diff options
Diffstat (limited to 'arch/arm/boards/congatec-qmx8p/lowlevel.c')
-rw-r--r-- | arch/arm/boards/congatec-qmx8p/lowlevel.c | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/arch/arm/boards/congatec-qmx8p/lowlevel.c b/arch/arm/boards/congatec-qmx8p/lowlevel.c new file mode 100644 index 0000000000..1889b9bb33 --- /dev/null +++ b/arch/arm/boards/congatec-qmx8p/lowlevel.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0 +// SPDX-FileCopyrightText: 2023 Pengutronix + +#include <common.h> +#include <debug_ll.h> +#include <asm/barebox-arm.h> +#include <asm/barebox-arm-head.h> +#include <asm/cache.h> +#include <asm/mmu.h> +#include <asm/sections.h> +#include <image-metadata.h> +#include <mach/imx/atf.h> +#include <mach/imx/debug_ll.h> +#include <mach/imx/esdctl.h> +#include <mach/imx/generic.h> +#include <mach/imx/iomux-mx8mp.h> +#include <mach/imx/imx8mp-regs.h> +#include <mach/imx/imx8m-ccm-regs.h> +#include <mach/imx/xload.h> +#include <mfd/pca9450.h> +#include <pbl/i2c.h> +#include <pbl/pmic.h> +#include <soc/fsl/fsl_udc.h> +#include <soc/imx8m/ddr.h> + +extern char __dtb_z_imx8mp_koenigbauer_alphajet_start[]; + +#define UART_PAD_CTRL MUX_PAD_CTRL(MX8MP_PAD_CTL_DSE6 | \ + MX8MP_PAD_CTL_FSEL) +/* + * SoC UART 1 is the standard console on the KB base board + */ +static void setup_uart(void) +{ + void __iomem *uart = IOMEM(MX8M_UART1_BASE_ADDR); + + imx8m_early_setup_uart_clock(); + + imx8mp_setup_pad(MX8MP_PAD_UART1_TXD__UART1_DCE_TX | UART_PAD_CTRL); + imx8mp_setup_pad(MX8MP_PAD_UART1_RXD__UART1_DCE_RX | UART_PAD_CTRL); + imx8m_uart_setup(uart); + + pbl_set_putc(imx_uart_putc, uart); + + putc_ll('>'); +} + +#define I2C_PAD_CTRL MUX_PAD_CTRL(MX8MP_PAD_CTL_DSE6 | \ + MX8MP_PAD_CTL_HYS | \ + MX8MP_PAD_CTL_PUE | \ + MX8MP_PAD_CTL_PE) + +static struct pmic_config pca9450_cfg[] = { + /* BUCKxOUT_DVS0/1 control BUCK123 output */ + { PCA9450_BUCK123_DVS, 0x29 }, + /* + * increase VDD_SOC to typical value 0.95V before first + * DRAM access, set DVS1 to 0.85v for suspend. + * Enable DVS control through PMIC_STBY_REQ and + * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H) + */ + { PCA9450_BUCK1OUT_DVS0, 0x1C }, + { PCA9450_BUCK1OUT_DVS1, 0x14 }, + { PCA9450_BUCK1CTRL, 0x59 }, + /* Kernel uses OD/OD freq for SOC */ + /* To avoid timing risk from SOC to ARM, increase + * VDD_ARM to OD voltage 0.95v + */ + { PCA9450_BUCK2OUT_DVS0, 0x1C }, + /* set WDOG_B_CFG to cold reset */ + { PCA9450_RESET_CTRL, 0xA1 }, +}; + +static void power_init_board(void) +{ + struct pbl_i2c *i2c; + + imx8mp_setup_pad(MX8MP_PAD_I2C1_SCL__I2C1_SCL | I2C_PAD_CTRL); + imx8mp_setup_pad(MX8MP_PAD_I2C1_SDA__I2C1_SDA | I2C_PAD_CTRL); + + imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_I2C1); + + i2c = imx8m_i2c_early_init(IOMEM(MX8MP_I2C1_BASE_ADDR)); + + pmic_configure(i2c, 0x25, pca9450_cfg, ARRAY_SIZE(pca9450_cfg)); +} + +extern struct dram_timing_info dram_timing_4g; + +static void start_tfa(void) +{ + /* + * If we are in EL3 we are running for the first time and need to + * initialize the DRAM and run TF-A (BL31). The TF-A will then jump + * to DRAM in EL2. + */ + if (current_el() != 3) + return; + + imx8mp_early_clock_init(); + power_init_board(); + + imx8mp_ddr_init(&dram_timing_4g, DRAM_TYPE_LPDDR4); + + imx8mp_load_and_start_image_via_tfa(); +} + +static __noreturn noinline void congatec_qmx8p_start(char dtb[]) +{ + setup_uart(); + + start_tfa(); + + /* + * Standard entry we hit once we initialized both DDR and ATF + */ + imx8mp_barebox_entry(dtb); +} + +ENTRY_FUNCTION(start_koenigbauer_alphajet, r0, r1, r2) +{ + imx8mp_cpu_lowlevel_init(); + + relocate_to_current_adr(); + setup_c(); + + congatec_qmx8p_start(__dtb_z_imx8mp_koenigbauer_alphajet_start); +} |