------------------------
+
+Required properties:
+ - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
+
+ - st,syscfg: phandle to boot-device system configuration registers
+
+ - clock-names: name of the clocks listed in clocks property in the same order
+
+ - reg: CPU DAI IP Base address and size entries, listed in same
+ order than the CPU_DAI properties.
+
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+
+ - interrupts: CPU_DAI interrupt line, listed in the same order than the
+ CPU_DAI properties.
+
+ - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
+ order than the CPU_DAI properties.
+
+ - dma-names: identifier string for each DMA request line in the dmas property.
+ "tx" for "st,sti-uni-player" compatibility
+ "rx" for "st,sti-uni-reader" compatibility
+
+ - version: IP version integrated in SOC.
+
+ - dai-name: DAI name that describes the IP.
+
+Required properties ("st,sti-uni-player" compatibility only):
+ - clocks: CPU_DAI IP clock source, listed in the same order than the
+ CPU_DAI properties.
+
+ - uniperiph-id: internal SOC IP instance ID.
+
+ - IP mode: IP working mode depending on associated codec.
+ "HDMI" connected to HDMI codec IP and IEC HDMI formats.
+ "SPDIF"connected to SPDIF codec and support SPDIF formats.
+ "PCM" PCM standard mode for I2S or TDM bus.
+
+Optional properties:
+ - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
+ external codecs connection.
+
+ - pinctrl-names: should contain only one value - "default".
+
+Example:
+
+ sti_uni_player2: sti-uni-player@2 {
+ compatible = "st,sti-uni-player";
+ status = "okay";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+ reg = <0x8D82000 0x158>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 4 0 1>;
+ dai-name = "Uni Player #1 (DAC)";
+ dma-names = "tx";
+ uniperiph-id = <2>;
+ version = <5>;
+ mode = "PCM";
+ };
+
+ sti_uni_player3: sti-uni-player@3 {
+ compatible = "st,sti-uni-player";
+ status = "okay";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+ reg = <0x8D85000 0x158>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 7 0 1>;
+ dma-names = "tx";
+ dai-name = "Uni Player #1 (PIO)";
+ uniperiph-id = <3>;
+ version = <5>;
+ mode = "SPDIF";
+ };
+
+ sti_uni_reader1: sti-uni-reader@1 {
+ compatible = "st,sti-uni-reader";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ reg = <0x8D84000 0x158>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 6 0 1>;
+ dma-names = "rx";
+ dai-name = "Uni Reader #1 (HDMI RX)";
+ version = <3>;
+ };
+
+2) sti-sas-codec: internal audio codec IPs driver
+-------------------------------------------------
+
+Required properties:
+ - compatible: "st,sti<chip>-sas-codec" .
+ Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec"
+
+ - st,syscfg: phandle to boot-device system configuration registers.
+
+ - pinctrl-0: SPDIF PIO description.
+
+ - pinctrl-names: should contain only one value - "default".
+
+Example:
+ sti_sas_codec: sti-sas-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ st,reg_audio = <&syscfg_core>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif_out >;
+ };
+
+Example of audio card declaration:
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sti audio card";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ /* DAC */
+ format = "i2s";
+ dai-tdm-slot-width = <32>;
+ cpu {
+ sound-dai = <&sti_uni_player2>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 {
+ /* SPDIF */
+ format = "left_j";
+ cpu {
+ sound-dai = <&sti_uni_player3>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 0>;
+ };
+ };
+ };