summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound
diff options
context:
space:
mode:
authorLucas Stach <l.stach@pengutronix.de>2017-07-31 20:03:05 +0200
committerLucas Stach <l.stach@pengutronix.de>2017-07-31 20:03:05 +0200
commitd14b844b08635c717fb52a294ed8d6872e260315 (patch)
tree18607dcdd29688b2fa9528f79423183a68e9898d /dts/Bindings/sound
parent858b797e529e26c19bfa893fdb37ed67ff7a6006 (diff)
downloadbarebox-d14b844b08635c717fb52a294ed8d6872e260315.tar.gz
dts: update to v4.13-rc2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Diffstat (limited to 'dts/Bindings/sound')
-rw-r--r--dts/Bindings/sound/audio-graph-card.txt129
-rw-r--r--dts/Bindings/sound/audio-graph-scu-card.txt122
-rw-r--r--dts/Bindings/sound/cs35l35.txt3
-rw-r--r--dts/Bindings/sound/nau8825.txt3
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt37
-rw-r--r--dts/Bindings/sound/rockchip,pdm.txt39
-rw-r--r--dts/Bindings/sound/rockchip-spdif.txt2
-rw-r--r--dts/Bindings/sound/samsung,odroid.txt15
-rw-r--r--dts/Bindings/sound/simple-scu-card.txt67
-rw-r--r--dts/Bindings/sound/st,stm32-i2s.txt62
-rw-r--r--dts/Bindings/sound/st,stm32-sai.txt41
-rw-r--r--dts/Bindings/sound/st,stm32-spdifrx.txt56
-rw-r--r--dts/Bindings/sound/sun4i-codec.txt11
-rw-r--r--dts/Bindings/sound/sun8i-codec-analog.txt1
-rw-r--r--dts/Bindings/sound/zte,zx-aud96p22.txt24
15 files changed, 521 insertions, 91 deletions
diff --git a/dts/Bindings/sound/audio-graph-card.txt b/dts/Bindings/sound/audio-graph-card.txt
new file mode 100644
index 0000000..6e6720a
--- /dev/null
+++ b/dts/Bindings/sound/audio-graph-card.txt
@@ -0,0 +1,129 @@
+Audio Graph Card:
+
+Audio Graph Card specifies audio DAI connections of SoC <-> codec.
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Audio Graph Card property is same as Simple Card.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+
+Below are same as Simple-Card.
+
+- label
+- widgets
+- routing
+- dai-format
+- frame-master
+- bitclock-master
+- bitclock-inversion
+- frame-inversion
+- dai-tdm-slot-num
+- dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Required properties:
+
+- compatible : "audio-graph-card";
+- dais : list of CPU DAI port{s}
+
+Optional properties:
+- pa-gpios: GPIO used to control external amplifier.
+
+Example: Single DAI case
+
+ sound_card {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port>;
+ };
+
+ dai-controller {
+ ...
+ cpu_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ };
+
+ audio-codec {
+ ...
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
+
+Example: Multi DAI case
+
+ sound-card {
+ compatible = "audio-graph-card";
+
+ label = "sound-card";
+
+ dais = <&cpu_port0
+ &cpu_port1
+ &cpu_port2>;
+ };
+
+ audio-codec@0 {
+ ...
+ port {
+ codec0_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint0>;
+ };
+ };
+ };
+
+ audio-codec@1 {
+ ...
+ port {
+ codec1_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint1>;
+ };
+ };
+ };
+
+ audio-codec@2 {
+ ...
+ port {
+ codec2_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint2>;
+ };
+ };
+ };
+
+ dai-controller {
+ ...
+ ports {
+ cpu_port0: port@0 {
+ cpu_endpoint0: endpoint {
+ remote-endpoint = <&codec0_endpoint>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ cpu_port1: port@1 {
+ cpu_endpoint1: endpoint {
+ remote-endpoint = <&codec1_endpoint>;
+
+ dai-format = "i2s";
+ ...
+ };
+ };
+ cpu_port2: port@2 {
+ cpu_endpoint2: endpoint {
+ remote-endpoint = <&codec2_endpoint>;
+
+ dai-format = "i2s";
+ ...
+ };
+ };
+ };
+ };
+
diff --git a/dts/Bindings/sound/audio-graph-scu-card.txt b/dts/Bindings/sound/audio-graph-scu-card.txt
new file mode 100644
index 0000000..8b8afe9
--- /dev/null
+++ b/dts/Bindings/sound/audio-graph-scu-card.txt
@@ -0,0 +1,122 @@
+Audio-Graph-SCU-Card:
+
+Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM".
+
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Audio-Graph-SCU-Card property is same as
+Simple-Card / Simple-SCU-Card / Audio-Graph-Card.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+ ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt
+ ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+
+Below are same as Simple-Card / Audio-Graph-Card.
+
+- label
+- dai-format
+- frame-master
+- bitclock-master
+- bitclock-inversion
+- frame-inversion
+- dai-tdm-slot-num
+- dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Below are same as Simple-SCU-Card.
+
+- convert-rate
+- convert-channels
+- prefix
+- routing
+
+Required properties:
+
+- compatible : "audio-graph-scu-card";
+- dais : list of CPU DAI port{s}
+
+Example 1. Sampling Rate Conversion
+
+ sound_card {
+ compatible = "audio-graph-scu-card";
+
+ label = "sound-card";
+ prefix = "codec";
+ routing = "codec Playback", "DAI0 Playback",
+ "codec Playback", "DAI1 Playback";
+ convert-rate = <48000>;
+
+ dais = <&cpu_port>;
+ };
+
+ audio-codec {
+ ...
+
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
+
+ dai-controller {
+ ...
+ cpu_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ };
+
+Example 2. 2 CPU 1 Codec (Mixing)
+
+ sound_card {
+ compatible = "audio-graph-scu-card";
+
+ label = "sound-card";
+ prefix = "codec";
+ routing = "codec Playback", "DAI0 Playback",
+ "codec Playback", "DAI1 Playback";
+ convert-rate = <48000>;
+
+ dais = <&cpu_port0
+ &cpu_port1>;
+ };
+
+ audio-codec {
+ ...
+
+ port {
+ codec_endpoint0: endpoint {
+ remote-endpoint = <&cpu_endpoint0>;
+ };
+ codec_endpoint1: endpoint {
+ remote-endpoint = <&cpu_endpoint1>;
+ };
+ };
+ };
+
+ dai-controller {
+ ...
+ ports {
+ cpu_port0: port {
+ cpu_endpoint0: endpoint {
+ remote-endpoint = <&codec_endpoint0>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ cpu_port1: port {
+ cpu_endpoint1: endpoint {
+ remote-endpoint = <&codec_endpoint1>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/sound/cs35l35.txt b/dts/Bindings/sound/cs35l35.txt
index 016b768..77ee75c 100644
--- a/dts/Bindings/sound/cs35l35.txt
+++ b/dts/Bindings/sound/cs35l35.txt
@@ -16,6 +16,9 @@ Required properties:
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
+ - cirrus,boost-ind-nanohenry: Inductor value for boost converter. The value is
+ in nH and they can be values of 1000nH, 1200nH, 1500nH, and 2200nH.
+
Optional properties:
- reset-gpios : gpio used to reset the amplifier
diff --git a/dts/Bindings/sound/nau8825.txt b/dts/Bindings/sound/nau8825.txt
index d337423..2f5e973 100644
--- a/dts/Bindings/sound/nau8825.txt
+++ b/dts/Bindings/sound/nau8825.txt
@@ -69,6 +69,8 @@ Optional properties:
- nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
- nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
+ - nuvoton,crosstalk-bypass: make crosstalk function bypass if set.
+
- clocks: list of phandle and clock specifier pairs according to common clock bindings for the
clocks described in clock-names
- clock-names: should include "mclk" for the MCLK master clock
@@ -96,6 +98,7 @@ Example:
nuvoton,short-key-debounce = <2>;
nuvoton,jack-insert-debounce = <7>;
nuvoton,jack-eject-debounce = <7>;
+ nuvoton,crosstalk-bypass;
clock-names = "mclk";
clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index 15a7316..7246bb2 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example)
* Inputed 48kHz data will be converted to
* system specified Hz
*/
- convert-rate = <48000>;
+ simple-audio-card,convert-rate = <48000>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -141,23 +141,23 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
- convert-channels = <2>;
+ simple-audio-card,convert-channels = <2>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
- cpu@0 {
+ simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
- cpu@1 {
+ simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -368,6 +368,10 @@ Required properties:
see below for detail.
- #sound-dai-cells : it must be 0 if your system is using single DAI
it must be 1 if your system is using multi DAI
+- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+- clock-names : List of necessary clock names.
+ "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
+ "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
Optional properties:
- #clock-cells : it must be 0 if your system has audio_clkout
@@ -375,6 +379,9 @@ Optional properties:
- clock-frequency : for all audio_clkout0/1/2/3
- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
is asynchronizes with lr-clock.
+- resets : References to SSI resets.
+- reset-names : List of valid reset names.
+ "ssi-all", "ssi.X"
SSI subnode properties:
- interrupts : Should contain SSI interrupt for PIO transfer
diff --git a/dts/Bindings/sound/rockchip,pdm.txt b/dts/Bindings/sound/rockchip,pdm.txt
new file mode 100644
index 0000000..921729d
--- /dev/null
+++ b/dts/Bindings/sound/rockchip,pdm.txt
@@ -0,0 +1,39 @@
+* Rockchip PDM controller
+
+Required properties:
+
+- compatible: "rockchip,pdm"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- dmas: DMA specifiers for rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain following:
+ - "pdm_hclk": clock for PDM BUS
+ - "pdm_clk" : clock for PDM controller
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-N: One property must exist for each entry in
+ pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
+ for details of the property values.
+
+Example for rk3328 PDM controller:
+
+pdm: pdm@ff040000 {
+ compatible = "rockchip,pdm";
+ reg = <0x0 0xff040000 0x0 0x1000>;
+ clocks = <&clk_pdm>, <&clk_gates28 0>;
+ clock-names = "pdm_clk", "pdm_hclk";
+ dmas = <&pdma 16>;
+ #dma-cells = <1>;
+ dma-names = "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pdmm0_clk
+ &pdmm0_fsync
+ &pdmm0_sdi0
+ &pdmm0_sdi1
+ &pdmm0_sdi2
+ &pdmm0_sdi3>;
+ pinctrl-1 = <&pdmm0_sleep>;
+ status = "disabled";
+};
diff --git a/dts/Bindings/sound/rockchip-spdif.txt b/dts/Bindings/sound/rockchip-spdif.txt
index 1104642..4706b96 100644
--- a/dts/Bindings/sound/rockchip-spdif.txt
+++ b/dts/Bindings/sound/rockchip-spdif.txt
@@ -9,7 +9,9 @@ Required properties:
- compatible: should be one of the following:
- "rockchip,rk3066-spdif"
- "rockchip,rk3188-spdif"
+ - "rockchip,rk3228-spdif"
- "rockchip,rk3288-spdif"
+ - "rockchip,rk3328-spdif"
- "rockchip,rk3366-spdif"
- "rockchip,rk3368-spdif"
- "rockchip,rk3399-spdif"
diff --git a/dts/Bindings/sound/samsung,odroid.txt b/dts/Bindings/sound/samsung,odroid.txt
index c1ac70c..c30934d 100644
--- a/dts/Bindings/sound/samsung,odroid.txt
+++ b/dts/Bindings/sound/samsung,odroid.txt
@@ -5,11 +5,6 @@ Required properties:
- compatible - "samsung,odroidxu3-audio" - for Odroid XU3 board,
"samsung,odroidxu4-audio" - for Odroid XU4 board
- model - the user-visible name of this sound complex
- - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S
- controller
- - 'codec' subnode with a 'sound-dai' property containing list of phandles
- to the CODEC nodes, first entry must be corresponding to the MAX98090
- CODEC and the second entry must be the phandle of the HDMI IP block node
- clocks - should contain entries matching clock names in the clock-names
property
- clock-names - should contain following entries:
@@ -32,12 +27,18 @@ Required properties:
For Odroid XU4:
no entries
+Required sub-nodes:
+
+ - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S
+ controller
+ - 'codec' subnode with a 'sound-dai' property containing list of phandles
+ to the CODEC nodes, first entry must be corresponding to the MAX98090
+ CODEC and the second entry must be the phandle of the HDMI IP block node
+
Example:
sound {
compatible = "samsung,odroidxu3-audio";
- samsung,cpu-dai = <&i2s0>;
- samsung,codec-dai = <&max98090>;
model = "Odroid-XU3";
samsung,audio-routing =
"Headphone Jack", "HPL",
diff --git a/dts/Bindings/sound/simple-scu-card.txt b/dts/Bindings/sound/simple-scu-card.txt
index d6fe47e..327d229 100644
--- a/dts/Bindings/sound/simple-scu-card.txt
+++ b/dts/Bindings/sound/simple-scu-card.txt
@@ -1,35 +1,29 @@
-ASoC simple SCU Sound Card
+ASoC Simple SCU Sound Card
-Simple-Card specifies audio DAI connections of SoC <-> codec.
+Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM".
+For example, you can use this driver if you want to exchange sampling rate convert,
+Mixing, etc...
Required properties:
- compatible : "simple-scu-audio-card"
"renesas,rsrc-card"
-
Optional properties:
-- simple-audio-card,name : User specified audio sound card name, one string
- property.
-- simple-audio-card,cpu : CPU sub-node
-- simple-audio-card,codec : CODEC sub-node
+- simple-audio-card,name : see simple-audio-card.txt
+- simple-audio-card,cpu : see simple-audio-card.txt
+- simple-audio-card,codec : see simple-audio-card.txt
Optional subnode properties:
-- simple-audio-card,format : CPU/CODEC common audio format.
- "i2s", "right_j", "left_j" , "dsp_a"
- "dsp_b", "ac97", "pdm", "msb", "lsb"
-- simple-audio-card,frame-master : Indicates dai-link frame master.
- phandle to a cpu or codec subnode.
-- simple-audio-card,bitclock-master : Indicates dai-link bit clock master.
- phandle to a cpu or codec subnode.
-- simple-audio-card,bitclock-inversion : bool property. Add this if the
- dai-link uses bit clock inversion.
-- simple-audio-card,frame-inversion : bool property. Add this if the
- dai-link uses frame clock inversion.
+- simple-audio-card,format : see simple-audio-card.txt
+- simple-audio-card,frame-master : see simple-audio-card.txt
+- simple-audio-card,bitclock-master : see simple-audio-card.txt
+- simple-audio-card,bitclock-inversion : see simple-audio-card.txt
+- simple-audio-card,frame-inversion : see simple-audio-card.txt
- simple-audio-card,convert-rate : platform specified sampling rate convert
- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch)
-- simple-audio-card,prefix : see audio-routing
+- simple-audio-card,prefix : see routing
- simple-audio-card,routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
the second being the connection's source. Valid names for sources.
@@ -38,32 +32,23 @@ Optional subnode properties:
Required CPU/CODEC subnodes properties:
-- sound-dai : phandle and port of CPU/CODEC
+- sound-dai : see simple-audio-card.txt
Optional CPU/CODEC subnodes properties:
-- clocks / system-clock-frequency : specify subnode's clock if needed.
- it can be specified via "clocks" if system has
- clock node (= common clock), or "system-clock-frequency"
- (if system doens't support common clock)
- If a clock is specified, it is
- enabled with clk_prepare_enable()
- in dai startup() and disabled with
- clk_disable_unprepare() in dai
- shutdown().
+- clocks / system-clock-frequency : see simple-audio-card.txt
-Example 1. Sampling Rate Covert
+Example 1. Sampling Rate Conversion
sound {
compatible = "simple-scu-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
- simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
- simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */
+ simple-audio-card,convert-rate = <48000>;
simple-audio-card,prefix = "ak4642";
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
@@ -79,20 +64,18 @@ sound {
};
};
-Example 2. 2 CPU 1 Codec
+Example 2. 2 CPU 1 Codec (Mixing)
sound {
- compatible = "renesas,rsrc-card";
-
- card-name = "rsnd-ak4643";
- format = "left_j";
- bitclock-master = <&dpcmcpu>;
- frame-master = <&dpcmcpu>;
+ compatible = "simple-scu-audio-card";
- convert-rate = <48000>; /* see audio_clk_a */
+ simple-audio-card,name = "rsnd-ak4643";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&dpcmcpu>;
+ simple-audio-card,frame-master = <&dpcmcpu>;
- audio-prefix = "ak4642";
- audio-routing = "ak4642 Playback", "DAI0 Playback",
+ simple-audio-card,prefix = "ak4642";
+ simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"ak4642 Playback", "DAI1 Playback";
dpcmcpu: cpu@0 {
diff --git a/dts/Bindings/sound/st,stm32-i2s.txt b/dts/Bindings/sound/st,stm32-i2s.txt
new file mode 100644
index 0000000..4bda520
--- /dev/null
+++ b/dts/Bindings/sound/st,stm32-i2s.txt
@@ -0,0 +1,62 @@
+STMicroelectronics STM32 SPI/I2S Controller
+
+The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+Only some SPI instances support I2S.
+
+Required properties:
+ - compatible: Must be "st,stm32h7-i2s"
+ - reg: Offset and length of the device's register set.
+ - interrupts: Must contain the interrupt line id.
+ - clocks: Must contain phandle and clock specifier pairs for each entry
+ in clock-names.
+ - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
+ "i2sclk": clock which feeds the internal clock generator
+ "pclk": clock which feeds the peripheral bus interface
+ "x8k": I2S parent clock for sampling rates multiple of 8kHz.
+ "x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
+ - dmas: DMA specifiers for tx and rx dma.
+ See Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
+ - pinctrl-names: should contain only value "default"
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+
+Optional properties:
+ - resets: Reference to a reset controller asserting the reset controller
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
+Example:
+sound_card {
+ compatible = "audio-graph-card";
+ dais = <&i2s2_port>;
+};
+
+i2s2: audio-controller@40003800 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+ clock-names = "pclk", "i2sclk", "x8k", "x11k";
+ dmas = <&dmamux2 2 39 0x400 0x1>,
+ <&dmamux2 3 40 0x400 0x1>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s2>;
+
+ i2s2_port: port@0 {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ format = "i2s";
+ };
+ };
+};
+
+audio-codec {
+ codec_port: port@0 {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+};
diff --git a/dts/Bindings/sound/st,stm32-sai.txt b/dts/Bindings/sound/st,stm32-sai.txt
index c59a3d7..f1c5ae5 100644
--- a/dts/Bindings/sound/st,stm32-sai.txt
+++ b/dts/Bindings/sound/st,stm32-sai.txt
@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
its own clock generator and I/O lines controller.
Required properties:
- - compatible: Should be "st,stm32f4-sai"
+ - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
- reg: Base address and size of SAI common register set.
- clocks: Must contain phandle and clock specifier pairs for each entry
in clock-names.
@@ -36,6 +36,10 @@ SAI subnodes required properties:
- pinctrl-names: should contain only value "default"
- pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
Example:
sound_card {
compatible = "audio-graph-card";
@@ -43,38 +47,29 @@ sound_card {
};
sai1: sai1@40015800 {
- compatible = "st,stm32f4-sai";
+ compatible = "st,stm32h7-sai";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0x40015800 0x400>;
reg = <0x40015800 0x4>;
- clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+ clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
clock-names = "x8k", "x11k";
interrupts = <87>;
- sai1b: audio-controller@40015824 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x40015824 0x1C>;
- clocks = <&rcc 1 CLK_SAI2>;
+ sai1a: audio-controller@40015804 {
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1C>;
+ clocks = <&rcc SAI1_CK>;
clock-names = "sai_ck";
- dmas = <&dma2 5 0 0x400 0x0>;
+ dmas = <&dmamux1 1 87 0x400 0x0>;
dma-names = "tx";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1b>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-0 = <&pinctrl_sai1a>;
- sai1b_port: port@0 {
- reg = <0>;
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
- audio-graph-card,format = "i2s";
- audio-graph-card,bitclock-master = <&codec_endpoint>;
- audio-graph-card,frame-master = <&codec_endpoint>;
- };
+ sai1b_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ format = "i2s";
};
};
};
diff --git a/dts/Bindings/sound/st,stm32-spdifrx.txt b/dts/Bindings/sound/st,stm32-spdifrx.txt
new file mode 100644
index 0000000..33826f2
--- /dev/null
+++ b/dts/Bindings/sound/st,stm32-spdifrx.txt
@@ -0,0 +1,56 @@
+STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
+
+The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+IEC-60958 and IEC-61937.
+
+Required properties:
+ - compatible: should be "st,stm32h7-spdifrx"
+ - reg: cpu DAI IP base address and size
+ - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
+ - clock-names: must contain "kclk"
+ - interrupts: cpu DAI interrupt line
+ - dmas: DMA specifiers for audio data DMA and iec control flow DMA
+ See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+ - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
+
+Optional properties:
+ - resets: Reference to a reset controller asserting the SPDIFRX
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
+Example:
+spdifrx: spdifrx@40004000 {
+ compatible = "st,stm32h7-spdifrx";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc SPDIFRX_CK>;
+ clock-names = "kclk";
+ interrupts = <97>;
+ dmas = <&dmamux1 2 93 0x400 0x0>,
+ <&dmamux1 3 94 0x400 0x0>;
+ dma-names = "rx", "rx-ctrl";
+ pinctrl-0 = <&spdifrx_pins>;
+ pinctrl-names = "default";
+
+ spdifrx_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ };
+ };
+};
+
+spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+
+ codec_port: port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+};
+
+soundcard {
+ compatible = "audio-graph-card";
+ dais = <&spdifrx_port>;
+};
diff --git a/dts/Bindings/sound/sun4i-codec.txt b/dts/Bindings/sound/sun4i-codec.txt
index 3863531..2d4e10d 100644
--- a/dts/Bindings/sound/sun4i-codec.txt
+++ b/dts/Bindings/sound/sun4i-codec.txt
@@ -7,6 +7,7 @@ Required properties:
- "allwinner,sun7i-a20-codec"
- "allwinner,sun8i-a23-codec"
- "allwinner,sun8i-h3-codec"
+ - "allwinner,sun8i-v3s-codec"
- reg: must contain the registers location and length
- interrupts: must contain the codec interrupt
- dmas: DMA channels for tx and rx dma. See the DMA client binding,
@@ -25,6 +26,7 @@ Required properties for the following compatibles:
- "allwinner,sun6i-a31-codec"
- "allwinner,sun8i-a23-codec"
- "allwinner,sun8i-h3-codec"
+ - "allwinner,sun8i-v3s-codec"
- resets: phandle to the reset control for this device
- allwinner,audio-routing: A list of the connections between audio components.
Each entry is a pair of strings, the first being the
@@ -34,15 +36,15 @@ Required properties for the following compatibles:
Audio pins on the SoC:
"HP"
"HPCOM"
- "LINEIN"
- "LINEOUT" (not on sun8i-a23)
+ "LINEIN" (not on sun8i-v3s)
+ "LINEOUT" (not on sun8i-a23 or sun8i-v3s)
"MIC1"
- "MIC2"
+ "MIC2" (not on sun8i-v3s)
"MIC3" (sun6i-a31 only)
Microphone biases from the SoC:
"HBIAS"
- "MBIAS"
+ "MBIAS" (not on sun8i-v3s)
Board connectors:
"Headphone"
@@ -55,6 +57,7 @@ Required properties for the following compatibles:
Required properties for the following compatibles:
- "allwinner,sun8i-a23-codec"
- "allwinner,sun8i-h3-codec"
+ - "allwinner,sun8i-v3s-codec"
- allwinner,codec-analog-controls: A phandle to the codec analog controls
block in the PRCM.
diff --git a/dts/Bindings/sound/sun8i-codec-analog.txt b/dts/Bindings/sound/sun8i-codec-analog.txt
index 779b735..1b6e7c4 100644
--- a/dts/Bindings/sound/sun8i-codec-analog.txt
+++ b/dts/Bindings/sound/sun8i-codec-analog.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: must be one of the following compatibles:
- "allwinner,sun8i-a23-codec-analog"
- "allwinner,sun8i-h3-codec-analog"
+ - "allwinner,sun8i-v3s-codec-analog"
Required properties if not a sub-node of the PRCM node:
- reg: must contain the registers location and length
diff --git a/dts/Bindings/sound/zte,zx-aud96p22.txt b/dts/Bindings/sound/zte,zx-aud96p22.txt
new file mode 100644
index 0000000..41bb104
--- /dev/null
+++ b/dts/Bindings/sound/zte,zx-aud96p22.txt
@@ -0,0 +1,24 @@
+ZTE ZX AUD96P22 Audio Codec
+
+Required properties:
+ - compatible: Must be "zte,zx-aud96p22"
+ - #sound-dai-cells: Should be 0
+ - reg: I2C bus slave address of AUD96P22
+
+Example:
+
+ i2c0: i2c@1486000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x01486000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&audiocrm AUDIO_I2C0_WCLK>;
+ clock-frequency = <1600000>;
+
+ aud96p22: codec@22 {
+ compatible = "zte,zx-aud96p22";
+ #sound-dai-cells = <0>;
+ reg = <0x22>;
+ };
+ };