Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 40 insertions, 0 deletions

diff --git a/dts/Bindings/spi/nvidia,tegra114-spi.txt b/dts/Bindings/spi/nvidia,tegra114-spi.txt
new file mode 100644
index 0000000000..7ea701e07d
--- /dev/null
+++ b/dts/Bindings/spi/nvidia,tegra114-spi.txt
@@ -0,0 +1,40 @@
+NVIDIA Tegra114 SPI controller.
+
+Required properties:
+- compatible : should be "nvidia,tegra114-spi".
+- reg: Should contain SPI registers location and length.
+- interrupts: Should contain SPI interrupts.
+- clock-names : Must include the following entries:
+  - spi
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+Example:
+
+spi@7000d600 {
+	compatible = "nvidia,tegra114-spi";
+	reg = <0x7000d600 0x200>;
+	interrupts = <0 82 0x04>;
+	spi-max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&tegra_car 44>;
+	clock-names = "spi";
+	resets = <&tegra_car 44>;
+	reset-names = "spi";
+	dmas = <&apbdma 16>, <&apbdma 16>;
+	dma-names = "rx", "tx";
+	status = "disabled";
+};